Difference between revisions of "Template:Networking rutos manual mobile"
DominykasP (talk | contribs) |
Gytispieze (talk | contribs) |
||
(8 intermediate revisions by 2 users not shown) | |||
Line 2: | Line 2: | ||
| fw_version ={{Template: Networking_rutos_manual_latest_fw | | fw_version ={{Template: Networking_rutos_manual_latest_fw | ||
| series = {{{series}}} | | series = {{{series}}} | ||
+ | | name = {{{name}}} | ||
}} | }} | ||
}} | }} | ||
Line 19: | Line 20: | ||
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection. | The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
===SIM card settings=== | ===SIM card settings=== | ||
Line 59: | Line 26: | ||
{{#ifeq: {{{dualmodem}}} | 1 | | {{#ifeq: {{{dualmodem}}} | 1 | | ||
− | [[File: | + | [[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualmodem_v1.png|border|class=tlt-border]] | |
− | [[File: | + | [[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]]}} |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 77: | Line 44: | ||
<td>off | on; default: <b>off</b></td> | <td>off | on; default: <b>off</b></td> | ||
<td>Denies data connection on roaming conditions.</td> | <td>Denies data connection on roaming conditions.</td> | ||
− | </tr> | + | </tr>{{#ifeq:{{{name}}}|RUT230|| |
+ | <tr> | ||
+ | <td>VoLTE</td> | ||
+ | <td>Auto {{!}} On {{!}} Off; default: <b>Auto</b></td> | ||
+ | <td>Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.</td> | ||
+ | </tr>}} | ||
<tr> | <tr> | ||
<td>Service mode</td> | <td>Service mode</td> | ||
− | <td>Auto | {{#switch: {{{series}}} | + | <td>Auto | {{#ifeq:{{{5g}}}|1| 5G only {{!}} 4G only {{!}} 3G only {{!}} 5G + 4G {{!}} 5G + 3G {{!}} |}}{{#switch: {{{series}}} |
− | | RUTX = 4G (LTE) only {{!}} 3G only | + | | RUTX|RUT36X|TCR1 = 4G (LTE) only {{!}} 3G only {{!}} 4G + 3G |
− | | TRB1 = 4G (LTE) only {{!}} 3G only {{!}} 2G only | + | | TRB1|RUT9|RUT9M|RUT952|RUT2M = 4G (LTE) only {{!}} 3G only {{!}} 2G only {{!}} 4G + 3G {{!}} 4G + 2G |
| TRB2 = {{#switch: {{{name}}} | | TRB2 = {{#switch: {{{name}}} | ||
− | | TRB245 = 4G (LTE) only {{!}} 3G only {{!}} 2G only | + | | TRB245 = 4G (LTE) only {{!}} 3G only {{!}} 2G only {{!}} 4G + 3G {{!}} 4G + 2G |
− | | TRB255 = 4G (LTE) only {{!}} 2G only}} | + | | TRB255 = 4G (LTE) only {{!}} 2G only {{!}} 4G + 2G}} |
+ | | RUT2 = {{#switch: {{{name}}} | ||
+ | | RUT230 = 3G only {{!}} 2G only {{!}} 3G+2G | ||
+ | | RUT240 = 4G (LTE) only {{!}} 3G only {{!}} 2G only {{!}} 4G + 3G {{!}} 4G + 2G}} | ||
}}; default: <b>Auto</b></td> | }}; default: <b>Auto</b></td> | ||
<td>Network connection type preference.</td> | <td>Network connection type preference.</td> | ||
Line 104: | Line 79: | ||
<td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use.</td> | <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use.</td> | ||
</tr>|}} | </tr>|}} | ||
+ | </table> | ||
+ | |||
+ | ===Operator settings=== | ||
+ | ---- | ||
+ | The <b>Operator Settings</b> section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist){{#ifeq:{{{dualsim}}}|1| for specified SIM card.|.}} | ||
+ | |||
+ | [[File:Networking_rutx12_manual_mobile_general_operator_settings_v1.png|border|class=tlt-border]] | ||
+ | |||
+ | <table class="nd-mantable"> | ||
+ | <tr> | ||
+ | <th>Field</th> | ||
+ | <th>Value</th> | ||
+ | <th>Description</th> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Enable</td> | ||
+ | <td>off | on; default: <b>off</b></td> | ||
+ | <td>Enables Whitelist or Blacklist for specified operator list.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Mode</td> | ||
+ | <td>Whitelist {{!}} Blacklist; default: <b>Whitelist</b></td> | ||
+ | <td>Mode to be applied for operator list.<br> | ||
+ | <ul> | ||
+ | <li>Whitelist - only allow operators in list</li> | ||
+ | <li>Blacklist - block all operators in list</li> | ||
+ | </ul> | ||
+ | </td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Operator list</td> | ||
+ | <td>operator list; default: <b>none</b></td> | ||
+ | <td>A list of operators which can be configured in [[#Operators list|Operators List page]].</td> | ||
+ | </tr> | ||
</table> | </table> | ||
Line 110: | Line 119: | ||
The <b>SMS Limit Settings</b> section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card. | The <b>SMS Limit Settings</b> section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card. | ||
− | [[File: | + | [[File:Networking_rutos_manual_mobile_general_sms_limit_settings_v2.png|border|class=tlt-border]] |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
Line 132: | Line 141: | ||
<td>Day | Week | Month; default: <b>Day</b></td> | <td>Day | Week | Month; default: <b>Day</b></td> | ||
<td>Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.</td> | <td>Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.</td> | ||
+ | </tr> | ||
+ | <tr> | ||
