TRB500 Services: Difference between revisions
Gytispieze (talk | contribs) (Created page with "{{Template: Networking_rutos_manual_services <!------------------------DEVICE-----------------------> | name = TRB500 | series = TRB5 }}") |
Gytispieze (talk | contribs) m (Gytispieze moved page Draft:TRB500 Services to TRB500 Services without leaving a redirect) |
(No difference)
| |
Latest revision as of 10:19, 5 September 2022
Main Page > TRB Gateways > TRB500 > TRB500 Manual > TRB500 WebUI > TRB500 Status section > TRB500 ServicesThe information in this page is updated in accordance with firmware version TRB5_R_00.07.10.2
Note: Firmware versions before TRB5_R_00.07.04.4 will not be supported by devices from batch 09 and higher..
Summary
The Services page is used for easy service management. From here you can check the status of most services and find a link to each of their configuration pages.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
Services
The Services list displays the status of most of the device's services.
Additional notes:
- The figure above is only an example. The actual ordering of the services on your devices will differ.
- Most services can be configured from the WebUI's 'Services' tab. Search the TRB500 Services section for guidance.
- The rightmost column contains a 'Change Settings' button next to each service. If you click on of these buttons, you will be redirected to the respective service's configuration window.
For example: if you click 'Change Settings' next to the RMS service, you will be redirected to the Services → Cloud Solution → RMS page.