Template:Configuration examples RUTOS: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(52 intermediate revisions by 8 users not shown)
Line 1: Line 1:
This page contains various configuration guides for the {{#ifeq: {{{main}}} | 1 | Teltonika Networks routers | {{{name}}} router}}. Unlike the articles in the {{#ifeq: {{{main}}} | 1 | router manuals | <b>[[{{{name}}} Manual]]</b>}}, which provide more general knowledge on all of the router's features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren't OS specific in any way and apply to any system.
This page contains various configuration guides for the {{#ifeq: {{{main}}} | 1 | Teltonika Networks routers | {{{name}}} router}}. Unlike the articles in the {{#ifeq: {{{main}}} | 1 | router manuals | <b>[[{{{name}}} Manual]]</b>}}, which provide more general knowledge on all of the router's features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren't OS-specific in any way and apply to any system.
 
{{#ifeq: {{{main}}} | 1 | [[Category:{{{name}}}]] | [[Category:{{{name}}} Configuration example]]}}
 


__TOC__
__TOC__


==Router control and monitoring==
{{#ifeq: {{{routerOrGateway}}} | 1 |
===Router control and monitoring===


* [[Configuration Backup RutOS|Configuration Backup]]
<ul>
* [[Command Line Interfaces RutOS|Command line interfaces]]
    <li>[[Configuration Backup RutOS|Configuration Backup]]</li>
* [[Monitoring via MQTT|MQTT (Linux guide)]]
    <li>[[Command Line Interfaces RutOS|Command line interfaces]]</li>
* [[UCI command usage]]
    <li>[[Monitoring via MQTT|MQTT (Linux guide)]]</li>
* [[Crontabs]]
    <li>[[UCI command usage]]</li>
* [[SSH RSA key authentication (Linux)]]
    <li>[[Crontabs]]</li>
* [[SSH RSA key authentication (Windows)]]
    <li>[[SSH RSA key authentication (Linux)]]</li>
* [[Blocking Internet Access for LAN Clients]]
    <li>[[SSH RSA key authentication (Windows)]]</li>
* [[Monitoring with ThingsBoard IoT Platform]]
    <li>[[Monitoring with ThingsBoard IoT Platform]]</li>
* [[DHCP Relay configuration example| DHCP relay]]
    <li>[[Monitoring via JSON-RPC windows RutOS|Monitoring via JSON-RPC windows]]</li>
* [[Monitoring via JSON-RPC windows RutOS|Monitoring via JSON-RPC windows]]
    <li>[[Monitoring via JSON-RPC linux RutOS|Monitoring via JSON-RPC linux]]</li>
* [[Monitoring via JSON-RPC linux RutOS|Monitoring via JSON-RPC linux]]
    <li>[[Monitoring via Zabbix]]</li>
* [[VLAN Inter-Zone accessibility control configuration example]]
    <li>[[Firewall traffic rules]]</li>
    <li>[[Removing_of_HTTPS_security_warning|Removing of HTTPS security warning]]</li>
    <li>[[MQTT broker bridge]]</li>
    <li>[[OPC UA Configuration Example]]</li>
    <li>[[Setting up external Radius server for RUTOS authentication]]</li>
    <li>[[SSHFS]]</li>
    <li>[[TLS_Certificates|Certificate generation configuration example]]</li>
   
