Template:Networking rutos manual mobile: Difference between revisions

Latest revision as of 09:46, 14 November 2024

The information in this page is updated in accordance with firmware version .

Summary

The Mobile page is used to configure mobile connection settings.

This manual page provides an overview of the Mobile page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

General

The General section is used to configure SIM card parameters that define how the device will establish a mobile connection.

SIM card settings

The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.

[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v4.png|border|class=tlt-border]]

Field	Value	Description
Deny data roaming	off \| on; default: off	Denies data connection on roaming conditions.
PIN	integer [0000..99999999]; default: none	SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in flash memory therefore it does not reset when default settings are restored.

Interface mob1s1a1 APN configuration

Field	Value	Description
Auto APN	on \| off; default: on	Auto APN scans an internal APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database ( APN database )
APN	string; default: none	An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a public IP address) depending on the contract. An APN Network Identifier cannot start with any of the following strings: rac; lac; sgsn; rnc; it cannot end in: .gprs; and it cannot contain the asterisk symbol (*).
Authentication type	None \| PAP \| CHAP; default: None	Authentication method that your carrier uses to authenticate new connections on it's network
Username	string; default: empty	Username provided by your carrier
Password	string; default: empty	Password provided by your carrier

Connection

Field	Value	Description
VoLTE	Auto \| On \| Off; default: Auto	Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.
Preferred network type
Band selection	Auto \| Manual; default: Auto	Network frequency band selection method. When set to Auto, the device connects to the band with the best connectivity conditions, while Manual provides the possibility to manually select the bands which the device will obliged to use. Selecting bands manually shows their duplex modes for 4G and 5G capable devices only.

Low signal reconnect

The Low signal reconnect section is used to configure modem operator connection resetting based on signal strength .

Field	Value	Description
Enable	off \| on; default: off	Enables Low signal reconnect.
Reset threshold	integer [-120..-50]; default: none	Signal threshold in dB for the connection. When signal is under this value modem resets connection.
Reset timeout	integer [15..65535]; default: 600	Time for the device to wait in seconds before trying to reset the connection again.

Limits

Data limit

The Data Limit section provides you with the possibility to set up a maximum used data cap for your SIM card.

[[File:Networking_rutos_manual_mobile_limits_data_limit_{{{dualsim}}}.png|border|class=tlt-border]]

To configure Data Limit press Edit

Field	Value	Description
Enable data connection limit	off \| on; default: off	Disables mobile data when the limit for the current period is reached
Data limit (MB)	integer; default: none	Disable mobile data after the limit value in MB is reached
Reset period	Day \| Week \| Month; default: Day	Interval for resetting mobile data usage limit.
Reset time	0-23 / Monday - Sunday / 0-31; default: 0	Specify the hour (in 24-hour format) when the mobile data limit reset occurs.
Enable SMS warning	on \| off; default: off	Enables sending of warning SMS message when mobile data limit is reached.
Warning threshold	integer; default: none	Send warning SMS message after threshold in MB is reached. Warning threshold cannot be higher than data limit!
Phone number	integer; default: none	A phone number to send warning SMS message to
Clear collected data	- (interactive button)	The data collected for this interface will be cleared, but only if the interface is active

SMS limit

The SMS Limit section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.

[[File:Networking_rutos_manual_mobile_limit_sms_limit_{{{dualsim}}}.png|border|class=tlt-border]]

To configure SMS Limit press Edit

Field	Value	Description
Enable SMS Limit	off \| on; default: off	Turns SMS limiting on or off.
SMS limit count	integer; default: none	Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period.
Period	Day \| Week \| Month; default: Day	Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.
Reset time	0-23 / Monday - Sunday / 0-31; default: 0	Starting hour of the day / day of the week / day of the month for SMS limiting period.
Clear SMS Limit	- (interactive button)	Clears the SMS limit counter for the selected period.

Network selection

The Network operators section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to.

[[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]

Field	Value	Description
Current operator	string; default: none	Displays the name of the operator the which the device is currently connected.
Connection mode	Auto \| Manual \| Manual-Auto; default: Auto	Operator selection method. Auto - selects the operator automatically. Manual - requires you to select the operator manually. (More on this selection below.)

