Template:Networking rutos manual auto reboot: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
m (Text replacement - "Template: Networking_rutos_manual_latest_fw" to "Template: Networking_device_manual_latest_fw")
No edit summary
 
(3 intermediate revisions by 2 users not shown)
Line 17: Line 17:
This chapter is an overview of the Auto Reboot section of {{{name}}} devices.
This chapter is an overview of the Auto Reboot section of {{{name}}} devices.


{{#ifeq: {{{series}}} | TAP100 ||{{Template: Networking_rutos_manual_basic_advanced_webui_disclaimer
{{#switch: {{{series}}} | TAP100 | TAP200 =| #default = {{Template: Networking_rutos_manual_basic_advanced_webui_disclaimer
| series = {{{series}}}
| series = {{{series}}}
}}}}
}}}}
Line 27: Line 27:
The Ping/Wget Reboot section contains one pre-configured rule by default:
The Ping/Wget Reboot section contains one pre-configured rule by default:


[[File:Networking_rutos_manual_auto_reboot_ping_wget_reboot_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_auto_reboot_ping_wget_reboot_settings_v1.png|border|class=tlt-border]]


To enable the default rule, use the off/on slider next to it. You can add more rules with the 'Add' button or delete them using the 'Delete' button. If you wish to customize a rule, click the button that looks like a pencil next to it.
To enable the default rule, use the off/on slider next to it. You can add more rules with the 'Add' button or delete them using the 'Delete' button. The maximum limit of instances is 30. If you wish to customize a rule, click the button that looks like a pencil next to it.


[[File:Networking_rutos_manual_auto_reboot_ping_wget_reboot_settings_configuration_mobile_{{{mobile}}}_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_auto_reboot_ping_wget_reboot_settings_configuration_mobile_{{{mobile}}}_v3.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 43: Line 43:
         <td>off {{!}} on; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Turns the rule on or off.</td>
         <td>Turns the rule on or off.</td>
     </tr>
     </tr>{{#ifeq:{{{mobile}}}|1|
    <tr>
        <td>No action on data limit</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>Stop actions when mobile data limit is reached.</td>
    </tr>|}}
     <tr>
     <tr>
         <td>Type</td>
         <td>Type</td>
         <td>Ping {{!}} Wget; default: <b>Ping</b></td>
         <td><span style="color:orange">Ping</span> {{!}} <span style="color:blue">Wget</span>{{#switch:{{{name}}}|OTD140= <span style="color: #olive;">Port</span>|#default=}}; default: <b>Ping</b></td>
         <td>Method used for health checking.
         <td>Method used for health checking.
             <ul>
             <ul>
                 <li><b>Ping</b> - sends ICMP requests to the specified host.</li>
                 <li><b>Ping</b> - sends ICMP requests to the specified host.</li>
                 <li><b>Wget</b> - retrieves the contents of the specified web server.</li>
                 <li><b>Wget</b> - retrieves the contents of the specified web server.</li>{{#switch:{{{name}}}|OTD140=
                <li><b>Port</b> - sends pings, if ping doesn't go through a certain amount of times, the port to which the device that has the IP address is connected to, will be restarted.</li>|#default=}}
             </ul>
             </ul>
         </td>
         </td>
Line 90: Line 96:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Packet size</td>
         <td><span style="color:orange">Packet size</span></td>
         <td>integer [0..1000]; default: <b>56</b></td>
         <td>integer [0..1000]; default: <b>56</b></td>
         <td>ICMP packet size in bytes.</td>
         <td>ICMP packet size in bytes.</td>
     </tr>{{#ifeq:{{{mobile}}} | 1 |
     </tr>{{#ifeq:{{{mobile}}} | 1 |
     <tr>
     <tr>
         <td>Interface</td>
         <td><span style="color:orange">Interface</span></td>
         <td>Automatically selected {{!}} <span style="color:red">Ping from mobile</span>; default: <b>Automatically selected</b></td>
         <td>Automatically selected {{!}} <span style="color:red">Ping from mobile</span>; default: <b>Automatically selected</b></td>
         <td>Specifies through which interface the pings will be sent. If <b>Automatically selected</b> is set, the pings will go through the main WAN interface.</td>
         <td>Specifies through which interface the pings will be sent. If <b>Automatically selected</b> is set, the pings will go through the main WAN interface.</td>
     </tr>|}}
     </tr>|}}
     <tr>
     <tr>
         <td>IP type</td>
         <td><span style="color:orange">IP type</span></td>
         <td>IPv4 {{!}} IPv6; default: <b>IPv4</b></td>
         <td>IPv4 {{!}} IPv6; default: <b>IPv4</b></td>
         <td>IP address version of the host to ping.</td>
         <td>IP address version of the host to ping.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Host to ping</td>
         <td>Action condition</td>
        <td>When all requests fail {{!}} When any request fails; default: <b>When all requests fail</b></td>
        <td>Select when the action will be executed.</td>
    </tr>
    <tr>
        <td><span style="color:orange">Host to ping</span></td>
         <td>host {{!}} ip; default: <b>8.8.8.8</b></td>
         <td>host {{!}} ip; default: <b>8.8.8.8</b></td>
         <td>Hostname or IP address to which the Ping/Wget requests will be sent.</td>
         <td>Hostname or IP address to which the Ping/Wget requests will be sent.</td>
Line 118: Line 129:
         <td>ip; default: <b>8.8.8.8</b></td>
         <td>ip; default: <b>8.8.8.8</b></td>
         <td>IP address to which the Ping requests will be sent on SIM 2.</td>
         <td>IP address to which the Ping requests will be sent on SIM 2.</td>
     </tr>|}}
     </tr>|}}{{#switch:{{{name}}}|OTD140=
    <tr>
        <td><span style="color:olive">Ping by</span></td>
        <td><span style="color:green">Port</span> {{!}} IP; default: <b>8.8.8.8</b></td>
        <td>Ping IP's by Port or by IP.</td>
    </tr>
    <tr>
        <td><span style="color:green">Port to ping</span></td>
        <td>port number and number of devices (unsigned integer); default: <b>Port1:1</b></td>
        <td>Port number and number of devices addresses to be pinged. (Number of devices connected must be less or equal to the actual number of connected devices to the port).</td>
    </tr>|#default=}}
    <tr>
        <td><span style="color:blue">URL</span></td>
        <td>url address; default: <b>none</b></td>
        <td>URL to which the wget requests will be sent (e.g., http://www.host.com).</td>
    </tr>
</table>
</table>