</ul>
===VPN===


==Modbus==
<ul>
    <li>[[DMVPN_with_IPsec_Phase_3 | DMVPN configuration example]]</li>
    <li>[[DMVPN_(Phase_3)_with_OSPF_configuration_example| DMVPN with OSPF configuration example]]</li>
    <li>[[OpenVPN configuration examples|OpenVPN configuration example]]</li>
    <li>[[IPsec RUTOS configuration example|IPsec cofiguration example]]</li>
    <li>[[ZeroTier One VPN configuration RutOS|ZeroTier One VPN configuration example]]</li>
    <li>[[ZeroTier Configuration|ZeroTier configuration example]]</li>
    <li>[[L2TP configuration examples RutOS| L2TP configuration example]]</li>
    <li>[[Overlapping subnets with IPsec solution]]</li>
    <li>[[Setting up a GRE over IPsec tunnel between RUTOS devices|GRE over IPsec Tunnel]]</li>
    <li>[[IPsec_Tunnel_with_X.509_Authentication_configuration_example]]</li>
    <li>[[L2TP over IPsec RutOS| L2TP over IPsec RutOS]]</li>
    <li>[[Default_IPsec_route_configuration_between_Teltonika_and_Fortigate_devices|Fortigate IPsec default route configuration example]]</li>
    <li>[[IPsec_site_to_site_configuration_between_Teltonika_and_Fortigate_devices|Fortigate IPsec site to site configuration example]]</li>
    <li>[[Setting up an IPsec tunnel between Teltonika Networks and Cisco devices|Cisco IPsec]]</li>
    <li>[[Setting up a GRE tunnel between Teltonika Networks and Cisco devices| Cisco GRE]]</li>
    <li>[[Setting up a GRE over IPsec tunnel between Teltonika Networks and Cisco devices]]</li>
    <li>[[Setting up a GRE over IPsec tunnel between Teltonika Networks and Mikrotik devices|Mikrotik GRE over IPsec Tunnel]]</li>
    <li>[[Setting up a SSTP tunnel between Teltonika Networks and Mikrotik devices|Mikrotik SSTP]]</li>
    <li>[[Setting up an OpenVPN tunnel between Teltonika Neworks and Mikrotik devices|Mikrotik OpenVPN]]</li>
    <li>[[Setting up a L2TP over IPsec tunnel between Teltonika Networks and Mikrotik devices|Mikrotik L2TP over IPsec]]</li>
    <li>[[Creating OpenVPN access server and connecting it to a Teltonika Networks router|OpenVPN Access Server]]</li>
    <li>[[OpenVPN_Access_Control|OpenVPN Access control]]</li>
    <li>[[Setting up an IPsec tunnel between RUT and Android phone]]</li>
    <li>[[Tinc VPN configuration examples]]</li>
    <li>[[L2TP over IPsec PC|L2TP over IPsec VPN to a PC configuration example]]</li>
    <li>[[OpenVPN traffic split]]</li>
    <li>[[Default_IPsec_route_configuration_between_Teltonika_Networks_devices | Default IPsec route configuration between Teltonika Networks devices]]</li>
    <li>[[OpenVPN over Stunnel RutOS|OpenVPN over Stunnel]]</li>
    <li>[[L2 LAN bridging over internet using L2TPv2+EoIP]]</li>
    <li>[[1NCE Configuration]]</li>
    <li>[[RutOS ExpressVPN configuration example|ExpressVPN configuration example]]</li>
    <li>[[RutOS NordVPN configuration example|NordVPN configuration example]]</li>
</ul>
===IoT platforms===
<ul>
    <li>[[Azure IoT Hub Cloud Connection]]</li>
    <li>[[Cumulocity Configuration | Cumulocity]]</li>
    <li>[[Da³vid configuration example|da³vid]]</li>
    <li>[[AWS MQTT cloud connection|AWS MQTT cloud connection]]</li>
    <li>[[BAG·Tower|BAG Tower]]</li>
    <li>[[N3uron Notifier]]</li>
</ul>
===DLMS===
<ul>
    <li>[[DLMS_client_configuration_example|DLMS client configuration example]]</li>
</ul>
===PC===
====Windows====
<ul>
    <li>[[Setting up a Static IP address on a Windows 10 PC|Static IP address setup (Windows 10)]]</li>
    <li>[[OpenVPN client on Windows]]</li>
    <li>[[OpenVPN server on Windows]]</li>
    <li>[[How to generate TLS certificates (Windows)?|TLS certificates (Windows)]]</li>{{#ifeq: {{{lan}}} | 1 |<li>[[Wake on LAN PC setup (Windows)]]</li>|}}
</ul>
====Linux====
<ul>
    <li>[[Setting up a Static IP address on a Ubuntu 16.04 PC|Static IP address setup (Ubuntu 16)]]</li>
    <li>[[Setting up an FTP server on a Ubuntu 16.04 PC|FTP server (Ubuntu 16)]]</li>
    <li>[[OpenVPN client on Linux]]</li>
    <li>[[How to generate TLS certificates (Ubuntu 18)?|TLS certificates (Ubuntu 18)]]</li>
</ul>
===DDNS===
<ul>
    <li>[[Noip.com_DDNS_configuration_RUTOS|Noip.com DDNS configuration example]]</li>
    <li>[[Dynu.com_DDNS_configuration_RUTOS|Dynu.com DDNS configuration example]]</li>
</ul>
===System upgrades===
<ul>
    {{#ifeq: {{{bootloader}}} | 1  |<li>[[{{{series}}}_Firmware_via_The_Bootloader_Menu|Firmware upgrade via the Bootloader Menu]]</li>|}}
    <li>[[Firmware_upgrade_via_command_line|Firmware upgrade via command line]]</li>
</ul>
===DNP3===
<ul>
    <li>[[DNP3_TCP_Client_Configuration_example|DNP3 TCP client configuration example]]</li>
</ul>
===SNMP===
<ul>
    <li>[[{{{name}}}_SNMP|SNMP configuration example]]</li>
</ul>
===Camera===
<ul>
{{#ifeq: {{{lan}}} | 1 |<li>[[Camera access from VPN RUTOS]]</li>
<li>[[Hikvision: remote camera access|Remote camera access]]</li>|}}
<li>[[Camera access from smartphone]]</li>
</ul>
|}}
{{#ifeq: {{{wifi}}} | 1 |
===Wireless===


