Template:Rms manual management commands reboot: Difference between revisions

Latest revision as of 15:41, 2 December 2022

Reboot

To Reboot device(s) selected from your device table go to the RMS web page, Left sidebar panel, (Management → Devices) and click on Devices submenu.

Move your mouse pointer to the Top control Actions menu and select Reboot (Actions → Reboot).

The Reboot function is used to reboot devices selected from your device table.

Instructions

Select the device(s) that you wish to reboot.
Move your mouse pointer to the Actions menu and click Reboot.
You will get a pop-up asking whether you really want to reboot the selected device(s). If you're ready to proceed, click Yes.
The next pop-up box will display the status of each device.

If the reboot is successful in the Status column you will you will get a message:✔ Successfully Rebooted device.

Important!

Your device(s) will be unreachable for a few minutes and shown as (Offline) in RMS.
When the ⬤ red circle (Offline) will change to ⬤ green circle (Online) the device(s) have been rebooted and now are fully operational.

@@ Line 1: / Line 1: @@
+==Reboot==
+To '''Reboot''' device(s) selected from your device table go to the RMS web page, Left sidebar panel, (<b>Management → Devices</b>) and click on <b>Devices</b> submenu.
+Move your mouse pointer to the Top control '''Actions''' menu and select '''Reboot''' (Actions → Reboot).
 The '''Reboot''' function is used to reboot devices selected from your device table.
-----
-* First select the device(s) that you wish to reboot:
-[[File:How to reboot device from rms part 1 v1.png]]
-----
-* Scroll your mouse pointer to the Commands submenu ('''Management → Commands''') and click "Reboot":
-[[File:How to reboot device from rms part 2 v2.png]]
+<br>
+===Instructions===
 ----
-* You will be prompted by a pop-up asking whether you really want to reboot the selected device(s). If you're ready to proceed, click "Yes":
+# Select the device(s) that you wish to reboot.
+# Move your mouse pointer to the Actions menu and click '''Reboot'''.
+# You will get a pop-up asking whether you really want to reboot the selected device(s). If you're ready to proceed, click '''Yes'''.
+# The next pop-up box will display the status of each device.
-[[File:How to reboot device from rms part 3 v1.png]]
+If the reboot is successful in the Status column you will you will get a message:'''<span style="color:#6CAF8F">✔</span> Successfully Rebooted device.'''
-----
-* The next pop-up box will display the status of each device. If the reboot request was successful, a green check mark with the words "This router won't be reachable for few minutes" will appear under the "Event" field for each device. At this point you can close the pop-up box:
-[[File:How to reboot device from rms part 4 v1.png]]
+'''<span style="color:#0455a4"><big>Important!</big></span>'''
-'''NOTE''': your devices will be unreachable for a few minutes and shown as "Offline" in RMS.
+* Your device(s) will be unreachable for a few minutes and shown as ('''Offline''') in RMS.
+* When the <span style="color:#BC5265">⬤</span> red circle ('''Offline''') will change to <span style="color:#6CAF8F">⬤</span> green circle ('''Online''') the device(s) have been rebooted and now are fully operational.