Difference between revisions of "Ironwifi.com Hotspot Configuration on Legacy firmware"

From Teltonika Networks Wiki
(Created page with "==Summary== This chapter is a guide on configuring ironwifi.com provider '''hotspot''' instance on RUTX routers. This setup is also applicable to RUT series devices. ==Step 1...")
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Summary==
 
==Summary==
  
−
This chapter is a guide on configuring ironwifi.com provider '''hotspot''' instance on RUT routers.
+
This chapter is a guide on configuring ironwifi.com provider '''hotspot''' instance on RUTX routers. This setup is also applicable to RUT series devices.
−
 
+
==Step 1: cobot.me configuration ==
−
==Step 1: ironwifi.com configuration ==
+
===Login===
−
===Login screen===
 
 
----
 
----
−
We need to login into '''console.ironwifi.com/login''' system using our credentials. If you don't have a registered account then you need to create one. You can do that by clicking '''Create Account'''.
+
First, go to '''console.ironwifi.com/login''' and log into your account. If you don't have a registered account then you will need to create one - click '''Open Account.'''
 +
[[File:Ironwifilogin2.png|border|center]]
 +
====Sign Up====
  
−
[[File:Login.png | border| class=tlt-border]]
+
After clicking '''Open Account''' you will be redirected to register page. Enter you account information and click '''Submit'''. To complete registration go to your email inbox.
  
−
===Create new network===
+
[[File:Ironregister56.png|border|center]]
−
----
 
−
In the opened browser window click '''Networks'''
 
  
−
[[File:ClickNetworks.png| border| class=tlt-border]]
 
  
−
Click '''New Network'''
 
  
−
[[File:ClickNewNetwork.png| border| class=tlt-border]]
 
  
−
Type '''name''' of new network and select '''region'''
+
===Set Up new radius server===
−
 
+
----
−
Click '''Create network'''
+
In the opened window click '''Networks.'''
−
 
+
[[File:Ironuser5.png|border|center|1220x1220px]]
−
[[File:CreateNetwork.png| border| class=tlt-border]]
 
−
 
 
−
Click on your '''created network'''
 
  
−
[[File:ClickOnnewnetwork2.png| border| class=tlt-border]]
 
  
 +
Then - '''New Network''' and you will be prompted to create a new network.
 +
[[File:Ironguest6.png|border|center|1306x1306px]]
 +
Enter your desired network name can click '''Create'''.
 +
[[File:Ironradius1.png|border|center]]
 
===Network details===
 
===Network details===
  
−
Here are the data that we will need in the next step:
+
Click on your '''created network.'''
 +
[[File:Irondata1.png|border|center|1142x1142px]]
 +
You will be taken to a window where all detailed Radius server information will be displayed.
 +
[[File:Ironnetwork details.png|border|center|1152x1152px]]
 +
===Add Wifi Guest Accounts===
  
−
'''Radius ip Address''' : 130.211.107.8
+
Open '''Users''' tab and create N'''ew User''' for your WiFi.
 +
[[File:Ironguest.png|border|center|1388x1388px]]
 +
Type '''Username''' and click '''Create User.'''
 +
[[File:Iron guest1.png|border|center]]
 +
Click on your user.
 +
[[File:Irongust6.png|border|center]]
 +
To set a password click on the '''Password.'''
 +
[[File:Ironpassowrd.png|border|center|776x776px]]
  
−
'''Authentication Port''' : 6375
 
  
−
'''Accounting Port'''     : 6376
+
All created users is displayed under '''Users''' tab.
−
 
+
[[File:Ironguestg.png|border|center|1266x1266px]]
−
'''Shared Secret'''      : goDkt2Abuv74PQ0
+
==Step 2: Router configuration ==
−
 
 
−
'''''! Replace all these (4) values from the ones in your IronWifi account. These values are user-specific. !'''''
 
−
 
 
−
[[File:NetworkDetails.png| border| class=tlt-border]]
 
−
 
 
−
===Create new user===
 
−
 
 
−
Click '''Users'''
 
−
 
 
−
[[File:ClickUsers.png| 1150]]
 
−
 
 
−
Click '''New User'''
 
−
 
 
−
[[File:ClickUserNewuser.png|1150]]
 
−
 
 
−
Type '''Username''' and click '''Create User'''
 
−
 
 
−
[[File:DemoUser.png|1150]]
 
−
 
 
−
Click on your user
 
  
−
[[File:ClickDemoUser.png| 1150]]
+
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should '''turn on "Advanced WebUI" mode'''. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
 +
[[File:Networking rutx manual webui basic advanced mode.gif|border|center]]
 +
===Creating wireless access point===
  
−
Set new password and click '''ENTER'''
+
If you have already set up your wireless access point - skip this step.
  
−
[[File:Changepw.png| border| class=tlt-border]]
+
* Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
 +
* Go to the '''Network → Wireless''' page.
 +
* '''Click 'Add'''' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz ('''1''') or 5 GHz ('''2''') Access Point.
  
−
==Step 2: Router configuration ==
+
[[File:Wifirut.png|border|center]]
  
−
Now we need to open our RUT homepage. You can access the website by entering 192.168.1.1 in your internet browser's URL bar.
+
Edit your new Access Point as below:
  
−
Open the hotspot configuration panel by clicking '''Services → Hotspot'''
+
# Check '''Enable;'''
 +
# Mode - '''Access Point''';
 +
# ESSID - Your desired Extended Service Set Identifier name;
 +
# Network - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network.
 +
[[File:APconfig1.png|border|center]]
  
−
[[File:RclickHotspot.png| border| class=tlt-border]]
+
Navigate to '''Wireless Security''' tab and choose your '''Encryption''' method '''(1)'''. When you are done, click '''Save & Apply (2)'''.
  