Line 125: Line 151:
The <b>Reboot Scheduler</b> is a function that reboots the device at a specified time interval regardless of other circumstances.  It can be used as a prophylactic measure, for example, to reboot the device once at the end of every day.
The <b>Reboot Scheduler</b> is a function that reboots the device at a specified time interval regardless of other circumstances.  It can be used as a prophylactic measure, for example, to reboot the device once at the end of every day.


You can add more rules with the 'Add' button or delete them using the 'Delete' button. If you wish to customize a rule, click the button that looks like a pencil next to it.  
You can add more rules with the 'Add' button or delete them using the 'Delete' button. The maximum limit of instances is 30. If you wish to customize a rule, click the button that looks like a pencil next to it.  


[[File:Networking_rutos_manual_auto_reboot_reboot_scheduler.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_auto_reboot_reboot_scheduler.png|border|class=tlt-border]]

Latest revision as of 11:59, 3 October 2024


Summary

Various automatic device reboot scenarios can be configured in the Auto Reboot section. Automatic reboots can be used as a prophylactic or precautionary measure that ensures the device will self-correct some unexpected issues, especially related to connection downtime.

This chapter is an overview of the Auto Reboot section of {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Ping/Wget Reboot

The Ping/Wget Reboot functions periodically send ICMP or Wget requests to a specified IP address or host and waits for a response. If no response is received, the device will attempt the same action a defined number of times at a defined frequency. If there is still no response, the device will execute the specified action (reboot, by default).

The Ping/Wget Reboot section contains one pre-configured rule by default:

To enable the default rule, use the off/on slider next to it. You can add more rules with the 'Add' button or delete them using the 'Delete' button. The maximum limit of instances is 30. If you wish to customize a rule, click the button that looks like a pencil next to it.

[[File:Networking_rutos_manual_auto_reboot_ping_wget_reboot_settings_configuration_mobile_{{{mobile}}}_v3.png|border|class=tlt-border]]

Field Value Description
Enable off | on; default: off Turns the rule on or off.
Type Ping | Wget; default: Ping Method used for health checking.
  • Ping - sends ICMP requests to the specified host.
  • Wget - retrieves the contents of the specified web server.
Action if no echo is received Device reboot | None; default: Device reboot Action that will be executed if there is no response after the specified amount of retries. If None is selected, only a message to syslog will be logged.
Interval 5 mins | 15 mins | 30 mins | 1 hour | 2 hours; default: 5 mins The frequency at which ping/Wget requests are sent to the specified host.
Interval count integer [1..9999]; default: 2 Indicates how many additional times the device will try sending requests if the initial one fails.
Timeout (sec) integer [1..9999]; default: 5 Maximum response time. If no echo is received after the amount of time specified in this field has passed, the ping/wget request is considered to have failed.
Packet size integer [0..1000]; default: 56 ICMP packet size in bytes.
IP type IPv4 | IPv6; default: IPv4 IP address version of the host to ping.
Action condition When all requests fail | When any request fails; default: When all requests fail Select when the action will be executed.
Host to ping host | ip; default: 8.8.8.8 Hostname or IP address to which the Ping/Wget requests will be sent.
URL url address; default: none URL to which the wget requests will be sent (e.g., http://www.host.com).

Reboot Scheduler

The Reboot Scheduler is a function that reboots the device at a specified time interval regardless of other circumstances. It can be used as a prophylactic measure, for example, to reboot the device once at the end of every day.

You can add more rules with the 'Add' button or delete them using the 'Delete' button. The maximum limit of instances is 30. If you wish to customize a rule, click the button that looks like a pencil next to it.

The figure below is an example of the Periodic Reboot configuration page and the table below provides information on the fields contained in that page:

Field Value Description
Enable off | on; default: off Turns the rule on or off.
Action Device reboot ; default: Device reboot Action that will be executed at the specified time.
Interval type Week days | Month days; default: Week days Scheduler instance interval type.
Week days Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday; default: Monday Week day(s) when actions will be executed. This field becomes visible when Interval type is set to Week days.
Month day integer [1..31]; default: 1 Day of the month on which the reboot will occur. This field becomes visible when Interval type is set to Month days.
Month month(s) [january..december]; default: none The month(s) on which the reboot will occur. Leave empty to apply to all months. This field becomes visible when Interval type is set to Month days.
Day time time [00:00..23:59]; default: none Exact time of day the reboot will take place
Force last day off | on; default: off Forces intervals to accept last day of month as a valid option if selected day doesn't exist in the ongoing month. This field becomes visible when Interval type is set to Month days.
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_auto_reboot&oldid=133561"