RUT140 Firmware Downloads

---

This page contains firmware files for RUT140 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in RUT140 Firmware.

RUT140

---

File	Type	Release date	Size	MD5	Changelog
RUT14X_R_00.07.10.2_WEBUI.bin	Latest FW	2024.11.04	11.06 MB	2787a67b6ebfb9a8a8d3b819f30beeb3	Link
RUT14X_R_00.07.09.4_WEBUI.bin	Mass production FW	2024.10.02	11.06 MB	9a39bdd305e4068333aa32b4716f4609	Link

RUT14X_R_GPL_00.07.10.2.tar.gz

SDK

2024.11.04

19.27 MB

8c6fd1d0882b350e8d63614fb33d16ff

Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.

FW checksums

---

Checksums for firmware files can be found here.

Changelog

RUT14X_R_00.07.10.2 | 2024.11.04

• Fix
  • Network
    • Firewall: fixed bug in NAT rule migration script that would overwrite Port Forwarding rule options

---

RUT14X_R_00.07.10 | 2024.10.10

• New
  • Network
    • Wireless: added noise value calculation
  • Services
    • AWS IoT Core: added service
    • BACnet: added ability to configure several BIP interfaces, to set network numbers and preconfigure BDT entries for BBMD
    • Console: added service status information display
    • DLMS: added service status information display
    • DNP3 Client: added service status information display
    • DNP3 Outstation: added service status information display
    • Modbus Client: added service status information display
    • Modbus Server: added service status information display
    • Modbus TCP over Serial Gateway: added service status information display
    • MQTT Modbus Gateway: added service status information display
    • OPC UA Client: added service status information display
    • OPC UA Server: added variable "rut_wan_type" which shows if WAN is on a wired or a mobile network
    • OPC UA Server: added service status information display
    • RMS: added SOCKS5 proxy support
  • System
    • Certificates: added SCEP certificate generation method
• Improvements
  • Network
    • Curl: added unix socket support
    • Firewall: added most options to basic mode for all firewall pages
    • Firewall: added all firewall pages to basic mode
    • Interfaces: increased interface metric maximum value from 10000 to 4294967295
    • Multi WAN: added rules table to basic mode
    • Network: improved performance under stateless single-directional traffic (RFC2544)
    • Static Routes: added page to basic mode
    • VRRP: added page to basic mode
    • Wireless: added interface status message when DFS CAC is in progress
    • Wireless: added most options to basic mode
    • Wireless: added SSID creation and deletion to basic mode
  • Services
    • DLMS: added meter COSEM object scanning
    • DNP3 Client: made menu names more consistent
    • Hotspot: added "Coova-Chilli-SSID" (28) Vendor Specific Attribute for Radius
    • IPsec: improved 'Remote endpoint' validation to allow '%any', '%any4', '%any6' values and netmask
    • IPsec: added ability to use certificates from Certificate Manager
    • L2TPv3: added Tunnel ID and Session ID validation to avoid creating multiple tunnels with the same parameters
    • Modbus Client: updated Modbus Client menu position
    • Modbus Server: updated Modbus Server menu position
    • Python3: changed python3-light package libraries
    • Tinc: added options to set the tunnel's IP address
    • Tinc: added a port option to listen for incoming connections and the ability to specify a port for outgoing connections
    • Wireguard: added tunnel source mode selection
    • Kernel: updated version to 5.15.165
    • Python3: updated version to 3.11.7
    • Strongswan: updated version to 5.9.14
  • System
    • Access Control: refactored 'General', 'Security' and 'PAM' Web pages
    • Auto Reboot: added support for multiple hosts/URLs in Ping/Wget Reboot
    • Backup: encrypting backup does not require 7zip package anymore
    • Certificates: split "Let's Encrypt" certificates into multiple files
    • Troubleshoot: added dynamic routes debugging information
    • WebUI: added ability to open new page in new tab without entering user credentials
    • WebUI: improved SDK example application
    • Glib2: updated version to 2.80.5
    • Ncurses: updated version to 6.5
• Fix
  • Network
    • Firewall: fixed automatic priority option change
    • Wireless: fixed BSSID show for interface in Client mode
    • Wireless: fixed hostapd ubus call timeout after wireless configuration change
    • Wireless: fixed reporting disconnection from external AP when device in STA+AP mode
    • Wireless: fixed missing rx frame types needed for wifi scanner
  • Services
    • BACnet: fixed communication issues between the ports
    • BACnet: added all available default baud rates
    • BGP: fixed AS field to allow duplicate values
    • BGP: fixed Access list filters not applying fully
    • DLMS: added all available default baud rates
    • DMVPN: fixed DMVPN GRE instance disappearing when creating new IPsec instance
    • DNP3 Client: removed unnecessary max length display for test response field
    • DNP3 Client: renamed TCP Station to TCP Client in the API documentation
    • DNP3 Client: added all available default baud rates
    • DNP3 Outstation: added all available default baud rates
    • GRE: fixed interface not showing up in OSPF and RIP selections if it is off
    • Hotspot: fixed blocklist not working when no addresses are provided
    • Hotspot: fixed uploaded custom landing page file permissions
    • Hotspot: fixed certificates to be required to enable https redirect
    • IPsec: fixed IP rule not appearing after network restart
    • IPsec: fixed duplicate port values in IPsec firewall rules
    • Ledman: fixed issue when power LED turns off when rebooting device
    • Modbus Client: added all available default baud rates
    • Modbus Client: added missing API docs for Modbus test request
    • Modbus Server: added all available default baud rates
    • Modbus Server: fixed firewall rule staying enabled when app is disabled
    • Modbus Server: fixed firewall rule creation
    • OpenVPN: fixed the configuration after disabling the use of external services
    • SNMP: fixed Hotspot OIDs' hssID and hssUsername display
    • Tinc: fixed adding routes to remote subnets
    • Tinc: fixed configuration generation issues when creating multiple network and host instances
    • Tinc: fixed issues with route creation when using IPv6 addresses in tunnel configuration
    • Tinc: fixed validation for uploading key files
  • System
    • Backup: fixed uploading backup with memory expansion enabled
    • CLI: fixed some private IPs being incorrectly determined as public
    • JSON-RPC: fixed login "Access Denied" error
    • WebUI: added API required values validation when enabling BACnet, DLMS, DNP3, Modbus, MQTT, NTRIP services
    • WebUI: fixed 'Memory' status card progress bars visuals
    • WebUI: fixed search bar suggestions after removing packages
    • WebUI: fixed showing data in modals for users with only read permissions
    • WebUI: fixed custom SDK pages not loading correctly
• CVE Patches
  • CVE-2021-3520
  • CVE-2021-44540
  • CVE-2021-44541
  • CVE-2024-4032
  • CVE-2024-6119
  • CVE-2024-6232
  • CVE-2024-6923
  • CVE-2024-7264
  • CVE-2024-42225

