Template:Networking rutos manual serial utilities: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(14 intermediate revisions by 2 users not shown)
Line 14: Line 14:
This manual page provides an overview of the Serial Utilities page in {{{name}}} devices.
This manual page provides an overview of the Serial Utilities page in {{{name}}} devices.
{{#ifeq: {{#expr: {{{rs232}}} or {{{rs485}}}}}| 1 |==General information==|}}
{{#ifeq: {{#expr: {{{rs232}}} or {{{rs485}}}}}| 1 |==General information==|}}
{{#switch:{{{series}}}|TRB2| TRB2M =
{{#switch:{{{series}}}|TRB2| TRB2M | RUT206 =
===RS232/RS485===
===RS232/RS485===
----
----
====Connector pinout====
====Connector pinout====
----
----
For {{{name}}} pinout, please refer to <b>[[{{{name}}} Input/Output#16_pin_Connector_Pinout|Input/Output]]</b> page.| #default =
For {{{name}}} pinout, please refer to <b>[[QSG {{{name}}}#Front_view|QSG]]</b> page.| #default =
{{#ifeq: {{{rs232}}} | 1 |
{{#ifeq: {{{rs232}}} | 1 |
===RS232===
===RS232===
Line 25: Line 25:
====Connector pinout====
====Connector pinout====
----
----
The RS232 connector type on this device is a '''DCE female'''. DCE stands for Data Communication Equipment.  
The following table lists commonly used RS-232 signals ('''DTE male''' to '''DCE female'''). The RS232 connector type on device is a DCE female.


[[File:Services_rs232_connector.PNG|400px]]
[[File:Services_rs232_connector_v1.png|400px]]


<table class="nd-othertables">
<table class="nd-othertables">
Line 40: Line 40:
       <td>DCD</td>
       <td>DCD</td>
       <td>Data Carrier Detect</td>
       <td>Data Carrier Detect</td>
       <td>Output</td>
       <td>Input</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 46: Line 46:
       <td>RXD</td>
       <td>RXD</td>
       <td>Receive Data</td>
       <td>Receive Data</td>
       <td>Output</td>
       <td>Input</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 52: Line 52:
         <td>TXD</td>
         <td>TXD</td>
         <td>Transmit Data</td>
         <td>Transmit Data</td>
       <td>Input</td>
       <td>Output</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 58: Line 58:
         <td>DTR</td>
         <td>DTR</td>
         <td>Data Terminal Ready</td>
         <td>Data Terminal Ready</td>
       <td>Input</td>
       <td>Output</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 70: Line 70:
       <td>DSR</td>
       <td>DSR</td>
       <td>Data Set Ready</td>
       <td>Data Set Ready</td>
       <td>Output</td>
       <td>Input</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 76: Line 76:
         <td>RTS</td>
         <td>RTS</td>
         <td>Ready To Send</td>
         <td>Ready To Send</td>
       <td>Input</td>
       <td>Output</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 82: Line 82:
         <td>CTS</td>
         <td>CTS</td>
         <td>Clear To Send</td>
         <td>Clear To Send</td>
       <td>Output</td>
       <td>Input</td>
     </tr>{{#ifeq:{{{series}}}|TRB1|
     </tr>{{#ifeq:{{{series}}}|TRB1|
     <tr>
     <tr>
Line 88: Line 88:
         <td>RI</td>
         <td>RI</td>
         <td>Ring Indicator</td>
         <td>Ring Indicator</td>
       <td>Output (connected to +3.8V permanently via a 4.7k resistor) </td>
       <td>Input (connected to +3.8V permanently via a 4.7k resistor) </td>
     </tr>|
     </tr>|
     <tr>
     <tr>
Line 94: Line 94:
         <td>RI</td>
         <td>RI</td>
         <td>Ring Indicator</td>
         <td>Ring Indicator</td>
       <td>Output (connected to +5V permanently via a 4.7k resistor) </td>
       <td>Input (connected to +5V permanently via a 4.7k resistor) </td>
     </tr>}}
     </tr>}}
</table>
</table>
Line 232: Line 232:


===Status===
===Status===
[[File:Networking_rutos_manual_serial_utilities_modem_control_status.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_serial_utilities_modem_control_status.png|border|class=tlt-border]]


===General settings===
===General settings===
{{#ifeq:{{{dual_modem}}} | 1 |
 
[[File:Networking_rutos_manual_serial_utilities_modem_control_dual_modem_.png|border|class=tlt-border]]|
[[File:Networking_rutos_manual_serial_utilities_modem_control.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_serial_utilities_modem_control.png|border|class=tlt-border]]
}}


