Jump to content

AWS MQTT cloud connection: Difference between revisions

no edit summary
No edit summary
No edit summary
Line 109: Line 109:


=== Enabling MODBUS TCP Slave ===
=== Enabling MODBUS TCP Slave ===
Enabling the MODBUS Slave option on the router allows it to answer any requests coming from a MODBUS Master. To do that, go to the router configuration page->Services->MODBUS-> MODBUS TCP Slave. Then clock the "Enable" slider and save.
Enabling the MODBUS Slave option on the router allows it to answer any requests coming from a MODBUS Master. To do that, go to the router configuration page→Services→MODBUS→MODBUS TCP Slave. Then clock the "Enable" slider and save.


[[File:Networking rutos configuration examples AWS 014.png|border|class=tlt-border]]
[[File:Networking rutos configuration examples AWS 014.png|border|class=tlt-border]]


=== Enabling MODBUS TCP Master ===
=== Enabling MODBUS TCP Master ===
Enabling the MODBUS Master option on the router allows it to make specific requests to any slave in the MODBUS network. To do that, go to the router configuration page->Services->MODBUS-> MODBUS TCP Master. Click on the "Add" button, and do the following configuration on the page:
Enabling the MODBUS Master option on the router allows it to make specific requests to any slave in the MODBUS network. To do that, go to the router configuration page→Services→MODBUS→MODBUS TCP Master. Click on the "Add" button, and do the following configuration on the page:


[[File:Networking rutos configuration examples AWS 015.png|border|class=tlt-border]]
[[File:Networking rutos configuration examples AWS 015.png|border|class=tlt-border]]
Line 145: Line 145:


=== Configuring Data to Server ===
=== Configuring Data to Server ===
Go to the router configuration page->Services->Data to server. Click on the "Add" button, and the configuration is basically the same as described on the "Publishing Bluetooth/Wifi scanner/Modbus data" section of this article, just change the data source to "MODBUS data" and format the data as you wish. You should have something similar to this.
Go to the router configuration page→Services→Data to server. Click on the "Add" button, and the configuration is basically the same as described on the "Publishing Bluetooth/Wifi scanner/Modbus data" section of this article, just change the data source to "MODBUS data" and format the data as you wish. You should have something similar to this.


[[File:Networking rutos configuration examples AWS 017.png|border|class=tlt-border]]
[[File:Networking rutos configuration examples AWS 017.png|border|class=tlt-border]]