RUT950 Ports: Difference between revisions
(Created page with "{{Template: Networking_rutos_manual_ports <!---------DEVICE DETAILS---------> | name = RUT950 | series = RUT9 <!-----------SEPARATORS-----------> | portsnumber = 4 <!--prepa...") |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Template: | {{Template: Networking_rutos_manual_ports_rut2_rut9 | ||
<!---------DEVICE DETAILS---------> | <!---------DEVICE DETAILS---------> | ||
| name = RUT950 | | name = RUT950 | ||
Latest revision as of 10:29, 9 April 2024
Main Page > EOL Products > RUT950 > RUT950 Manual > RUT950 WebUI > RUT950 Network section > RUT950 PortsThe information in this page is updated in accordance with firmware version RUT9_R_00.07.06.16.
Note: click here for the old style WebUI (FW version RUT9XX_R_00.06.09.5 and earlier) user manual page.
Summary
The Ports page provides information related to the status of the device's physical ports, as well as the ability to edit port settings.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
Port Mirroring
Port Mirroring (may also be referred to as SPAN (Switched Port Analyzer)) is a service that relays a copy of all network packets - incoming and outgoing on one Ethernet port (Source Port) to another (Monitoring Port).
| Field | Value | Description |
|---|---|---|
| Monitoring port | Disabled | LAN1 | LAN2 | LAN3; default: Disabled | The port which will mirror the packets. |
| Source port | LAN1 | LAN2 | LAN3; default: none | Port whose packets will be mirrored. |
| Enable mirroring of incoming packets | off | on; default: off | |
| Enable mirroring of outgoing packets | off | on; default: off |