{{#ifeq: {{{main}}} | 1 |* [[Monitoring via Modbus RUTOS | Monitoring via Modbus]] | {{#ifeq: {{{haslegacy}}} | 1 |*  [[{{{name}}} Monitoring via Modbus RUTOS | Monitoring via Modbus]] |* [[{{{name}}} Monitoring via Modbus | Monitoring via Modbus]]}}<br>}}
<ul>
* [[Modbus custom register block]]
    <li>[[WiFi_WAN_example|Wi-Fi WAN configuration example]]</li>
* [[Modbus TCP Slave Send SMS example]]
    <li>[[How_to_set_up_a_guest_WiFi_network|Guest Wi-Fi network configuration example]]</li>
* [[Modbus RTU Master MQTT Serial Gateway]]
    <li>[[Wireless_Mesh_configuration_example|Wireless Mesh configuration example]]</li>
    <li>[[RUTOS_relay_/_Wi-Fi_extender_/_repeater_/_bridge_configuration|Relay / Wi-Fi extender / Repeater/ Bridge configuration example]]</li>
    <li>[[WiFi_roaming_setup_for_home/small_office|Wi-Fi roaming setup for home or small office]]</li>
    <li>[[Connecting_to_a_Hotspot_WiFi_for_Internet_Connectivity|Connecting to a Hotspot Wi-Fi for internet connectivity]]</li>
    <li>[[Setting_up_external_Radius_server_for_Hotspot_authentication|Setting up external Radius server for Hotspot authentication]]</li>
    <li>[[Relayd_RutOS|Relayd]]</li>
    <li>[[IdBlender Secure WiFi Setup - RUTX Routers|IdBlender Secure WiFi Setup]]</li>
    <li>[[Guglielmo LUMEN® AAA WiFi Setup|Guglielmo LUMEN® AAA WiFi Setup]]</li>
    <li>[[Extending_Router_Hotspot_Network_with_TAP100|Extending Router Hotspot Network with TAP100]]</li>


==DNP3==
</ul>
|}}


* [[DNP3_TCP_Master]]


==System upgrades==
{{#ifeq: {{{wan}}} | 1 |
===WAN===
<ul>
    <li>[[Setting up WAN as LAN]]</li>
    <li>[[Load Balancing Rules/Policies examples]]</li>
    <li>[[OSPF Route Failover]]<li>
    <li>[[VRRP example|VRRP configuration example]]</li>
    <li>[[Starlink_Failover_Configuration|Starlink Failover Configuration]]</li>
</ul>
|}}
{{#ifeq: {{{lan}}} | 1 |
===LAN===


