Template:Networking rutos manual leds: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(48 intermediate revisions by 3 users not shown)
Line 2: Line 2:
__TOC__
__TOC__
==Power LED==
==Power LED==
{{#switch: {{{series}}} | OTD140 = The <b>power LED's</b> are located on the each Ethernet ports (POE In/POE Out). Green PD (Power Device) LED shines when power is supplied to device PoE In port. Green PSE (Power Sourcing Equipment) activity LED shines when PD device is connected to PoE Out port.
{{#switch: {{{series}}} | OTD140 | OTD500 = The <b>power LED's</b> are located on the each Ethernet ports (POE In/POE Out). Green PD (Power Device) LED shines when power is supplied to device '''PoE In''' port. Green PSE (Power Sourcing Equipment) activity LED shines when PD device is connected to '''PoE Out''' port.
| #default = The <b>power LED</b> is located on the bottom left corner of the front panel, just under the power connector.}}
| #default = The <b>power LED</b> is located on the bottom left corner of the front panel, just under the power connector.}}


Line 8: Line 8:


It indicates whether the device is powered on or not.
It indicates whether the device is powered on or not.
{{#ifeq: {{{name}}} | OTD140 | |
{{#switch: {{{name}}} | OTD140 | OTD500 = | #default =
<table class="nd-othertables_3">
<table class="nd-othertables_3">
     <tr>
     <tr>
Line 116: Line 116:


{{#switch: {{{eth_leds}}}  
{{#switch: {{{eth_leds}}}  
  | 1 =The <b>Ethernet port LEDs</b> are located on the device's front panel, under each respective Ethernet port.
  | 1 = The <b>Ethernet port LEDs</b> are located on the device's front panel, under each respective Ethernet port.


[[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png|500px]]
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png|500px]]
Line 142: Line 142:
     </tr>-->
     </tr>-->
</table>
</table>
  | 2=There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>.
  | 2 = There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>.


[[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png|500px]]
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png|500px]]
Line 166: Line 166:
     <tr>
     <tr>
         <td>{{#switch: {{{series}}} | #default = LED off | OTD140 =  Yellow LED off}}</td>
         <td>{{#switch: {{{series}}} | #default = LED off | OTD140 =  Yellow LED off}}</td>
         <td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)).</td>
         <td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card).</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 182: Line 182:
     <tr>
     <tr>
         <td>Green LED blinking</td>
         <td>Green LED blinking</td>
         <td>Power supply being disrupted or not stable.</td>
         <td>Power supply/device being disrupted or not stable.</td>
     </tr>}}
     </tr>}}
</table>
</table>
Line 216: Line 216:
</table>
</table>
}}|}}{{#ifeq: {{{mobile}}} | 1 | <h2>Mobile network type LEDs</h2>
}}|}}{{#ifeq: {{{mobile}}} | 1 | <h2>Mobile network type LEDs</h2>
{{#switch: {{{series}}} | TRB2M =  
{{#switch: {{{name}}} | TRB256 =  
The <b>mobile network type LEDs</b> are located on left side of the back panel:
The <b>mobile network type LEDs</b> are located on left side of the back panel:


