Network share using SAMBA: Difference between revisions
m (Žilvinas moved page Network share using SAMBA to Network share using samba over a redirect without leaving a redirect) |
m (Žilvinas moved page Draft:Network share using samba to Network share using SAMBA) |
(One intermediate revision by the same user not shown) | |
(No difference)
|
Latest revision as of 14:52, 5 May 2022
Introduction
This article provides information and step by step guide to configure samba share on Teltonika routers.
The information on this page is updated in accordance with RUTX_R_00.07.01.4 firmware version.
Samba share is a software package used to provide secure, stable, and fast file and print service for clients using SMB/CIFS protocol. It is compatible to use with Windows and Linux systems. SMB is a network file sharing protocol and CIFS is a network file system protocol. CIFS is a successor of SMB, and both runs on tcp or udp using port 137 and 138 for UDP, 139 and 445 for TCP.
Prerequisites
You will need:
- RUTX router running FW version RUTX_R_00.07.01.4 or newer.
- A computer running Windows OS.
- A USB flash drive.
Instructions
- Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wifi.
- Login to the router's WebUI, go the Services → USB Tools → General page and verify if your USB is mounted:
- Navigate to Network Shares and Enable it.
- Configure Hostname, Description, Workgroup.
- Enable Share home-directories if you want to share home directories. Click Save & Apply.
- Configure Users in Users section: click Save & Apply:
- Go back to General tab: under Shared Directories → click ADD button, and create a directory that you want to share and select the users that you want to share directory with. Click Save & Apply.
- On your PC: Open Network folder and type: “ \\192.168.1.1\netshare” in address bar.
- You need to provide user name and password that were created under Network Share → Users.