Template:Networking rutos manual setup wizard: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(6 intermediate revisions by the same user not shown)
Line 39: Line 39:
</ul>
</ul>


[[File:Networking_rutos_manual_setup_wizard_set_new_password.png]]
[[File:Networking_rutos_manual_setup_wizard_set_new_password_v2.png]]


After you have entered the new password, click 'Submit'. Afterwards you will be redirected to the first page of the Setup Wizard.
After you have entered the new password, click 'Submit'. Afterwards you will be redirected to the first page of the Setup Wizard.
Line 47: Line 47:
The <b>General</b> section is used to configure the device's time, language and WebUI mode settings.
The <b>General</b> section is used to configure the device's time, language and WebUI mode settings.


[[File:Networking_rutos_manual_setup_wizard_general_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_setup_wizard_general_v4.png|border|class=tlt-border]]


If you wish to set the device's time zone settings later instead, you can do so via the <i>Administartion → [[{{{name}}}_Administration#NTP|NTP]]</i> page.
If you wish to set the device's time zone settings later instead, you can do so via the <i>Administration → [[{{{name}}}_Administration#NTP|NTP]]</i> page.


{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
Line 59: Line 59:
The <b>LAN</b> section is used to configure the device's local area network (LAN) and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can automatically configure the TCP/IP settings for any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the device's private network.
The <b>LAN</b> section is used to configure the device's local area network (LAN) and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can automatically configure the TCP/IP settings for any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the device's private network.


[[File:Networking_rutos_manual_setup_wizard_lan_{{{lan}}}_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_setup_wizard_lan_{{{lan}}}_v3.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 68: Line 68:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>IP address</td>
         <td>IPv4 address</td>
         <td>ip; default: <b>192.168.{{{lan}}}.1</b></td>
         <td>ip; default: <b>192.168.{{{lan}}}.1</b></td>
         <td>The LAN interface's IPv4 address. An IP address identifies a device on a network and allows it to communicate with other devices.</td>
         <td>The LAN interface's IPv4 address. An IP address identifies a device on a network and allows it to communicate with other devices.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Netmask</td>
         <td>IPv4 netmask</td>
         <td>netmask; default: <b>255.255.255.0</b></td>
         <td>netmask; default: <b>255.255.255.0</b></td>
         <td>A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.</td>
         <td>A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enable DHCP</td>
         <td>Enable DHCPv4</td>
         <td>off | on; default: <b>on</b></td>
         <td>off {{!}} on; default: <b>on</b></td>
         <td>Turns the DHCP server on or off.</td>
         <td>Turns the DHCPv4 server on or off.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Start IP</td>
         <td>Enable DHCPv6</td>
         <td>integer [1..255]; default: <b>100</b></td>
         <td>off {{!}} on; default: <b>on</b></td>
         <td>The DHCP server's IP address range start value.</td>
         <td>Turns the DHCPv6 server on or off.</td>
    </tr>
    <tr>
        <td>End IP</td>
        <td>integer [1..255]; default: <b>150</b></td>
        <td>End IP, i.e., the last possible IP in the selected range for the DHCP server.</td>
    </tr>
    <tr>
        <td>Lease time</td>
        <td>integer [2..999999]; default: <b>12</b></td>
        <td>A DHCP lease will expire after the amount of time specified in this field and the device that was using the lease will have to request a new one. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes (e.g., if lease time is 12 hours, then every 6 hours the device will ask the DHCP server to renew its lease).<br>The minimal amount of time that can be specified is 2 minutes.</td>
    </tr>
    <tr>
        <td>Units</td>
        <td>Hours | Minutes; default: <b>Hours</b></td>
        <td>Lease time measuring units.</td>
     </tr>
     </tr>
</table>
</table>


If you wish to set the device's LAN and DHCP settings later instead, you can do so via the <i>Network → [[{{{name}}} LAN|LAN]]</i> page.
If you wish to set the device's LAN and DHCP settings later instead, you can do so via the <i>Network → [[{{{name}}}_DHCP]]</i> page.
{{#ifeq: {{{mobile}}} | 1 |  
{{#ifeq: {{{mobile}}} | 1 |  
==Mobile==
==Mobile==
Line 110: Line 95:
The <b>Mobile</b> section is used to configure the device's SIM card parameters.
The <b>Mobile</b> section is used to configure the device's SIM card parameters.