Line 229: Line 229:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>4G, NB and M1 LEDs are blinking at the same time</td>
         <td>2G, NB and M1 LEDs are blinking at the same time</td>
         <td>No SIM or bad PIN</td>
         <td>No SIM or bad PIN</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>4G, NB and M1 LEDs light up and down in sequence</td>
         <td>2G, NB and M1 LEDs light up and down in sequence</td>
         <td>Searching mobile network operator</td>
         <td>Searching mobile network operator</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>4G/NB/M1 LED blinking</td>
         <td>2G/NB/M1 LED blinking</td>
         <td>Gateway connected to 2G/NB/M1, no data session established</td>
         <td>Gateway connected to 2G/NB/M1, no data session established</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>4G/NB/M1 LED turned ON</td>
         <td>2G/NB/M1 LED turned ON</td>
         <td>Gateway connected to 2G/NB/M1 with data session</td>
         <td>Gateway connected to 2G/NB/M1 with data session</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>4G/NB/M1 LED blinking</td>
         <td>2G/NB/M1 LED blinking</td>
         <td>Gateway connected to 2G/NB/M1 and data is being transferred</td>
         <td>Gateway connected to 2G/NB/M1 and data is being transferred</td>
     </tr>
     </tr>
</table>
</table>
| TRM500 =
The <b>mobile network type LED</b> is located on right side of the back panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
Indicates that the device has an Internet connection.
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>Flicker slowly (200 ms High/1800 ms Low)</td>
        <td>Network searching.</td>
    </tr>
    <tr>
        <td>Flicker slowly (1800 ms High/200 ms Low)</td>
        <td>Idle.</td>
    </tr>
    <tr>
        <td>Flicker quickly (125 ms High/125 ms Low)</td>
        <td>Data transfer is ongoing.</td>
    </tr>
    <tr>
        <td>Always ON</td>
        <td>Voice calling.</td>
    </tr>
    <tr>
        <td>Always OFF</td>
        <td>Minimum functionality mode.</td>
    </tr>
</table>
The <b>5G LED</b> is located on right side of the back panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_5G.png|500px]]
Indicates that the device is connected to a 5G network.
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>On</td>
        <td>Device is registered to a network.</td>
    </tr>
    <tr>
        <td>Off</td>
        <td>Device is not registered to a network.</td>
    </tr>
</table>
| TRM200 =
The <b>mobile network type LED</b> is located on right side of the front panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
Indicates that the device has an Internet connection.
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>Flicker slowly (100 ms High/800 ms Low)</td>
        <td>Network searching.</td>
    </tr>
    <tr>
        <td>Flicker slowly (100 ms High/1800 ms Low)</td>
        <td>Network registered.</td>
    </tr>
    <tr>
        <td>Flicker quickly (100 ms High/300 ms Low)</td>
        <td>Data transfer is ongoing.</td>
    </tr>
    <tr>
        <td>Always ON</td>
        <td>Others.</td>
    </tr>
    <tr>
        <td>Always OFF</td>
        <td>Flight mode, no service, shutdown.</td>
    </tr>
</table>
The <b>LTE LED</b> is located on right side of the front panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_lte.png|500px]]
Indicates that the device is connected to a 4G network.
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>On</td>
        <td>When the device is connected to a LTE network.</td>
    </tr>
    <tr>
        <td>Off</td>
        <td>When connected to other networks (WCDMA, EDGE).</td>
    </tr>
</table>
| #default =
{{#switch: {{{series}}} | TRB1 =
The <b>mobile network type LEDs</b> are located on right side of the back panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
They display which type of Internet connection is currently active.
| TRB2M =
The <b>mobile network type LEDs</b> are located on left side of the back panel.
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
They display which type of Internet connection is currently active.
| RUT9M =
The <b>mobile network type LED</b> is located on the bottom right corner of the front panel, near signal strength indication LEDs.
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
The LED displays the router's current connection state and network type among a few other things.
| #default =
| #default =
The <b>mobile network type LEDs</b> are located near the SIM card slot.
The <b>mobile network type LEDs</b> are located near the SIM card slot.
Line 254: Line 385:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]


They display which type of Internet connection is currently active.
They display which type of Internet connection is currently active.}}