Manual operator selection

To select an operator manually, specify Connection mode: Manual and click 'Scan For Operators'.

[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v2.png|border|class=tlt-border]]

Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.

Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.

Once the scan has finished, you will see the results in the 'Available operators'.

In order to lock the SIM card to using a single operator, select operator from Operator code field and click 'Save & Apply'.

Operators list

This section is used to create lists of operators codes, which can then be used in Operator settings section to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).

By clicking Edit on a list you will be redirected to editing page in which you can enter operator codes for that list.

Utilities

SIM PIN management

Field	Value	Description
SIM card lock	off \| on; default: off	Correct PIN code is required to enable or disable SIM card lock. Once SIM card lock is disabled you will not need to enter PIN code on any device to use SIM card.
Change PIN	- (interactive button)	Open modal window to change SIM PIN

PIN/PUK lock notification

If you set an invalid PIN/PUK code or insert a locked/blocked SIM card, a side message will pop up with information that the SIM card is locked or blocked. Click 'Unlock SIM here` to open the modal window where you can enter the SIM card PIN/PUK codes.

Side message where the SIM is locked

Side message where the SIM is blocked

Field	Value	Description
PIN	4-8 positive numeric chars (positive number); default: none	SIM card's PIN (Personal Identification Number) is a secret numeric password shared between a user and a system that can be used to authenticate the user. PIN is saved in flash memory, it will be saved after device reset.
PUK	8 positive numeric chars (positive number); default: none	SIM PUK (Personal Unblocking Key) is a code consisting of 8 digits. It is used to unblock your SIM card when you entered 3 times a wrong PIN code

APN Database

APN stands for Access Point Name and allows a device's network to connect to the internet. With the APN settings in place, your device builds a connection to a carrier's gateway. APN Database page section provides you with possibility to create/edit/delete APN records. Note: APN Database is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

Adding new APN

In order to create new APN to database, insert required information and click Add button.

Field	Value	Description
Carrier name	default: empty	Carrier name - name of a company that sells wireless connectivity to customers for cellphone data and telephone calls. It may also be called a mobile network operator, a mobile carrier, cellular company or wireless service provider.
Mobile Country Code	default: empty	Mobile Country Code (MCC) - a mobile code consisting of three digits used to identify GSM networks. MCC is also used along with the International Mobile Subscriber Identity (IMSI) to identify the region from which mobile subscriber belongs.
Mobile Network Code	default: empty	Mobile Network Code (MNC) - a unique two- or three-digit number used to identify a home Public Land Mobile Network (PLMN) to. MNC is allocated by the national regulator.
APN	default: empty	APN (Access Point Name) is configurable network identifier used by a mobile device when connecting to a carrier
PDP type	IPv4/IPv6 \| IPv4 \| IPv6; default: IPv4/IPv6	Specifies what type of address is requested from the operator
Authentication type	none \| PAP \| CHAP; default: none	Authentication method that your GSM carrier uses to authenticate new connections on it's network
Username	default: empty	Your username that you would use to connect to your GSM carrier's network
Password	default: empty	Your password that you would use to connect to your GSM carrier's network

[[Category:{{{name}}} Network section]]

