Jump to content

RUTM30 Firmware Downloads: Difference between revisions

No edit summary
m Text replacement - "This firmware was removed due an issue with Failover functionality." to "To ensure optimal performance, this firmware version has been removed after identifying a situation where the Failover functionality may not operate as expected."
 
(23 intermediate revisions by 2 users not shown)
Line 7: Line 7:
==Changelog==
==Changelog==
<!--NEW_FW-->
<!--NEW_FW-->
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.20/RUTM/RUTM_R_00.07.20_WEBUI.bin RUTM_R_00.07.20]</span></b> | 2025.12.16===
* <b>New</b>
** <b>Network</b>
*** Mobile: added "mobileinternet.tele2.lt" APN for "Tele2" operator to APN database
*** Wireless: added support for a global installation type option for radio devices
** <b>Services</b>
*** Data to Server: added IEC 60870-5 Client as an input
*** IEC 60870-5 Client: added IEC 60870-5-104 Client
*** IEC 60870-5 Server: added IEC101 and IEC104 support
** <b>System</b>
*** Package Manager: added CIFS/SMBFS filesystem support
* <b>Improvements</b>
** <b>Network</b>
*** 802.1X Client: updated 802.1x validation so that 802.1x client can no longer be enabled on a port that is disabled
*** 802.1X Server: updated 802.1x validation so that 802.1x server can no longer be enabled on a port that is disabled
*** DHCP server: improved "DHCPv6-Mode" field's option names and hints
*** Mobile: improved log message when no primary SIM is set
*** Mobile: improved DFOTA log message when checking for updates
*** Mobile: added creation of mobile network interface on eSIM profile installation if one does not exist
*** Mobile: added "Switch to next SIM" button in 'Status -> Mobile' page
*** Mobile: improved mobile data connection establishment time
*** Mobile: improved mobile connection bring up behavior when the "Service option not subscribed" error is received
*** Multi WAN: added IPv4 and IPv6 WAN interface coexistence warning
*** Network: improved "Force link" field hint
*** Network: fixed "Force link" field to respect default value when changing interface protocol
*** SSHFS: updated setting fields to be shown when service is disabled
*** SSHFS: added directory as prefix to "Mount point" field
*** ethtool: updated version to 6.10
** <b>Services</b>
*** AWS IoT Core: updated orange error status to be red
*** Azure IoT Hub: updated status columns to use text badges instead of circle icons
*** Data to Server: updated input sections to be toggleable
*** Data to Server: added certificates to global certificate manager
*** Data to Server: increased the limit for Modbus data filtering entries
*** Event juggler: added certificates to global certificate manager
*** I/O Juggler: added certificates to global certificate manager
*** I/O Status: moved all custom I/O configuration from table to the edit
*** I/O Status: updated all I/O pinout and Power pinout icons
*** L2TP: improved adding custom options to the configuration
*** MQTT Broker: added certificates to global certificate manager
*** MQTT Broker Bridge: added certificates to global certificate manager
*** MQTT Publisher: added certificates to global certificate manager
*** SMPP: added certificates to global certificate manager
*** SNMP: added additional info to Trap message
** <b>System</b>
*** Certificates: changed SCEP enrollment to try AES first and fall back to 3DES
*** RutOS: updated login banner to include internal API usage
*** Kernel: updated version to 6.6.115
* <b>Fix</b>
** <b>Network</b>
*** 802.1X Client: fixed incorrectly displaying port link state
*** Firewall: removed low contrast zone colors
*** Mobile: fixed failure to create network interface configuration section for a new eSIM profile
*** Mobile: fixed SMS Limit excessive logging
*** Network: fixed PPPoE client options not being removed after switching to other protocol
*** Network: fixed routing table rules not matching interface metric order
*** Realtime Traffic: fixed traffic history not showing up in some cases
*** Realtime Traffic: fixed plot background rendering when switching between plots
*** Realtime Traffic: fixed plot popover position on Firefox 143 and later
*** Wireless: fixed latency spikes after wireless roam
*** Wireless: fixed authentication timeout during fast transition
*** Wireless: fixed retrieving