---

RUT14X_R_00.07.09.4 | 2024.10.02

• Improvements
  • Services
    • NTP Client: changed default NTP servers
• Fix
  • Services
    • NTP Client: fixed NTP server usage to work with next in line server if current server does not respond

---

RUT14X_R_00.07.09.3 | 2024.09.27

• Fix
  • Network
    • Multi WAN: fixed ipsets not getting deleted correctly when Multi WAN gets restarted

---

RUT14X_R_00.07.09.1 | 2024.09.13

• Improvements
  • Services
    • Python3: updated version to 3.11.7

---

RUT14X_R_00.07.09 | 2024.09.03

• New
  • Network
    • Firewall: added ability to configure NAT rule action
    • Firewall: added additional TTL target for firewall rules
    • Realtime Traffic: added historical traffic charts
    • Realtime Traffic: added overall quality measurement to wireless signal charts
    • Wireless: added option to enable 802.11w Management frame protection when using non-WPA3 encryption
  • Services
    • Events Reporting: added new firmware version notification event
    • SNMP: added Multiwan data module
  • System
    • WebUI: added notifications menu
• Improvements
  • Network
    • Ports Settings: added more PoE state symbols, colored disabled port differently and improved port status hint
    • Realtime Traffic: improved chart styles
    • Wireless: increased EAP authentication logging
    • Wireless: added various validations for network that is being used by wireless interface
    • Wireless: added insecure configuration warnings when configuring SSIDs
    • Wireless: updated wireless cards to display each radio device's signal quality and band data
    • Wireless: reduced time required for Fast Transition in STA mode
  • Services
    • Data to Server: added warning messages about insecure certificates for http_certfile and mqtt_certfile options in API and WebUI
    • DLMS: added SHA256 authentication
    • DLMS: improved COSEM group enable validation
    • GRE: reduced GRE keepalive packet buffer size
    • Hotspot: increased throughput performance
    • Hotspot: increased maximum length of 'Local users' username to 255 characters
    • Hotspot: added walled garden allowlist and blocklist
    • IPsec: added support for route based tunnel
    • L2TP: added field for custom options
    • SMPP: added timeout option
    • Web Filter: added hostname count message after successful file upload
  • System
    • Access Control: improved system user's access control rules logic
    • Access Control: added option to disable password auth for the root user
    • Administration: improved write/read access control options display to match meniu path style
    • Backup: improved backup page by splitting it into backup and reset settings page
    • Side Widget: added port status widget
    • Update Firmware: changed firmware update log to include firmware version
    • WebUI: updated firmware and backup verification pages design
    • WebUI: improved global alerts display
    • WebUI: added confirmation prompt for disabling service in side widget
    • Kernel: updated version to 5.15.162
• Fix
  • Network
    • Devices: fixed configured VLAN 0 device cannot be selected in interface physical settings configuration
    • Network: fixed Ethernet switch port state change tracking logic
    • RelayD: fixed relayd assigning wrong interface to zone
    • Wireless: fixed station mode connection issues for 2.4 GHz radio in STA+AP mode
    • Wireless: fixed wireless status API response to contain separate interface information for multiple radio configurations
  • Services
    • Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint to create Data to Server sections
    • Azure IoT Hub: fixed the Azure IoT Hub deprecated endpoint so that it does not create sections in GET request
    • Azure IoT Hub: fixed the deletion of Data to Server sections when an Azure IoT Hub section is deleted through the deprecated endpoint
    • DLMS: fixed OBIS code validation
    • Hotspot: fixed 'Hotspot network' input validation to only allow network mask from 16 to 30
    • OPC UA Client: fixed TCL file upload
    • OPC UA Server: fixed TCL file upload
    • OPC UA Server: fixed configuration migration
    • OpenVPN: fixed default firewall zone for tap interfaces
    • SNMP: fixed TELTONIKA-MIB wireless module crash
    • SNMP: fixed mobile network state display
    • SNMP: fixed default hssDwLimit, hssUpLimit, hssDwBandwidth and hssUpBandwidth values
  • System
    • API Core: fixed file deletion
    • Boot: fixed Teltonika logo in httpd recovery page when using Firefox
    • Package Restore: fixed automatic package re-installation after firmware upgrade
    • Troubleshoot: fixed troubleshoot not including all the log files when log to flash is enabled
    • User Settings: fixed page to show groups and users if the user has been granted access
    • WebUI: fixed overview page to display active wireless (WLAN) clients
• CVE Patches
  • CVE-2021-32292
  • CVE-2022-40617
  • CVE-2023-49441
  • CVE-2024-0397
  • CVE-2024-3596
  • CVE-2024-5535
  • CVE-2024-8088
  • CVE-2024-26669
  • CVE-2024-26739
  • CVE-2024-26740
  • CVE-2024-36901

---

RUT14X_R_00.07.08.2 | 2024.08.12

• Fix
  • System
    • Update Firmware: fixed inconsistent firmware download from FOTA

---

RUT14X_R_00.07.08.1 | 2024.08.06

Note: This firmware version was removed due to an issue with FOTA firmware download.

• Improvements
  • Services
    • Zerotier: updated version to 1.14.0
• Fix
  • Network
    • Network: fixed default route not being added for PPPoE connections
  • Services
    • OPC UA Client: fixed connections not being closed after using testing functionality
  • System
    • WebUI: fixed SDK WebUI package compilation

---

RUT14X_R_00.07.08 | 2024.07.18

Note: This firmware version was removed due to an issue with FOTA firmware download.