@@ Line 108: / Line 108: @@
 |TRB245|RUT956|RUT951|RUT906|RUT901|RUT241 = [[File:Networking_rutos_manual_mobile_connection_connection_2g.png|border|class=tlt-border]]
 |TRB256 = [[File:Networking_rutos_manual_mobile_connection_connection_trb2m.png|border|class=tlt-border]]
-|RUTX50|TRB500|RUTM50|RUTC50 = [[File:Networking_rutos_manual_mobile_connection_connection_5g.png|border|class=tlt-border]]}}
+|RUTX50|TRB500|RUTM50|RUTC50|RUTM51|RUTM52 = [[File:Networking_rutos_manual_mobile_connection_connection_5g.png|border|class=tlt-border]]}}
@@ Line 122: / Line 122: @@
         	<td>Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.</td>
      </tr>}}
-     <tr>
+     <tr>{{#switch:{{{name}}}|TRB256=|#default=
        	<td>Preferred network type</td>
         	<td>{{#switch: {{{series}}}
 |RUTX|RUTM|RUTC = {{#switch: {{{name}}}
-          |RUTX50|RUTM50|RUTC50 = 5G/4G/3G auto {{!}} 5G/4G auto {{!}} 4G/3G auto {{!}} 5G only {{!}} 4G only {{!}} 3G only; default: <b>5G/4G/3G auto</b>
+          |RUTX50|RUTC50|RUTM52|RUTM54 = 5G/4G/3G auto {{!}} 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>5G/4G/3G auto</b>
+         |RUTM50|RUTM51 = 5G/4G auto {{!}} 5G only {{!}} 4G only; default: <b>5G/4G auto</b>
           |#default = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>}}
 |TRB5 = 5G/4G/3G auto {{!}} 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>5G/4G/3G auto</b>
 |RUT36X|TCR1|RUT361|TRB16 = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>
-|TRB1|RUT9|RUT9M = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
+|TRB1|RUT9|RUT9M|OTD140 = {{#switch: {{{name}}}
+         |RUT976 = 5G/4G auto {{!}} 5G only {{!}} 4G only; default: <b>5G/4G auto</b>
+         |#default = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
 |RUT2M = {{#switch: {{{name}}}
           |RUT241|RUT200 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
-          |RUT260 = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>}}
+          |RUT260 = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>
+         |RUT271 = 5G/4G auto {{!}} 5G only {{!}} 4G only; default: <b>5G/4G auto</b>}}
 |TRB2 = {{#switch: {{{name}}}
           |TRB245 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
@@ Line 142: / Line 146: @@
           |RUT230 = 3G/2G auto {{!}} 3G only {{!}} 2G only; default: <b>3G/2G auto</b>
           |RUT240 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
-}}</td>
+|RUT206 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
-       	<td>Network connection type preference.</td>
+         </td>
-    </tr>{{#switch: {{{name}}} |TRB255|TRB256=
+   </tr>}}
+{{#switch: {{{name}}}
+         |RUTX50|RUTM50|RUTC50|TRB500|RUTM51|RUTM52|RUTM54 =
+    <tr>
+         <td>5G mode</td>
+         <td>Auto {{!}} NSA {{!}} SA default: <b>Auto</b></td>
+         <td>Specifies the 5G mode being used. Auto-checks available options. NSA (Non-Standalone) can be used with existing 4G and 5G infrastructure. SA (Standalone) requires only 5G infrastructure.</td>
+     </tr>
+}}
+{{#switch: {{{name}}} |TRB255|TRB256=
      <tr>
        	<td>Network Category</td>
@@ Line 152: / Line 165: @@
      <tr>
        	<td>Band selection</td>
-        	<td>Auto | Manual; default: <b>Auto</b></td>
+        	<td>Auto {{!}} <span style="color:blue">Manual</span>; default: <b>Auto</b></td>
         	<td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use. Selecting bands manually shows their duplex modes for 4G and 5G capable devices only.</td>
+    </tr>{{#ifeq: {{{M1+NB}}}|1|
+    <tr>
+    	<td><span style="color:blue">CAT-M1 bands</span></td>
+       	<td>Band list; default: <b>empty</b></td>
+       	<td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
      </tr>
+    <tr>
+    	<td><span style="color:blue">CAT-NB bands</span></td>
+       	<td>Band list; default: <b>empty</b></td>
+       	<td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
+    </tr>|}}{{#ifeq: {{{5G}}}|1|
+    <tr>
+    	<td><span style="color:blue">5G bands</span></td>
+       	<td>Band list; default: <b>empty</b></td>
+       	<td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
+    </tr>|}}{{#ifeq: {{{4G}}}|1|
+    <tr>