<table class="nd-mantable">
<table class="nd-mantable">
Line 274: Line 272:
     <tr>
     <tr>
     <td>Baud rate (USB)</td>
     <td>Baud rate (USB)</td>
         <td>integer [300..115200]; default:<b>9600</b></td>
         <td>integer [300..4000000]; default:<b>9600</b></td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
     </tr>|}}
     </tr>|}}
Line 318: Line 316:
             </ul>
             </ul>
         </td>
         </td>
     </tr> |}}
     </tr>|}}
     <tr>
     <tr>
         <td>Mode</td>
         <td>Mode</td>
Line 328: Line 326:
             </ul>
             </ul>
         </td>
         </td>
     </tr>{{#ifeq: {{{rs485}}} | 1 |
     </tr>{{#switch: {{{series}}} | RUT206 = | #default = {{#ifeq: {{{rs485}}} | 1 |
     <tr>
     <tr>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
     </tr>|}}|}}
     </tr>|}}}}
</table>


===Advanced settings===
===Advanced settings===
[[File:Networking_rutos_manual_serial_utilities_modem_control_advanced_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_serial_utilities_modem_control_advanced_settings.png|border|class=tlt-border]]


Line 354: Line 354:
       <td>Forwards data to modem only when new line symbol ('\n') is detected.</td>
       <td>Forwards data to modem only when new line symbol ('\n') is detected.</td>
     </tr>
     </tr>
</table>
</table>|}}


{{#switch: {{{name}}} | TRB143 = | #default = ==Console==  
{{#switch: {{{name}}} | TRB143 = | #default = ==Console==  
Line 399: Line 399:
     <tr>
     <tr>
     <td>Baud rate (USB)</td>
     <td>Baud rate (USB)</td>
         <td>integer [300..115200]; default:<b>9600</b></td>
         <td>integer [300..4000000]; default:<b>9600</b></td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
     </tr>|}}
     </tr>|}}
Line 432: Line 432:
             </ul>|}}
             </ul>|}}
         </td>
         </td>
     </tr>{{#ifeq: {{{rs485}}} | 1 |
     </tr>{{#switch: {{{series}}} | RUT206 = | #default = {{#ifeq: {{{rs485}}} | 1 |
     <tr>
     <tr>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
     </tr>|}}
     </tr>|}}}}
</table> }}
</table> }}


Line 488: Line 488:
     <tr>
     <tr>
     <td>Baud rate (USB)</td>
     <td>Baud rate (USB)</td>
         <td>integer [300..115200]; default:<b>9600</b></td>
         <td>integer [300..4000000]; default:<b>9600</b></td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
         <td>Data rate for serial data transmission (in bits per second (bps)).</td>
     </tr>|}}
     </tr>|}}
Line 521: Line 521:
             </ul>|}}
             </ul>|}}
         </td>
         </td>
     </tr>{{#ifeq: {{{rs485}}} | 1 |
     </tr>{{#switch: {{{series}}} | RUT206 = | #default = {{#ifeq: {{{rs485}}} | 1 |
     <tr>
     <tr>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td><span style="color: purple;">RS485:</span> Full Duplex</td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
       <td>Turns Full Duplex mode on or off. This option is available only on the RS485 device.</td>
     </tr>|}}{{#ifeq: {{{rs232}}} | 1 |
     </tr>|}}}}{{#ifeq: {{{rs232}}} | 1 |
     <tr>
     <tr>
       <td><span style="color: green;">RS232:</span> Echo</td>
       <td><span style="color: green;">RS232:</span> Echo</td>

Latest revision as of 08:26, 22 November 2024

The information in this page is updated in accordance with firmware version .


Summary

The Serial Utilities page is used to make serial communication configurations of different types. This manual page provides an overview of the Serial Utilities page in {{{name}}} devices.



Console

Console mode requires no further configuration than the settings above and is used as a direct-access method to the device's shell interface. For this purpose you may want use such applications as PuTTY on Windows and microcom, minicom, picocom or similar applications on Linux.

Status

General settings

Field Value Description
Enable off | on; default: off Turns the instance on or off.
Name string; default: none Instance name, generated by the user when first creating the configuration.
Device ; default: Specifies which serial port will be used for serial communication.
Data bits 8; default: 8 Number of data bits for each character.
Stop bits 1 | 2; default: 1 Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronize with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.
Parity None | Odd | Even | Mark | Space; default: None In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
  • None (N) - no parity method is used.
  • Odd (O) - the parity bit is set so that the number of "logical ones (1s)" has to be odd.
  • Even (E) - the parity bit is set so that the number of "logical ones (1s)" has to be even.
Flow control None; default: None In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.

Over IP

The Over IP serial type is used to manage serial connections over a TCP/IP network.