• New
  • Network
    • DNS: added inherited server status to configuration page
    • HTTPS DNS Proxy: added new HTTPS DNS Proxy package to package manager
  • Services
    • Data to Server: added 'Lua script' data input
    • Hotspot: added Single Sign-on (OIDC) authentication mode
    • Hotspot: added Walled Garden blocklist functionality
    • IPsec: added initial XFRM support
    • MQTT Modbus Gateway: added JSON message type format
    • OpenVPN: added DCO support
  • System
    • API Core: added option to configure api session timeout
    • Certificates: added "Let's encrypt" certificate generation
    • PAM: added RADIUS external user support
    • UI Core: added data analytics support
    • Update Firmware: added warning message about device being temporarily unreachable on firmware update
• Improvements
  • Network
    • DNS: separated field "DNS forwardings" into two: one for simple server forwarding other for domain-specific
    • DNS: moved "DNS Forwardings", "Listen interfaces", "Exclude interfaces", "Local service only", options to advanced tab
    • Firewall: improved protocol field in all firewall pages by making that "All" value would be mutually exclusive with any other value
    • Multi WAN: improved interface status representation when using load balancing
    • Network: added more options for "IPv6 assignment length" field
    • VLAN: added ability to configure VLAN 0
    • Wireless: added warning when user configures mesh on radio with automatic frequency channel
    • Wireless: added support for wireless MAC-filter MAC ranges
    • Wireless: changed Radius Accounting port is not required when configuring access point with enterprise encryption
    • Wireless: refactored radio configuration page layout
    • Wireless: refactored assignment of wireless interfaces MAC addresses, STA interface will always use fixed address
  • Services
    • Azure IoT Hub: added DPS symmetric key attestation support
    • Azure IoT Hub: added Direct Method support
    • Azure IoT Hub: added Plug and Play integration
    • Azure IoT Hub: added link to "Data to Server" page
    • Data to Server: added support for multiple filters
    • Data to Server: improved HTTP output hostname definition with automatic protocol specification in URL
    • Data to Server: improved MQTT input connection handling
    • DNP3 Client: added option to enable/disable service
    • Dynamic DNS: added Lookup hostnames support
    • GRE: increased Inbound and Outbound key limit to 4294967295
    • Hotspot: adjusted hotspot user manager page to display active and inactive user sessions
    • Hotspot: changed local users to be stored with other types of users
    • Hotspot: added 'noc2c' option for enabling client isolation, option is enabled by default
    • IPsec: added certificate warning message
    • Modbus Server: added mobile last month and last week usage registers
    • Mosquitto: added large package size check for MQTT clients
    • MQTT Modbus Gateway: improved mosquitto reconnect time and service will try to recover few times before exiting
    • MQTT Publisher: improved MQTT connection handling
    • OPC UA Client: added security modes
    • OPC UA Server: added security modes
    • OPC UA Server: added service status display
    • OpenVPN: added support for decrypting private key when uploading a configuration file
    • OpenVPN: improved instance status state
    • OpenVPN: added options to specify an IP address pool for dynamic assignment to clients
    • SMPP: added brute-force prevention
    • SMPP: added TLS/SSL support
    • SNMP: changed interface module OID structure
    • SNMP: improved User-based Security Model (USM) brute force attack prevention measures
    • Stunnel: improved global instance settings dependencies
    • emailrelay: updated version to 2.4.1
    • OpenVPN: updated version to 2.6.9
    • stunnel: updated version to 5.72
  • System
    • Access Control: added certificate key length warnings
    • Access Control: adjusted access control when all pages are blocked
    • Access Control: added certificate file download for CLI to work on all browsers
    • API Core: implemented functionality to include warning messages for vulnerable certificates
    • Package Manager: added multi package actions
    • Package Manager: added status filter
    • Package Manager: moved package upload action to main page
    • Package Manager: added links to installed packages pages
    • Package Manager: refactored "Packages" page
    • Package Manager: updated opkg repository link to use https
    • RutOS: improved GPL example page to align with new software architecture
    • Troubleshoot: added support for multiple syslog servers
    • UI Core: added additional message with IP address to loading screen for scenarios when redirect to different IP address happens
    • UI Core: added toast message hiding when text is too long
    • Update Firmware: added 'Firmware version' data in screen after firmware upload