+    	<td><span style="color:blue">LTE bands</span></td>
+       	<td>Band list; default: <b>empty</b></td>
+       	<td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
+    </tr>|}}{{#ifeq: {{{3G}}}|1|
+    <tr>
+    	<td><span style="color:blue">UMTS bands</span></td>
+       	<td>Band list; default: <b>empty</b></td>
+       	<td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
+    </tr>|}}{{#ifeq: {{{2G}}}|1|
+    <tr>
+    	<td><span style="color:blue">GSM bands</span></td>
+       	<td>Band list; default: <b>empty</b></td>
+       	<td>[https://teltonika-networks.com/products/routers/{{{name}}}#ordering {{{name}}} Supported Frequency Bands] that can be selected from the list.</td>
+    </tr>|}}
 </table>
+{{#ifeq: {{{name}}}|RUT200| |
 ===Low signal reconnect===
 ----
@@ Line 172: / Line 214: @@
      <tr>
        	<td>Enable</td>
-        	<td>off | on; default: <b>off</b></td>
+        	<td>off {{!}} on; default: <b>off</b></td>
         	<td>Enables Low signal reconnect.</td>
      </tr>
@@ Line 186: / Line 228: @@
      </tr>
 </table>
+}}
+{{#ifeq: {{{name}}} | TRB500 | |
 ==Limits==
@@ Line 194: / Line 238: @@
 The <b>Data Limit</b> section provides you with the possibility to set up a maximum used data cap for your SIM card.
-{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_data_limit_dualmodem.png|border|class=tlt-border]]; default: [[File:Networking_rutos_manual_mobile_limits_data_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}
+{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_data_limit_dualmodem.png|border|class=tlt-border]] |#default = [[File:Networking_rutos_manual_mobile_limits_data_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}
 To configure <b>Data Limit</b> press <b>Edit</b>
@@ Line 206: / Line 250: @@
      <tr>
        	<td>Enable data connection limit</td>
-        	<td>off | on; default: <b>off</b></td>
+        	<td>off {{!}} on; default: <b>off</b></td>
         	<td>Disables mobile data when the limit for the current period is reached</td>
      </tr>
@@ Line 216: / Line 260: @@
      <tr>
        	<td>Reset period</td>
-        	<td>Day | Week | Month; default: <b>Day</b></td>
+        	<td>Day {{!}} Week {{!}} Month; default: <b>Day</b></td>
         	<td>Interval for resetting mobile data usage limit.</td>
      </tr>
@@ Line 226: / Line 270: @@
      <tr>
        	<td>Enable SMS warning</td>
-        	<td>on | off; default: <span style="color:red"><b>off</b></span></td>
+        	<td>on {{!}} off; default: <span style="color:red"><b>off</b></span></td>
         	<td>Enables sending of warning SMS message when mobile data limit is reached.</td>
      </tr>
@@ Line 245: / Line 289: @@
      </tr>
 </table>
+}}
 ===SMS limit===
@@ Line 251: / Line 297: @@
 The <b>SMS Limit</b> section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.
-{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_sms_limit_dualmodem.png|border|class=tlt-border]]; default: [[File:Networking_rutos_manual_mobile_limit_sms_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}
+{{#switch: {{{name}}} |RUTX12|RUTM52|RUTM12 = [[File:Networking_rutos_manual_mobile_limit_sms_limit_dualmodem.png|border|class=tlt-border]] |#default = [[File:Networking_rutos_manual_mobile_limit_sms_limit_{{{dualsim}}}.png|border|class=tlt-border]]}}
 ----
@@ Line 457: / Line 503: @@
 on a list you will be redirected to editing page in which you can enter operator codes for that list.
-[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v3.png|border|class=tlt-border]]}}
+[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v3.png|border|class=tlt-border]]
 ==Utilities==
@@ Line 463: / Line 509: @@
 ===SIM PIN management===
-{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking rutos manual mobile utilities sim pin dualmodem.png|border|class=tlt-border]] | [[File:Networking rutos manual mobile utilities sim pin.png|border|class=tlt-border]]}}
+{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking rutos manual mobile utilities sim pin dualmodem.png|border|class=tlt-border]] | [[File:Networking rutos manual mobile utilities sim pin v1.png|border|class=tlt-border| 1102px]]}}
 <table class="nd-mantable">