Difference between revisions of "Network share using SAMBA"
From Teltonika Networks Wiki
m (Žilvinas moved page Draft:Network share using samba to Network share using SAMBA) |
Shivang.amin (talk | contribs) |
||
(25 intermediate revisions by 2 users not shown) | |||
Line 4: | Line 4: | ||
The information on this page is updated in accordance with '''RUTX_R_00.07.01.4''' firmware version. | The information on this page is updated in accordance with '''RUTX_R_00.07.01.4''' firmware version. | ||
− | Samba share is a software package used to provide secure, stable, and fast file and print service for clients using SMB/CIFS protocol. It is compatible to use with | + | Samba share is a software package used to provide secure, stable, and fast file and print service for clients using SMB/CIFS protocol. It is compatible to use with windows and Linux systems. SMB is a network file sharing protocol and CIFS is a network file system protocol. CIFS is a successor of SMB, and both runs on tcp or udp using port 137 and 138 for udp, 039 and 445 for tcp. |
== Prerequisites == | == Prerequisites == | ||
Line 16: | Line 16: | ||
# Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wifi. | # Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wifi. | ||
− | # Login to the router's | + | # Login to the router's webUI, go the '''Services → USB Tools → General''' page and verify if your USB is mounted:[[File:Networking rutx configuration examples network share v1.png.png|none|thumb|970x970px|NOTE: If USB is not mounted unplug the USB and reinsert the USB drive.]] |
− | #Navigate to Network Shares and Enable it. | + | # Navigate to Network Shares and Enable it. |
− | #Configure Hostname, Description, Workgroup. | + | # Configure Hostname, Description, Workgroup. |
− | #Enable Share home-directories if you want to share home directories. Click | + | # Enable Share home-directories if you want to share home directories. |
− | #Configure Users in Users section: click | + | # Click save & apply:[[File:Networking rutx configuration examples Network share general setting.png.png|none|thumb|770x770px]] |
− | # Go back to General tab: under Shared Directories | + | # Configure Users in Users section: click save & apply:[[File:Networking rutx configuration examples network share users.png.png|none|thumb|738x738px]] |
− | #On your PC: Open Network folder and type: “ \\192.168.1.1\netshare” in address bar. | + | # Go back to General tab: under Shared Directories > click ADD button, and create a directory that you want to share and select the users that you want to share directory with. Click save & apply.[[File:Networking rutx configuration examples network share add shared directories.png]] |
− | #You need to provide user name and password that were created under Network Share | + | # On your PC: Open Network folder and type: “ \\192.168.1.1\netshare” in address bar.[[File:Networking rutx configuration examples network share on your pc.png]] |
+ | #You need to provide user name and password that were created under Network Share > Users.[[File:Networking rutx configuration examples network share credentials.png]] |
Revision as of 16:41, 26 April 2022
Introduction
This article provides information and step by step guide to configure samba share on Teltonika routers.
The information on this page is updated in accordance with RUTX_R_00.07.01.4 firmware version.
Samba share is a software package used to provide secure, stable, and fast file and print service for clients using SMB/CIFS protocol. It is compatible to use with windows and Linux systems. SMB is a network file sharing protocol and CIFS is a network file system protocol. CIFS is a successor of SMB, and both runs on tcp or udp using port 137 and 138 for udp, 039 and 445 for tcp.
Prerequisites
You will need:
- RUTX router running FW version RUTX_R_00.07.01.4 or newer.
- A computer running Windows OS.
- A USB flash drive.
Instructions
- Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wifi.
- Login to the router's webUI, go the Services → USB Tools → General page and verify if your USB is mounted:
- Navigate to Network Shares and Enable it.
- Configure Hostname, Description, Workgroup.
- Enable Share home-directories if you want to share home directories.
- Click save & apply:
- Configure Users in Users section: click save & apply:
- Go back to General tab: under Shared Directories > click ADD button, and create a directory that you want to share and select the users that you want to share directory with. Click save & apply.File:Networking rutx configuration examples network share add shared directories.png
- On your PC: Open Network folder and type: “ \\192.168.1.1\netshare” in address bar.File:Networking rutx configuration examples network share on your pc.png
- You need to provide user name and password that were created under Network Share > Users.File:Networking rutx configuration examples network share credentials.png