    • WebUI: added functionality to cancel loading screen if it takes 30 or more seconds
    • WebUI: removed all ubus method calls from webui
    • WebUI: improved language caching
    • WebUI: added password generator for first login modal
    • WebUI: added sticky position to side menu
    • WebUI: added default password hint to login error message
    • WebUI: added warning messages for low-security certificates
    • Kernel: updated version to 5.15.159
    • libexpat: updated version to 2.6.2
    • SSL/TLS: updated version to 3.0.14
    • vue: updated version to 3.4
• Fix
  • Network
    • Channel Analysis: fixed network list not being updated if a single scan fails
    • Devices: fixed missing API devices status endpoint permission
    • DHCP: fixed "DHCP option" allow empty input value
    • DHCP: fixed IPv4 leases being not correctly shown when NTP synchronizes time
    • DHCP: fixed DHCP error that occurred after changing the subnet of the LAN IP address in the setup wizard
    • Dynamic routes: fixed duplicated external routes cards
    • Firewall: fixed firewall zone validation when adding interfaces
    • Multi AP: fixed Multi AP not working with fast roaming
    • Multi AP: fixed switching to Multi AP mode fails due to encryption
    • Multi AP: fixed Multi AP configuration being deleted when switching mode on the same radio device
    • Network: fixed overriding MAC address for interfaces that are bridged
    • RelayD: fixed API error when "network" and "lan_mark" options are not present in a PUT request
    • Wireless: fixed wireless scan results sometimes not being returned
    • Wireless: fixed wireless status page not updating wireless SSID status after page is opened
    • Wireless: removed the ability to have different countries in radio configurations
    • Wireless: fixed interface delete when it's unassigned from the wireless interface in access point mode
    • Wireless: fixed backticks for WiFi SSID are not allowed in WebUI
  • Services
    • BACnet: fixed incorrect BACnet IP port used for sending responses
    • BGP: fixed route map sequence going out of range
    • BGP: fixed listen range field allowing multiple entries
    • DLMS: fixed DLMS test response format
    • DLMS: fixed COSEM group validation
    • DLMS: fixed API POST error for /dlms/devices/config endpoint
    • DLMS: fixed serial connection not working after reboot
    • DNP3 Client: fixed to allow reading objects past 255 index
    • DNP3 Client: fixed incorrect hints
    • DNP3 Outstation: fixed serial outstation starting issues
    • Hotspot: fixed uploading more than one custom theme
    • Hotspot: fixed creating Hotspot to SSID that is disabled
    • Hotspot: fixed displaying data limit columns and inputs
    • Hotspot 2.0: fixed Venue name and Operator's name field validations
    • IPsec: fixed connectivity issues when using WAN failover
    • IPsec: fixed the instance status when the local firewall option is disabled
    • Modbus Client: fixed test request option validation
    • Modbus Client: fixed alarm output action display values
    • Modbus Client: fixed incorrect period hint
    • Modbus Server: fixed APN register not clearing APN
    • Modbus Server: fixed 148 and 164 modbus registers
    • Modbus Server: fixed incorrect hints
    • OPC UA Server: fixed not starting while modem is down
    • OpenVPN: fixed displaying imported files from device
    • OpenVPN: fixed the private key decryption for cases when a password is used
    • OpenVPN: fixed data cipher migration
    • SMPP: fixed username bypass problem
    • SMPP: fixed password validation
    • SNMP: fixed GSM mSignal OID value type
    • SNMP: fixed GSM module memory leaks
    • SSTP: fixed functionality when the default route option is not enabled
    • Web Filter: fixed whitelist not working for some hosts when using IPv6
  • System
    • Administration: fixed repeated validation on cleared inputs and added validation when new password matches the old one
    • API Core: fixed API method validation during upload action
    • API Core: fixed error messages for POST method
    • API Core: fixed option list validation
    • Boot: fixed factory settings restore (firstboot) not deleting hidden files
    • Events Log: fixed refresh button in event log table
    • IP Block: fixed adding MAC addresses back to whitelist when unblocking all of them
    • Recipients: made phone number field required
    • Setup Wizard: fixed lan ip step not changing ip address
    • Troubleshoot: fixed system log and kernel log buttons to be enabled with read only rights
    • Update Firmware: fixed misleading "Firmware version" status of "N/A" to "FOTA service is disabled" when FOTA is disabled
    • Update Firmware: fixed issue when infinite spinner appears after updating device firmware from server without having internet connection
• CVE Patches
  • Patched CVE-2023-52425
  • Patched CVE-2023-52530
  • Patched CVE-2024-25629
  • Patched CVE-2024-28757

