RUT300 Ports: Difference between revisions
Created page with "{{Template: Networking_rutos_manual_ports <!---------DEVICE DETAILS---------> | name = RUT300 | series = RUT30X <!-----------SEPARATORS-----------> | portsnumber = 5 <!--pre..." |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Template: | {{Template: Networking_rutos_manual_ports_rut3xx_trb2 | ||
<!---------DEVICE DETAILS---------> | <!---------DEVICE DETAILS---------> | ||
| name = RUT300 | | name = RUT300 | ||
Latest revision as of 13:49, 28 April 2025
Main Page > EOL Products > RUT300 > RUT300 Manual > RUT300 WebUI > RUT300 Network section > RUT300 PortsThe information in this page is updated in accordance with firmware version RUT30X_R_00.07.14.4.
Summary
The Ports page provides information related to the status of the device's physical ports, as well as the ability to edit port settings.
Port Mirroring
Port Mirroring (may also be referred to as SPAN (Switched Port Analyzer)) is a service that relays a copy of all network packets - incoming and outgoing on one Ethernet port (Source Port) to another (Monitoring Port).
| Field | Value | Description |
|---|---|---|
| Monitoring port | Disabled | LAN1 | LAN2 | LAN3 | LAN4; default: Disabled | The port which will mirror the packets. |
| Source port | Disabled | LAN1 | LAN2 | LAN3 | LAN4; default: none | Port whose packets will be mirrored. |
| Enable mirroring of incoming packets | off | on; default: off | |
| Enable mirroring of outgoing packets | off | on; default: off |