empty cached wireless scan results
** <b>Services</b>
*** Azure IoT Hub: fixed empty status hint
*** DNP3 Client: fixed display issues with long request names
*** DNP3 Outstation: fixed display issues with long request names
*** Dynamic DNS: fixed bind-nsupdate method not working on multi-level subdomains
*** Event juggler: fixed HTTP action request type
*** Hotspot: fixed session data delete when deleting user
*** IPsec: fixed unstable connections with software flow offloading enabled
*** L2TP: fixed log display in WebUI
*** Modbus Client: fixed duplicate query parameters validation in database entries endpoint
*** Modbus Client: fixed display issues with long request names
*** Modbus Server: fixed display issues with long request names
*** MQTT Broker: fixed 'Allow persistence' option
*** OPC UA Client: fixed duplicate query parameters validation in database entries endpoint
*** OPC UA Client: fixed API error when 'server_node' option had an incorrect type in group values test endpoint
*** OpenVPN: fixed status in Static Key Authentication mode
*** OpenVPN: fixed handling of 'user' and 'group' parameters
*** RMS: fixed connection status jumping between "Connecting" and "Connected" states
*** SMS Utilities: fixed script action execution when arguments are provided
** <b>System</b>
*** Certificates: fixed importing DER keys to TPM
*** RutOS: fixed rare UCI deadlock causing system hangs
*** Speed Test: fixed selecting WAN interface when using servers with IPv6 support
*** System Users: fixed redundant /etc/group member creation
*** WebUI: fixed target area that triggers hint text
* <b>CVE Patches</b>
** CVE-2025-46394 - 3.3 (LOW)
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.19.4/RUTM/RUTM_R_00.07.19.4_WEBUI.bin RUTM_R_00.07.19.4]</span></b> | 2025.12.05===
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed operator selection under specific conditions
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.19.2/RUTM/RUTM_R_00.07.19.2_WEBUI.bin RUTM_R_00.07.19.2]</span></b> | 2025.11.26===
* <b>Fix</b>
** <b>System</b>
*** Update Firmware: fixed firmware download cancellation
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.19.1/RUTM/RUTM_R_00.07.19.1_WEBUI.bin RUTM_R_00.07.19.1]</span></b> | 2025.11.12===
* <b>Fix</b>
** <b>System</b>
*** WebUI: fixed unresponsive navigation after password change
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.19/RUTM/RUTM_R_00.07.19_WEBUI.bin RUTM_R_00.07.19]</span></b> | 2025.11.06===
* <b>New</b>
** <b>Network</b>
*** Mobile: added "web.unomobile.it" APN for "1Mobile" operator to APN database
* <b>Improvements</b>
** <b>Network</b>
*** DHCP server: added message to Events Log when there are no available DHCP addresses
*** Firewall: added status to Traffic Rule page
*** Firewall: added status to Port Forwards page
*** Firewall: added status to NAT page
*** Firewall: added status to DMZ page
*** Firewall: updated status page to have chain and rule tables for better searchability
*** Firewall: added shortcuts from firewall rules in status page to firewall configurations that created them
*** HTTPS DNS Proxy: disabled field requirements when service is disabled
*** Mobile: improved mobile operator parsing for connection establishment
*** Mobile: added support for eSIM to Mobile Usage page
*** Mobile: updated default SIM selection in Mobile General page
*** Mobile: added switch to disable local DHCPv4 leases when operating in bridge mode
*** Mobile: added more information about SIM state changes in logs
*** Mobile: improved error handling during mobile data connection bringup
*** NAT64: added status to NAT64 page
*** Network: improved DHCP client and server related fields
** <b>Services</b>
*** Cloud of Things: changed communication from HTTP to MQTT
*** Cumulocity: changed communication from HTTP to MQTT
*** Data to Server: added new parameters (Custom name and pin value) in I/O input plugin
*** EoIP: added IPv6 support
*** Event juggler: added `io_reset` option
*** GRE: added IPv6 support
*** Impulse Counter: increased status loading speed
*** MQTT Modbus Gateway: added validation to discard responses with invalid ID or function code
*** OpenVPN: improved page load speed by removing duplicate data request
*** SNMP: added SET support for universal gateway tag value table
*** Stunnel: added support for using IPv6 addresses in the connect IPs field
*** Wireguard: added wireguard watchdog support
*** cURL: updated version to 8.16.0
*** OpenVPN: updated version to 2.6.14
** <b>System</b>
*** Custom Scripts: added page loading spinner
*** Speed Test: added support for custom server url
*** Update Firmware: improved FOTA communication and caching logic
*** WebUI: improved usability on small screens
*** Kernel: updated version to 6.6.108
*** PAM: updated version to 1.7.1
* <b>Fix</b>
