RUTM10 Internet Status: Difference between revisions

From Teltonika Networks Wiki
m (Vainius.l moved page Draft:RUTM10 Internet Status to RUTM10 Internet Status without leaving a redirect)
m (Vainius.l moved page Draft:RUTM10 Internet Status to RUTM10 Internet Status without leaving a redirect)
 
(One intermediate revision by the same user not shown)
(No difference)

Latest revision as of 13:46, 28 May 2024

Main Page > RUTM Routers > RUTM10 > RUTM10 Manual > RUTM10 WebUI > RUTM10 Network section > RUTM10 Internet Status

The information in this page is updated in accordance with firmware version RUTM_R_00.07.11.

Summary

Internet status is a feature, also known as 'connchecker' which monitors the connectivity status of specified IPv4, IPv6, and DNS addresses. Repeatedly checks the connectivity status at specified intervals and reports changes.


If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Status

Field Value Description
IPv4 status Online | Offline | Untracked
  • Online - address is reachable.
  • Offline - address is unreachable.
  • Untracked - address not provided in the configuration or tracking is disabled.
  • IPv6 status Online | Offline | Untracked
  • Online - address is reachable.
  • Offline - address is unreachable.
  • Untracked - address not provided in the configuration or tracking is disabled.
  • DNS status Available | Unavailable | Untracked
  • Available - DNS is reachable.
  • Unavailable - DNS is unreachable.
  • Untracked - DNS not provided in the configuration or tracking is disabled.
  • Configuration

    Field Value Description
    Enable off | on; default: on Enable internet monitoring.
    Track IPv4 ipv4; default: 1.1.1.1 IPv4 address to be monitored.
    Track IPv6 ipv6; default: 2a00:1450:4001:831::200e IPv6 address to be monitored.
    Track domain domain name; default: dns.google.com Domain to be checked if alive.
    Interval seconds; default: 60 The time interval in seconds at which the connectivity status should be checked.