{{#switch: {{{series}}} | RUT9M =
<table class="nd-othertables_3">
    <tr>
        <th width=500>Action</th>
        <th width=500>Description</th>
    </tr>
    <tr>
        <td><span style="color:green">Green</span> and <span style="color:red">red</span> blinking alternatively ever 500 ms </td>
        <td>No SIM or bad PIN.</td>
    </tr>
    <tr>
        <td><span style="color:green">Green</span>, <span style="color:red">red</span> and <span style="color:orange">orange</span> blinking alternatively every 500 ms</td>
        <td>Connecting to GSM.</td>
    </tr>
    <tr>
        <td><span style="color:orange">Orange</span> blinking every 1 sec</td>
        <td>Connected 4G, no data session established.</td>
    </tr>
    <tr>
        <td><span style="color:green">Green</span> blinking every 1 sec</td>
        <td>Connected 5G, no data session established.</td>
    </tr>
    <tr>
        <td><span style="color:orange">Orange</span> lit and blinking rapidly while data is being transferred </td>
        <td>Connected 4G with data session.</td>
    </tr>
    <tr>
        <td><span style="color:green">Green</span> lit and blinking rapidly while data is being transferred </td>
        <td>Connected 5G with data session.</td>
    </tr>
</table>
| #default =
<table class="nd-othertables_3">
<table class="nd-othertables_3">
     <tr>
     <tr>
Line 264: Line 427:
         <td>2G LED turned on</td>
         <td>2G LED turned on</td>
         <td>Device is connected to a 2G network.</td>
         <td>Device is connected to a 2G network.</td>
     </tr>|}}
     </tr>|}}{{#ifeq: {{{3g}}} | 0 ||
     <tr>
     <tr>
         <td>3G LED turned on</td>
         <td>3G LED turned on</td>
         <td>Device is connected to a 3G network.</td>
         <td>Device is connected to a 3G network.</td>
     </tr>
     </tr>}}
     <tr>
     <tr>
         <td>4G LED turned on</td>
         <td>4G LED turned on</td>
Line 276: Line 439:
         <td>5G LED turned on</td>
         <td>5G LED turned on</td>
         <td>Device is connected to a 5G network using 5G SA.</td>
         <td>Device is connected to a 5G network using 5G SA.</td>
     </tr>
     </tr>{{#switch: {{{name}}} | RUT271 = | #default =
     <tr>
     <tr>
         <td>4G and 5G LEDs turned on</td>
         <td>4G and 5G LEDs turned on</td>
         <td>Device is connected using 5G NSA.</td>
         <td>Device is connected using 5G NSA.</td>
     </tr>|}}{{#ifeq: {{{2g}}} | 1 |
     </tr>}}|}}{{#ifeq: {{{2g}}} | 1 |
     <tr>
     <tr>
         <td>2G blinking</td>
         <td>2G blinking</td>
         <td>Device is connected to a 2G network but hasn't received an IP address.</td>
         <td>Device is connected to a 2G network but hasn't received an IP address.</td>
     </tr>|}}
    </tr>
    <tr>
        <td>2G blinking rapidly</td>
        <td>Device is connected to a 2G network and data is being transferred.</td>
     </tr>|}}{{#ifeq: {{{3g}}} | 0 ||
     <tr>
     <tr>
         <td>3G blinking</td>
         <td>3G blinking</td>
         <td>Device is connected to a 3G network but hasn't received an IP address.</td>
         <td>Device is connected to a 3G network but hasn't received an IP address.</td>
     </tr>
     </tr>
    <tr>
        <td>3G blinking rapidly</td>
        <td>Device is connected to a 3G network and data is being transferred.</td>
    </tr>}}
     <tr>
     <tr>
         <td>4G blinking</td>
         <td>4G blinking</td>
         <td>Device is connected to a 4G network but hasn't received an IP address.</td>
         <td>Device is connected to a 4G network but hasn't received an IP address.</td>
    </tr>
    <tr>
        <td>4G blinking rapidly</td>
        <td>Device is connected to a 4G network and data is being transferred.</td>
     </tr>{{#ifeq: {{{5g}}} | 1 |
     </tr>{{#ifeq: {{{5g}}} | 1 |
     <tr>
     <tr>
         <td>5G blinking</td>
         <td>5G blinking</td>
         <td>Device is connected to a 5G network but hasn't received an IP address.</td>
         <td>Device is connected to a 5G network but hasn't received an IP address.</td>
    </tr>
    <tr>
        <td>5G blinking rapidly</td>
        <td>Device is connected to a 5G network and data is being transferred.</td>
     </tr>|}}
     </tr>|}}
     <tr>
     <tr>
Line 305: Line 484:
         <td>The device is attempting to connect to a mobile network operator.</td>
         <td>The device is attempting to connect to a mobile network operator.</td>
     </tr>
     </tr>
</table>}}
</table>}}}}
 