{{#switch: {{{series}}}
<ul>
| RUT2xx | RUT9xx = * [[{{{series}}} Bootloader Upgrade | Bootloader Upgrade]] 
    <li>[[Setting up a PPPoE between Teltonika Networks router and a Mikrotik device]]</li>
* [[{{{series}}} Firmware via The Bootloader Menu|Firmware upgrade via the Bootloader Menu]] 
    <li>[[VLAN Inter-Zone accessibility control configuration example]]</li>
| RUTX | RUTM | TRB2xx | TCR1xx = * [[{{{series}}}xx Firmware via The Bootloader Menu|Firmware upgrade via the Bootloader Menu]]
    <li>[[LAN as WAN RutOS | LAN as WAN configuration example]]</li>
| General Information = * [[Firmware via The Bootloader Menu|Firmware upgrade via the Bootloader Menu]]
    <li>[[VLAN: Tag-Based RUTOS | VLAN: Tag-Based configuration example]]</li>
}}
    <li>[[Blocking_Internet_Access_for_LAN_Clients|Blocking Internet access for LAN clients]]</li>
* [[Firmware upgrade via command line]]{{#ifeq: {{{sim}}} | 1 |<br>
    <li>[[VLAN_Set_Up|VLAN Set Up configuration example]]</li>
==Modem control==
    <li>[[VXLAN_Configuration_Example|VXLAN configuration example]]</li>
 
</ul>
* [[AT Commands]]
===DHCP===
* [[Locking Devices to a Mobile Cell]]
<ul>
* [[RUTOS_gsmctl_Commands | RUTOS gsmctl Commands]]
    <li>[[DHCP Relay configuration example]]</li>
* [[Multi-APN | Multi-APN (Multiple PDN)]]}}{{#ifeq: {{{eth}}} | 1 |<br>
    <li>[[DHCP_RELAY_over_L2TPv3|DHCP Relay over L2TPv3]]</li>
==LAN==
</ul>
*[[Setting up a PPPoE between Teltonika Networks router and a Mikrotik device]]
|}}
{{#ifeq: {{{wan}}} | 1 |*[[Setting up WAN as LAN]]
{{#ifeq: {{{usb}}} | 1 |
*[[LAN as WAN RutOS]]}}}}{{#ifeq: {{{wifi}}} | 1 |<br>
===USB===
==WiFi==
 
* [[How to set up a guest WiFi network]]
* [[WiFi roaming setup for home/small office]]
* [[RUTOS relay / Wi-Fi extender / repeater / bridge configuration]]}}{{#ifeq: {{{eth}}} | 1 |<br>
==Connection backup==
 
* [[VRRP example|VRRP]]}}
 
==VPN==
 
* [[DMVPN_with_IPsec_Phase_3 | DMVPN]]
* [[OpenVPN configuration examples RUT R 00.07|OpenVPN configuration example]]
* [[IPsec RUTOS configuration example|IPsec cofiguration example]]
* [[ZeroTier One VPN configuration RutOS|ZeroTier One VPN configuration example]]
* [[L2TP configuration examples RutOS| L2TP configuration examples]]
* [[Overlapping subnets with IPsec solution]]
* [[Setting up a GRE over IPsec tunnel between RUTOS devices|GRE over IPsec Tunnel]]
* [[L2TP over IPsec RutOS| L2TP over IPsec RutOS]]
* [[Setting up an IPsec tunnel between Teltonika Networks and Cisco devices|Cisco IPsec]]
* [[Setting up a GRE tunnel between Teltonika Networks and Cisco devices| Cisco GRE]]
* [[Setting up a GRE over IPsec tunnel between Teltonika Networks and Mikrotik devices|Mikrotik GRE over IPsec Tunnel]]
* [[Setting up a SSTP tunnel between Teltonika Networks and Mikrotik devices|Mikrotik SSTP]]
* [[Setting up an OpenVPN tunnel between Teltonika Neworks and Mikrotik devices|Mikrotik OpenVPN]]
* [[Setting up a L2TP over IPsec tunnel between Teltonika Networks and Mikrotik devices|Mikrotik L2TP over IPsec]]
* [[Creating OpenVPN access server and connecting it to a Teltonika Networks router|OpenVPN Access Server]]
* [[L2TP over IPsec PC|L2TP over IPsec VPN to a PC configuration example]]
* [[OpenVPN traffic split]]
* [[Default route configuration between Teltonika Networks devices]]
* [[OpenVPN over Stunnel RutOS|OpenVPN over Stunnel]]
* [[DMVPN with IPsec Phase 3]]
 