−
Click '''Edit'''
+
[[File:APsecu.png|border|center]]
 +
===Set up hotspot===
  
−
[[File:RclickEdit.png| border| class=tlt-border]]
+
Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''.
  
−
Use configuration details from '''Step 1'''.
+
[[File:Hotspota.png|border|center]]
  
−
Check '''enable''' and '''Terms of service''' box
+
'''Hotspot configuration'''
  
−
Select '''External radius''' from '''Authentication mode''' dropbox
+
In the '''General tab''' do the following steps:
  
−
Type configuration details '''RADIUS Server''', '''Authentication port''', '''Accounting por'''t and '''Radius secret key'''
+
# Check '''Enable;'''
 +
# Authentication mode - '''Radius'''.
 +
[[File:Hotspotgentab.png|border|center]]
  
−
[[File:Rsetting.png| border| class=tlt-border]]
 
  
−
Click '''save'''
+
Then go to '''Radius''' tab and enter the Radius server configuration details from cobot:
  
−
Wait up to '''5''' minutes from the time you saved the changes.
+
# '''RADIUS Servers''' - 35.189.111.2, 35.189.127.125;
 +
# '''Authentication port''' - 22035;
 +
# '''Accounting port''' - 22036;
 +
# '''NAS Identifie'''r - 22035;
 +
#'''Radius secret key''' - aG7ilh2QgAHR6exu;
 +
# '''Save & Apply'''.
 +
[[File:Irohotspot.png|border|center]]
  
−
==Test your hotspot==
+
==Test your Hotspot==
  
 
Try connecting to your router using computer or mobile phone.
 
Try connecting to your router using computer or mobile phone.
  
−
Select your router.
+
* Select the newly created hotspot;
−
 
+
* After successful connection visit any website and you will be redirected to hotspot login page. Type your username and password;
−
[[File:Find.jpg| border| class=tlt-border]]
+
* Click '''Login;'''
−
 
+
* You should see a message '''Authorization Successful;'''
−
Type your username and password.
 
−
 
 
−
Click '''Login'''
 
−
 
 
−
[[File:LoginRouter.jpg| border| class=tlt-border]]
 
−
 
 
−
You should see a message '''Authorization Successful'''
 
  
−
[[File:Successs.jpg| border| class=tlt-border]]
+
[[File:Phonehostpotccobot.png|border|center]]
  
−
==See also==
 
−
https://www.ironwifi.com/
 
  
−
[[Ironwifi.com Hotspot Configuration on RutOS firmware]]
+
==External links==
 +
http://www.cobot.me
  
−
[[Category:WiFi]]
+
[[Category:IoT]]

Revision as of 08:16, 19 September 2022

Main Page > IoT Platforms > WiFi > Ironwifi.com Hotspot Configuration on Legacy firmware

Summary

This chapter is a guide on configuring ironwifi.com provider hotspot instance on RUTX routers. This setup is also applicable to RUT series devices.

Step 1: cobot.me configuration

Login

First, go to console.ironwifi.com/login and log into your account. If you don't have a registered account then you will need to create one - click Open Account.

Ironwifilogin2.png

Sign Up

After clicking Open Account you will be redirected to register page. Enter you account information and click Submit. To complete registration go to your email inbox.

Ironregister56.png



Set Up new radius server

In the opened window click Networks.

Ironuser5.png


Then - New Network and you will be prompted to create a new network.

Ironguest6.png

Enter your desired network name can click Create.

Ironradius1.png

Network details

Click on your created network.

Irondata1.png

You will be taken to a window where all detailed Radius server information will be displayed.

Ironnetwork details.png

Add Wifi Guest Accounts

Open Users tab and create New User for your WiFi.

Ironguest.png

Type Username and click Create User.

Iron guest1.png

Click on your user.

Irongust6.png

To set a password click on the Password.

Ironpassowrd.png


All created users is displayed under Users tab.

Ironguestg.png

Step 2: Router configuration

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Networking rutx manual webui basic advanced mode.gif

Creating wireless access point

If you have already set up your wireless access point - skip this step.

  • Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
  • Go to the Network → Wireless page.
  • Click 'Add' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz (1) or 5 GHz (2) Access Point.
Wifirut.png

Edit your new Access Point as below:

  1. Check Enable;
  2. Mode - Access Point;
  3. ESSID - Your desired Extended Service Set Identifier name;
  4. Network - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network.
APconfig1.png

Navigate to Wireless Security tab and choose your Encryption method (1). When you are done, click Save & Apply (2).

APsecu.png

Set up hotspot

Navigate to Services → Hotspot and add a new Hotspot Instance. To do so, find the Add New Instance section and select your Wireless AP in the interface list, then press Add.

Hotspota.png

Hotspot configuration

In the General tab do the following steps:

  1. Check Enable;
  2. Authentication mode - Radius.
Hotspotgentab.png


Then go to Radius tab and enter the Radius server configuration details from cobot:

  1. RADIUS Servers - 35.189.111.2, 35.189.127.125;
  2. Authentication port - 22035;
  3. Accounting port - 22036;
  4. NAS Identifier - 22035;
  5. Radius secret key - aG7ilh2QgAHR6exu;
  6. Save & Apply.
Irohotspot.png

Test your Hotspot

Try connecting to your router using computer or mobile phone.

  • Select the newly created hotspot;
  • After successful connection visit any website and you will be redirected to hotspot login page. Type your username and password;
  • Click Login;
  • You should see a message Authorization Successful;
Phonehostpotccobot.png


External links

http://www.cobot.me

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Ironwifi.com_Hotspot_Configuration_on_Legacy_firmware&oldid=95680"