Instance Example

Here's an example demonstrating Over IP in action, running in Client + Server Mode.

Serial Device Configuration

Configure serial port communication parameters in the Serial Device Configuration section.

[[File:Networking_rutos_manual_serial_utilities_over_ip_serial_default_{{{default}}}_v2.png|border|class=tlt-border]]

Field Value Description
Enable off | on; default: off Turns the instance on or off.
Name string; default: none Instance name, generated by the user when first creating the configuration.
Device ; default: Specifies which serial port will be used for serial communication.
Data bits 8; default: 8 Number of data bits for each character.
Stop bits 1 | 2; default: 1 Stop bits sent at the end of every character allow the receiving signal hardware to detect the end of a character and to resynchronise with the character stream. Electronic devices usually use one stop bit. Two stop bits are required if slow electromechanical devices are used.
Parity None | Odd | Even | Mark | Space; default: None In serial transmission, parity is a method of detecting errors. An extra data bit is sent with each data character, arranged so that the number of 1 bits in each character, including the parity bit, is always odd or always even. If a byte is received with the wrong number of 1s, then it must have been corrupted. However, an even number of errors can pass the parity check.
  • None (N) - no parity method is used.
  • Odd (O) - the parity bit is set so that the number of "logical ones (1s)" has to be odd.
  • Even (E) - the parity bit is set so that the number of "logical ones (1s)" has to be even.
Flow control None; default: None In many circumstances a transmitter might be able to send data faster than the receiver is able to process it. To cope with this, serial lines often incorporate a "handshaking" method, usually distinguished between hardware and software handshaking.

Over IP Configuration Settings

You can configure network related parameters of the serial connection in the Over IP Configuration secion.

Field Value Description
Mode Server | Client | Client + server | Bidirect; default: Server This device's role in the connection:
  • Server - the device waits for incoming connections.
  • Client - the device initiates the connection.
  • Client + server - launches service in server and client(s) mode simultaneously.
  • Bidirect - acts as client by default but waits for incoming connections at the same time.
Protocol TCP | UDP; default: TCP Protocol used in the communication process.
Client: Destination address IP | Port; default: empty Specify server address and port for client to connect to. E.g first field for address second for port. 16 destination addresses are allowed.
Server: UDP: Predefined addresses IP | Port; default: empty Set predefined IP and port for UDP connection. E.g first field for address second for port.
Listening port [1..65535]; default: empty When enabled, all data will be transmitted transparently.

Field Value Description
Use TLS/SSL off | on; default: off Mark to use TLS/SSL for connection.
TLS version Support all | tlsv1.0 | tlsv1.1 | tlsv1.2 | tlsv1.3; default: Support all Minimum TLS version allowed to be used.
TLS type Certificate based | Pre-Shared-Key based; default: Certificate based Select the type of TLS encryption.
Require certificate off | on; default: on Demand certificate and key from peer and verify them against certificate authority.
Verify host off | on; default: off Check if the server certificates Common Name (CN) matches hostname to which client is connecting.
Certificate files from device off | on; default: off Choose this option if you want to select certificate files from device.
Certificate files can be generated <a class=link href="/system/admin/certificates/generation">here</a>.
Certificate file .crt file; default: none Upload certificate file.
Key file .key file; default: none Upload key file.
CA file .ca file; default: none Upload CA file.
Pre-Shared-Key string; default: none The pre-shared-key in hex format with no leading “0x”.
Identify string; default: none Specify the identity.

Field Value Description
Raw mode off | on; default: on When enabled, all data will be transmitted transparently.
Remove all zeros off | on; default: off When checked, indicates that the first hex zeros should be skipped.
Inactivity timeout integer [0..36000]; default: 300 Specifies period of time in seconds, where server connection must be inactive, to disconnect client. To disable timeout input 0.
Serial timeout integer [0..1000]; default: none Specifies the maximum milliseconds to wait for serial data.
Max clients integer [1..32]; default: 4 Specify how many clients are allowed to connect simultaneously.
TCP echo on | off; default: off Enable software TCP echo.
Close connections on | off; default: off Close TCP connections everytime data is sent or received (might result in serial data loss).
Keep alive on | off; default: off Enable keep alive.
Keep alive time integer [0..32000]; default: 0 Close TCP connections everytime data is sent or received (might result in serial data loss).
Keep alive interval integer [0..32000]; default: 0 The interval between subsequential keepalive probes.
Keep alive probes integer [0..32000]; default: 0 The number of unacknowledged probes.

IP Filter

The IP Filter section is used for configuring which network is allowed to communicate with the device. You may add a new instance by selecting the Interface and pressing Add.

Then enter the IP address and save.

[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_serial_utilities&oldid=137355"