510
edits
Changes
Data transfer from Modbus TCP to Modbus RTU Gateway (view source)
Revision as of 12:10, 9 November 2022
, 12:10, 9 November 2022→Configuring the router
[[File:Moreconfigurationoptions.png|border|class=tlt-border]]
[[File:Moreconfigurationoptions.png|border|class=tlt-border]]
In IP filter options on the serial configuration page, add IP addresses that will be allowed to reach your Modbus gateway (input 0.0.0.0/0 to allow any IP address).
[[File:Ipfilter1.png|border|class=tlt-border]]
After finishing the configuration, press '''Save & Apply'''. With a setup like this, you will be able to send data from Modbus TCP to Modbus RTU.
After finishing the configuration, press '''Save & Apply'''. With a setup like this, you will be able to send data from Modbus TCP to Modbus RTU.