{{#switch: {{{name}}} | TRM500 | TRM200 = | #default =  
==Mobile signal strength indication LEDs==
<h2>Mobile signal strength indication LEDs</h2>
{{#switch: {{{series}}} | TRB2M =  
{{#switch: {{{series}}} | TRB2M =  
The <b>mobile signal strength indication LEDs</b> are located on left side of the back panel.
The <b>mobile signal strength indication LEDs</b> are located on right side of the back panel.
| TRB1 =
The <b>mobile signal strength indication LEDs</b> are located on right side of the back panel.
| RUT9M =
The <b>mobile signal strength indication LEDs</b> are located on the bottom right corner of the front panel, to the right of the connection status LED.
| #default =
| #default =
The <b>mobile signal strength indication LEDs</b> are located near the SIM card slot.}}
The <b>mobile signal strength indication LEDs</b> are located near the SIM card slot.}}
Line 317: Line 500:
The number of lit up LEDs represents a different mobile signal strength ([[RSSI]]) value in dBm.
The number of lit up LEDs represents a different mobile signal strength ([[RSSI]]) value in dBm.
{{#ifeq: {{{mobile_leds}}} | 3 |
{{#ifeq: {{{mobile_leds}}} | 3 |
<table class="nd-othertables_2">
<table class="nd-othertables_3">
     <tr>
     <tr>
         <th style="width: 500px>No. of lit up LEDs</th>
         <th style="width: 500px>No. of lit up LEDs</th>
Line 373: Line 556:
The Mobile signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. When you press and hold the reset button, if there is a User's default configuration configured on the device, you have to hold it pressed for 6 seconds (by default) to initiate a <b>User's default configuration reset</b> and 12 seconds (by default) to initiate a <b>Factory reset</b>. Otherwise, it is only necessary to hold the reset button for 6 seconds to trigger a <b>Factory reset</b>. If the button was held down longer than 20 seconds (by default) no action will be taken.  
The Mobile signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. When you press and hold the reset button, if there is a User's default configuration configured on the device, you have to hold it pressed for 6 seconds (by default) to initiate a <b>User's default configuration reset</b> and 12 seconds (by default) to initiate a <b>Factory reset</b>. Otherwise, it is only necessary to hold the reset button for 6 seconds to trigger a <b>Factory reset</b>. If the button was held down longer than 20 seconds (by default) no action will be taken.  


While holding the reset button each lit up signal strength LED indicate that a period of two seconds has passed. In case with <b>{{{name}}}</b>, when all {{#ifeq: {{{name}}} | RUTX12 | {{#expr: {{{mobile_leds}}} * 2}} | {{{mobile_leds}}}}} Mobile signal strength LEDs are lit up, they represent that {{#ifeq: {{{name}}} | RUTX12 | {{#expr: {{{mobile_leds}}} * 4}} | {{#expr: {{{mobile_leds}}} * 2}} }} (LED number multiplied by 2) seconds have passed since you pressed down on the reset button.
While holding the reset button each lit up signal strength LED indicate that a period of two seconds has passed. In case with <b>{{{name}}}</b>, when all {{#switch: {{{name}}} | RUTX12 | RUTM52 = {{#expr: {{{mobile_leds}}} * 2}} | #default = {{{mobile_leds}}}}} Mobile signal strength LEDs are lit up, they represent that {{#switch: {{{name}}} | RUTX12 | RUTM52 = {{#expr: {{{mobile_leds}}} * 4}} | #default = {{#expr: {{{mobile_leds}}} * 2}}}} (LED number multiplied by 2) seconds have passed since you pressed down on the reset button.


After releasing the button at one of the reset periods, all {{#ifeq: {{{name}}} | RUTX12 | {{#expr: {{{mobile_leds}}} * 2}} | {{{mobile_leds}}}}} LEDs will start blinking every 1 second. This signifies that the router <b>has begun the reset</b>.  
After releasing the button at one of the reset periods, all {{#switch: {{{name}}} | RUTX12 | RUTM52 = {{#expr: {{{mobile_leds}}} * 2}} | #default = {{{mobile_leds}}}}} LEDs will start blinking every 1 second. This signifies that the router <b>has begun the reset</b>.  
|}}
}}|}}


[[Category:{{{name}}} Manual]]
[[Category:{{{name}}} Manual]]

Latest revision as of 11:14, 14 November 2024

This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

[[File:Networking_{{{name}}}_manual_leds_power_led.png|500px]]

It indicates whether the device is powered on or not.

State Description
M LED turned on Device is powered over the Main power connector.
M LED turned off Device is not powered over the Main power connector.
R LED turned on Device is powered over the Reserve power connector.
R LED turned off Device is not powered over the Reserve power connector.

[[Category:{{{name}}} Manual]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_leds&oldid=136735"