==DDNS==
 
* [[Noip.com DDNS configuration RUTOS|noip.com]]
* [[Dynu.com DDNS configuration RUTOS|dynu.com]]{{#ifeq: {{{usb}}} | 1 |<br>
==USB==
 
* [[How to set up a USB printer (Windows) RUTOS | How to set up a USB printer (Windows)]]}}{{ #ifeq: {{{rs232}}} | 1 | {{ #ifeq: {{{rs485}}} | 1 |<br>
==RS232/485==
 
* [[Data transfer from Modbus TCP to Modbus RTU Gateway]]
* [[BACnet configuration example]]
*[[Bidirectional communication between two serial devices over TCP/IP]]}}}}
 
==Email==
 
* [[Sending emails via command line]]
 
==Camera=={{#ifeq: {{{eth}}} | 1 |* [[Camera access from VPN RUTOS]]<br>
* [[Hikvision: remote camera access|Remote camera access]]}}
* [[Camera access from smartphone]]
 
==PC==
 
=== Windows ===
 
* [[Setting up a Static IP address on a Windows 10 PC|Static IP address setup (Windows 10)]]
* [[OpenVPN client on Windows]]
* [[OpenVPN server on Windows]]
* [[How to generate TLS certificates (Windows)?|TLS certificates (Windows)]]{{#ifeq: {{{eth}}} | 1 |* [[Wake on LAN PC setup (Windows)]]|<br>}}
=== Linux ===
 
* [[Setting up a Static IP address on a Ubuntu 16.04 PC|Static IP address setup (Ubuntu 16)]]
* [[Setting up an FTP server on a Ubuntu 16.04 PC|FTP server (Ubuntu 16)]]
* [[OpenVPN client on Linux]]
* [[How to generate TLS certificates (Ubuntu 18)?|TLS certificates (Ubuntu 18)]]
 
===macOS===
* [[Setting_up_a_Static_IP_address_on_a_macOS|Setting up a Static IP address on macOS]]
 
==SNMP==
 
* [[SNMP configuration example]]
 
==Use cases==


===VPN===
<ul>
    <li>[[How to set up a USB printer (Windows) RUTOS | How to set up a USB printer (Windows)]]</li>
</ul>
|}}
{{#ifeq: {{{rs}}} | 1 |
===RS232/RS485===


* [[Connecting two same subnet office networks using OpenVPN bridge (TAP)]]
<ul>
* [[Connecting to the office network remotely from your home via VPN (L2TP over IPsec)]]
    <li>[[Data transfer from Modbus TCP to Modbus RTU Gateway]]</li>
* [[Connecting to the office network remotely from your home via VPN (OpenVPN)]]
    <li>[[Modbus RTU Master MQTT Serial Gateway]]</li>
* [[Configuring clients to access internet through office's gateway from home using VPN]]
    <li>[[BACnet configuration example]]</li>
* [[Reaching your home network remotely with your Android device]]
    <li>[[Bidirectional communication between two serial devices over TCP/IP]]</li>
* [[Bridged office network with a separate Guest WiFi]]
    <li>[[Connect Serial Devices as Virtual COM Ports using TRB145 and HW VSP3]]</li>
* [[Anonymous browsing from your home network using NordVPN]]
    <li>[[Reaching Cisco router console port remotely RutOS|Reaching Cisco router console port remotely]]</li>
* [[Anonymous browsing from your home network using ExpressVPN]]
    <li>[[Serial OverIP communication between Server and Client]]</li>
* [[L2TPv3 over IPsec configuration example]]{{#ifeq: {{{di}}} | 1 | <br>
</ul>
===I/O Juggler===
|}}
{{#ifeq: {{{sim}}} | 1 |
===Mobile===