---

RUT14X_R_00.07.07.3 | 2024.06.25

• Fix
  • Network
    • WebUI: fixed port advertisement change
  • System
    • FOTA: fixed config when upgrading from older firmware with keep settings
• CVE Patches
  • CVE-2024-31950
  • CVE-2024-31951

---

RUT14X_R_00.07.07.2 | 2024.06.12

• Improvements
  • Network
    • Zerotier: added backup WAN interface blacklisting if WAN failover is enabled
  • Services
    • SNMP: added bruteforce attack prevention when using SNMP v3 user
    • L2TP: improved reconnect attempt logic
  • System
    • SSH: removed weak SSH algorithms
    • Telnet: moved to Package Manager
• Fix
  • Network
    • BGP: fixed instance migration issues
  • Services
    • DMVPN: fixed duplicate NHRP map entries creation
    • OpenVPN: added fixes for the insecure tls-cert-profile option usage
  • System
    • IP Block: fixed blocking of UDP traffic
    • Ledman: fixed WiFi LED indication when WiFi configuration is changed
    • Uboot: fixed firmware recovery update via uboot on Windows
• CVE Patches
  • CVE-2024-31948

---

RUT14X_R_00.07.07.1 | 2024.05.03

---

• Improvements
  • System
    • WebUI: improved first login password change logic
    • Certificates: updated Root CA certificates
• CVE Patches
  • CVE-2024-2397

RUT14X_R_00.07.07 | 2024.04.16

---

• Initial firmware release for RUT140