[[File:Networking_rutos_manual_setup_wizard_mobile.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_setup_wizard_mobile_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 117: Line 102:
         <th>Value</th>
         <th>Value</th>
         <th>Description</th>
         <th>Description</th>
    </tr>
    <tr>
        <td>Status</td>
        <td>-(interactive icons)</td>
        <td>Shows mobile connection status.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 135: Line 125:
     <tr>
     <tr>
         <td><span style="color:chocolate">Custom:</span> Authentication Type</td>
         <td><span style="color:chocolate">Custom:</span> Authentication Type</td>
         <td>None {{!}} PAP/CHAP (both) {{!}} PAP {{!}} CHAP; default: <b>None</b></td>
         <td>None {{!}} <span style="color:red">PAP</span> {{!}} <span style="color:red">CHAP</span>; default: <b>None</b></td>
         <td>The method that your carrier uses to authenticate new connections on its network. If you select PAP, CHAP or
         <td>The method that your carrier uses to authenticate new connections on its network. If you select PAP, CHAP or
             both you will be required to enter a username and password.</td>
             both you will be required to enter a username and password.</td>
    </tr>
    <tr>
        <td><span style="color:red">Username</span></td>
        <td>string; default: <b>none</b></td>
        <td>Your username that you would use to connect to your GSM carrier's network.</td>
    </tr>
    <tr>
        <td><span style="color:red">Password</span></td>
        <td>string; default: <b>none</b></td>
        <td>Your password that you would use to connect to your GSM carrier's network.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 154: Line 154:
The <b>WiFi</b> section is used to configure the device's WiFi Access Point{{#ifeq:{{{wifi}}}|5|s|}} (AP{{#ifeq:{{{wifi}}}|5|s|}}). {{#ifeq:{{{wifi}}}|5|The {{{name}}} supports two types of WiFi: 2.4 GHz and 5 GHz. 2.4 GHz WiFi provides better coverage and works at a longer range, but has lower data transfer speeds when compared to 5 GHz WiFi.|}}
The <b>WiFi</b> section is used to configure the device's WiFi Access Point{{#ifeq:{{{wifi}}}|5|s|}} (AP{{#ifeq:{{{wifi}}}|5|s|}}). {{#ifeq:{{{wifi}}}|5|The {{{name}}} supports two types of WiFi: 2.4 GHz and 5 GHz. 2.4 GHz WiFi provides better coverage and works at a longer range, but has lower data transfer speeds when compared to 5 GHz WiFi.|}}


[[File:Networking_rutos_manual_setup_wizard_wifi_{{{wifi}}}.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_setup_wizard_wifi_{{{wifi}}}_v1.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 168: Line 168:
     </tr>
     </tr>
     <tr>
     <tr>
     <td>ESSID</td>
     <td>SSID</td>
         <td>string; default: <b>RUT_<last 4 symbols of WiFi MAC>{{#ifeq:{{{wifi}}}|5|_<frequency>|}}</b></td>
         <td>string; default: <b>RUT_<last 4 symbols of WiFi MAC>{{#ifeq:{{{wifi}}}|5|_<frequency>|}}</b></td>
         <td>An identification string (name) for the access point. It is how the access point will be seen by connecting devices.</td>
         <td>An identification string (name) for the access point. It is how the access point will be seen by connecting devices.</td>
Line 187: Line 187:
In order to add a device(s) to RMS, get yourself acquainted by watching [https://www.youtube.com/watch?v=bZeqdrAcdVU this instructional video] and register an account by [https://rms.teltonika.lt/ clicking here]. <b>Each unique device receives a free month-long RMS license</b> when added to RMS for the first time.  
In order to add a device(s) to RMS, get yourself acquainted by watching [https://www.youtube.com/watch?v=bZeqdrAcdVU this instructional video] and register an account by [https://rms.teltonika.lt/ clicking here]. <b>Each unique device receives a free month-long RMS license</b> when added to RMS for the first time.  


[[File:Networking_rutos_manual_setup_wizard_rms_{{{rms}}}_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_setup_wizard_rms_{{{rms}}}_v6.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 194: Line 194:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
        <td>Connect</td>
        <td>- (interactive button)</td>
        <td>Initiates communication with RMS.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 215: Line 220:
         <td>integer [0..65535]; default: <b>15009</b></td>
         <td>integer [0..65535]; default: <b>15009</b></td>
         <td>Port number for connecting to RMS. If you're using regular RMS, just leave the default port (<i>15009</i>).</td>
         <td>Port number for connecting to RMS. If you're using regular RMS, just leave the default port (<i>15009</i>).</td>
    </tr>
    <tr>
        <td>Authentication code</td>
        <td>string; default: <b>none</b></td>
        <td>Authentication code provided by RMS after adding the device.</td>
    </tr>
    <tr>
        <td>Enable proxy</td>
        <td>off {{!}} on; default: <b>off</b></td>
        <td>Enable RMS connection through proxy.</td>
     </tr>
     </tr>
</table>
</table>

Latest revision as of 08:52, 26 November 2024

The information in this page is updated in accordance with firmware version .