+ | <td>Start hour/day</td> | ||
+ | <td>0-23 / Monday - Sunday / 0-31; default: <b>0</b></td> | ||
+ | <td>Starting hour of the day / day of the week / day of the month for SMS limiting period.</td> | ||
</tr> | </tr> | ||
<tr> | <tr> | ||
Line 260: | Line 274: | ||
</tr> | </tr> | ||
</table>|}} |}} | </table>|}} |}} | ||
+ | |||
==Network operators== | ==Network operators== | ||
{{#ifeq: {{{name}}}|TRB255| | | {{#ifeq: {{{name}}}|TRB255| | | ||
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}} |}} | The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}} |}} | ||
− | [[File: | + | {{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualmodem.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]] |
− | + | }} | |
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
Line 304: | Line 319: | ||
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>. | To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>. | ||
− | [[File: | + | {{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualmodem_v1.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]] }} |
− | Will be prompted with a pop-up asking if you're sure. Click ' | + | Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed. |
− | [[File: | + | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_2.png|border|class=tlt-border]] |
Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes. | Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes. |
Revision as of 12:11, 1 September 2022
Template:Networking rutos manual fw disclosure
Summary
The Mobile page is used to configure mobile connection settings.
This manual page provides an overview of the Mobile page in {{{name}}} devices.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
General
The General section is used to configure SIM card parameters that define how the device will establish a mobile connection.
SIM card settings
The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]]
Field | Value | Description |
---|---|---|
Deny data roaming | off | on; default: off | Denies data connection on roaming conditions. |
VoLTE | Auto | On | Off; default: Auto | Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data. |
Service mode | Auto | ; default: Auto | Network connection type preference. |
PIN | integer [0000..99999999]; default: none | SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in flash memory therefore it does not reset when default settings are restored. |
Operator settings
The Operator Settings section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist).
Field | Value | Description |
---|---|---|
Enable | off | on; default: off | Enables Whitelist or Blacklist for specified operator list. |
Mode | Whitelist | Blacklist; default: Whitelist | Mode to be applied for operator list.
|
Operator list | operator list; default: none | A list of operators which can be configured in Operators List page. |
SMS limit settings
The SMS Limit Settings section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.
Field | Value | Description |
---|---|---|
Enable SMS Limit | off | on; default: off | Turns SMS limiting on or off. |
SMS limit count | integer; default: none | Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period. |
Period | Day | Week | Month; default: Day | Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset. |
Start hour/day | 0-23 / Monday - Sunday / 0-31; default: 0 | Starting hour of the day / day of the week / day of the month for SMS limiting period. |
Clear SMS Limit | - (interactive button) | Clears the SMS limit counter for the selected period. |
Network operators
The Network operators section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to.
[[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]
Field | Value | Description |
---|---|---|
Current operator | string; default: none | Displays the name of the operator the which the device is currently connected. |
Connection mode | Auto | Manual | Manual-Auto; default: Auto | Operator selection method.
|
Manual operator selection
To select an operator manually, specify Connection mode: Manual and click 'Scan For Operators'.
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]]
Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.
Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.
Once the scan has finished, you will see the results in the 'Operators List'.
In order to lock the SIM card to using a single operator, place a check mark next to the relevant entry in the list and click 'Save & Apply'.
Operators list
This section is used to create lists of operators codes, which can then be used in Operator settings section to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).
By clicking Edit on a list you will be redirected to editing page in which you can enter operator codes for that list.
[[Category:{{{name}}} Network section]]