* [[SMS and Email alerts Triggered by BAT120]]}}{{#ifeq: {{{wifi}}} | 1 |<br>
<ul>
===WiFi===
    <li>[[AT Commands]]</li>
 
    <li>[[Locking Devices to a Mobile Cell]]</li>
* [[How to set up a guest WiFi network]]</li>
    <li>[[RUTOS_gsmctl_Commands | GSMCTL commands]]</li>
* [[WiFi roaming setup for home/small office|WiFi roaming setup for home/small office]]</li>
    <li>[[Multi-APN]]</li>
* [[RUTOS relay / Wi-Fi extender / repeater / bridge configuration]]</li>
    <li>[[ESIM_Configuration_example|eSIM configuration example]]</li>
* [[ironwifi.com Hotspot Configuration on RutOS firmware|ironwifi.com (RutOS firmware)]]</li>
    <li>[[SMS_Forwarding_Configuration_Example|SMS forwarding configuration example]]</li>
* [[cobot.me Hotspot Configuration on RutOS firmware|cobot.me (RutOS firmware)]]</li>}}
</ul>
 
|}}
===DHCP===
{{#ifeq: {{{di}}} | 1 |<br>
 
* [[DHCP Relay configuration example]]
* [[DHCP_RELAY_over_L2TPv3|DHCP Relay over L2TPv3 example]]{{#ifeq: {{{di|bt}}} | 1 |<br>
===Hardware application===
===Hardware application===
{{#ifeq: {{{di}}} | 1 |* [[Ignition detection solution]]}}{{#ifeq: {{{bt}}} | 1 |* [[Teltonika EYE device pairing and data sender configuration example | Teltonika EYE device pairing and data sender]]|<br>}}}}
<ul>
 
{{#ifeq: {{{di}}} | 1 | <li>[[Ignition detection solution]]</li> <li>[[SMS and Email alerts Triggered by BAT120]]</li>}}
==Third party services==
{{#ifeq: {{{bt}}} | 1 | <li>[[Teltonika EYE device pairing and data sender configuration example | Teltonika EYE device pairing and data sender]]</li>
 
<li>[[How to use UBUS commands for Bluetooth device scanning / pairing]]</li>|}}
===IoT platforms===
</ul>
 
|}}
* [[Azure IoT Hub cloud connection RUTOS | Azure IoT Hub cloud connection]]
{{#ifeq: {{{mbus}}} | 1 |
* [[Cumulocity Configuration | Cumulocity]]
===M-Bus===
* [[Da³vid configuration example|da³vid]]
<ul>
* [[AWS MQTT cloud connection|AWS MQTT cloud connection]]
    <li>[[Example_of_sending_M-Bus_data_to_a_server|Sending M-bus data to a Node-red server configuration example]]</li>
* [[BAG·Tower|BAG·Tower]]{{#ifeq: {{{wifi}}} | 1 |<br>
    <li>[[M-bus:_Collecting_and_sending_M-Bus_data_to_server|Sending M-bus data to a HTTP/MQTT server configuration example]]</li>
===WiFi===
</ul>
 
|}}
* [[IdBlender Secure WiFi Setup - RUT Routers|IdBlender Secure WiFi Setup]]
* [[Ironwifi.com Hotspot Configuration on RutOS firmware|ironwifi.com]]
* [[purple.ai Hotspot Configuration|purple.ai]]
* [[UCI-based RelayD configuration with IPv4+IPv6 functionality]]
* [[Guglielmo LUMEN® AAA WiFi Setup|Guglielmo LUMEN® AAA WiFi Setup]]}}
 
===VPN===
 
* [[ZeroTier Configuration|ZeroTier]]

Latest revision as of 11:50, 5 November 2024

This page contains various configuration guides for the {{{name}}} router. Unlike the articles in the [[{{{name}}} Manual]], which provide more general knowledge on all of the router's features and functions, these guides are more in-depth and are usually focused on specific configuration scenarios with extensive explanations. While most of the guides apply to both Windows and Linux Operating Systems, some are exclusive to one OS and others aren't OS-specific in any way and apply to any system.







Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Configuration_examples_RUTOS&oldid=135654"