Template:Networking rutos manual opcua server: Difference between revisions

Latest revision as of 10:54, 13 January 2025

OPC UA Server

This manual page provides an overview of the OPC UA Server in {{{name}}} devices.

Note: OPC UA Server is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

Status

This section displays OPC UA Server status information.

OPC UA Server Configuration

The OPC UA Server Configuration section is used to enable the local OPC UA server.

Field	Value	Description
Enable	off \| on; default: off	Enables OPC UA server.
Port	integer [1..65535]; default: none	Service port.

OPC UA Server variables

All RUTOS device variables are described in the table below:

Note: All the variables have these qualities in common:

Namespace index is 1
Node ID type is string
Read-only
Updated upon request

ID	Type	Description
sys_uptime	UINT32	System uptime in seconds.
sys_serial	String	Device serial number.
sys_devname	String	Device name.
sys_devcode	String	Device code.
sys_version	String	Firmware version.
sys_hostname	String	Hostname.
lan_mac	String	LAN MAC address.
lan_ip	String	IP address of LAN interface.
lan_mask	String	Subnet mask of LAN interface.
lan_gateway	String	Gateway IP address of LAN interface.
lan_dns	Array of String	IP addresses of LAN interface DNS servers.
rut_wan_ip	String	IP address if WAN is connected.
rut_wan_type	String	Values of WAN type.

@@ Line 1: / Line 1: @@
-{{Template: Networking_device_manual_fw_disclosure
+==OPC UA Server==
-| series = {{{series}}}
-| name   = {{{name}}}
-| fw_version ={{Template: Networking_device_manual_latest_fw
- | series = {{{series}}}
- | name   = {{{name}}}
- }}
-}}
-__TOC__
-==Summary==
-OPC Unified Architecture (<b>OPC UA</b>) is a cross-platform, open-source, IEC62541 standard for data exchange from sensors to cloud applications developed by the OPC Foundation. The <i>UA</i> in OPC UA stands for “Unified Architecture” and refers to the latest specification of the standard. It differs from its predecessor in that it is platform-independent, moving away from COM/DCOM to purely binary TCP/IP or alternatively SOAP.
-----
 This manual page provides an overview of the OPC UA Server in {{{name}}} devices.
 <b>Note:</b> OPC UA Server is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.
-==Status==
+===Status===
 This section displays OPC UA Server status information.
@@ Line 22: / Line 11: @@
 [[File:Networking_rutos_manual_opcua_opcua_servers_server_status.png|border|class=tlt-border]]
-==OPC UA Server Configuration==
+===OPC UA Server Configuration===
 The <b>OPC UA Server Configuration</b> section is used to enable the local OPC UA server.
@@ Line 47: / Line 36: @@
-==OPC UA Server variables==
+===OPC UA Server variables===
 All <b>RUTOS</b> device variables are described in the table below:
@@ Line 119: / Line 108: @@
      </tr>
      <tr>
-         <td>wan_ip</td>
+         <td>rut_wan_ip</td>
-         <td>Array of String</td>
+         <td>String</td>
-         <td>IP address of WAN interface.</td>
+         <td>IP address if WAN is connected.</td>
+    </tr>
+    <tr>
+        <td>rut_wan_type</td>
+        <td>String</td>
+        <td>Values of WAN type.</td>
      </tr>
 {{#ifeq:{{{digitalio}}}| 1 |
@@ Line 285: / Line 279: @@
      </tr>|}}
 </table>
-[[Category:{{{name}}} Services section]]