Summary

The Setup Wizard is a tool that offers a simplified version of other WebUI pages used to set some of the most relevant device parameters:

  • [[{{{name}}} Administration#NTP|Time]]
  • [[{{{name}}} LAN|LAN]]
  • [[{{{name}}} WAN|WAN]]
  • [[{{{name}}} Wireless|WiFi]]
  • [[{{{name}}}_Cloud_Solutions#RMS|RMS]]

You will be greeted with the Setup Wizard the first time you login, after you have changed the device default password. On other logins you will be redirected to the [[{{{name}}} Overview|Overview]] page, but you can reach the Setup Wizard any time via the System → Setup Wizard page.

This page is an overview of the Setup Wizard tool for {{{name}}} devices.

Set new password

On your very first login you will be required to change the device default password. This is done for safety reasons. In many cases devices are used to provide access to remote networks and systems. Since many manufacturers use similar default passwords (like admin, admin01, admin123, etc.) it is easy for attackers to gain access to devices that use such passwords and compromise the systems behind them. Therefore, to avoid such malicious attacks, this step is mandatory and you will not able to access the rest of the WebUI before you change the password.

The new password must contain:

  • 8-32 characters;
  • at least one upper case letter;
  • at least one lower case letter;
  • at least one digit.

After you have entered the new password, click 'Submit'. Afterwards you will be redirected to the first page of the Setup Wizard.

General

The General section is used to configure the device's time, language and WebUI mode settings.

If you wish to set the device's time zone settings later instead, you can do so via the Administration → [[{{{name}}}_Administration#NTP|NTP]] page.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

LAN

The LAN section is used to configure the device's local area network (LAN) and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can automatically configure the TCP/IP settings for any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the device's private network.

[[File:Networking_rutos_manual_setup_wizard_lan_{{{lan}}}_v3.png|border|class=tlt-border]]

Field Value Description
IPv4 address ip; default: 192.168.{{{lan}}}.1 The LAN interface's IPv4 address. An IP address identifies a device on a network and allows it to communicate with other devices.
IPv4 netmask netmask; default: 255.255.255.0 A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.
Enable DHCPv4 off | on; default: on Turns the DHCPv4 server on or off.
Enable DHCPv6 off | on; default: on Turns the DHCPv6 server on or off.

If you wish to set the device's LAN and DHCP settings later instead, you can do so via the Network → [[{{{name}}}_DHCP]] page.


RMS

This section is used to configure the settings required to connect the device to the RMS (Remote Management System) - a cloud system designed by Teltonika and intended for remote monitoring and management of Teltonika-Networks products.

In order to add a device(s) to RMS, get yourself acquainted by watching this instructional video and register an account by clicking here. Each unique device receives a free month-long RMS license when added to RMS for the first time.

[[File:Networking_rutos_manual_setup_wizard_rms_{{{rms}}}_v6.png|border|class=tlt-border]]

Field Value Description
Connect - (interactive button) Initiates communication with RMS.
Connection type Enabled | Standby | Disabled; default: Enabled Defines how the device will connect to RMS:
  • Enabled - the device attempts to connect to RMS every 2-5 minutes (every 2 minutes the first hour; then every 5 minutes). If it cannot connect for 14 days, it will enter Standby mode.
  • Standby - the device attempts to connect to RMS every 6 hours.
  • Disabled - RMS functionality is disabled.
Hostname host | ip; default: rms.teltonika.lt Address of the RMS server. If you're using regular RMS, just leave the default address (rms.teltonika.lt).
Port integer [0..65535]; default: 15009 Port number for connecting to RMS. If you're using regular RMS, just leave the default port (15009).
Authentication code string; default: none Authentication code provided by RMS after adding the device.
Enable proxy off | on; default: off Enable RMS connection through proxy.

If you wish to set the device's RMS settings later instead, you can do so via the Services → Cloud Solutions → [[{{{name}}}_Cloud_Solutions#RMS|RMS]] page.

[[Category:{{{name}}} System section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_setup_wizard&oldid=137598"