** <b>Network</b>
*** DHCP server: fixed DHCPv6 server reload when changing VLAN
*** DNS: fixed "Static addresses" and "Custom redirect" field required validation
*** Dynamic routes: fixed services other than EIGRP restarting on network change
*** Firewall: added IPsec and OpenConnect configurations as possible networks
*** Firewall: fixed NAT extra custom rules not applying after FW upgrade
*** HTTPS DNS Proxy: fixed DNS requests failing after obtaining new IP
*** Mobile: fixed informational messages when SIM configuration is not found
*** Mobile: fixed configuration files after ESIM deletion
*** Mobile: fixed IPv4/IPv6 type mobile reconnection loop if one type has unsuccessful connection
*** Mobile: fixed updating modem firmware when custom root CA is configured
*** Mobile: fixed eSIM profile display for profiles without provider value
*** Mobile: fixed missing modem firmware version after modem firmware update
*** Multi WAN: fixed Multi WAN interface creation
*** Wireless: fixed invalid mesh interface encryption data reporting
*** Wireless: fixed excessive Wi-Fi service log file creation due to service restarts
*** Wireless: fixed "Allow legacy 802.11b rates" option not working properly
*** Wireless: fixed missing background scan data in learn mode
** <b>Services</b>
*** DLMS: fixed access error when reading an empty sort object attribute on a generic profile object
*** DLMS: fixed "Entries" not being clamped for "Profile generic" COSEM type
*** DMVPN: fixed custom changes in IPsec, GRE and NHRP pages being reverted when saving DMVPN instance
*** DNP3 Client: fixed dnp3 test function printing analog values in wrong format
*** DNP3 Client: fixed always shown warning notification by displaying status hints for affected requests
*** Dynamic DNS: fixed "Check interval" and "Force interval" validation issues
*** Email to SMS: fixed process hang during email handling
*** Impulse Counter: fixed duplicate values in 'GPIO pin' dropdown
*** Impulse Counter: fixed deleting impulse counter data records
*** IPsec: fixed an issue where connections could be re-initiated even while being active
*** IPsec: fixed authentication issue when using multiple instances with the PSK authentication method
*** IPsec: fixed Xauth connections not establishing when identifiers are set
*** IPsec: fixed wrong active client information when using certificates
*** IPsec: fixed incorrect uptime display when using multiple responder instances
*** L2TP: fixed L2TP over IPsec connection issue
*** L2TPv3: fixed parameter validation for IPv6 addresses in configuration
*** Modbus Client: fixed email and MQTT alarm actions running longer than intended
*** Modbus Client: fixed always shown warning notification by displaying status hints for affected requests
*** Modbus Client: fixed test request endpoints failing if 'broadcast' option is not provided
*** MQTT Broker: fixed TLSv1.1 configuration
*** OpenConnect: fixed 'Get server fingerprint' feature on IPv6 servers
*** OpenConnect: fixed displaying IPv6 address under Tunnel IP address
*** OpenVPN: fixed parsing uploaded custom OpenVPN configuration
*** OpenVPN: fixed issues with parsed fields being displayed after config deletion
*** OpenVPN: fixed configuration parsing issues related to security options
*** SMS Forwarding: fixed certificate verification disabling
*** Wireguard: fixed creation of routes to endpoint host when default route is not set
** <b>System</b>
*** Access Control: fixed displaying certificates in "HTTPS" edit modal after page refresh
*** Administration: fixed incorrect creation date of user's default configuration
*** API Core: fixed API error on 'DELETE' request with bad payload structure
*** Events Log: fixed sorting reset functionality of table columns and "Event group" column issues
*** Setup Wizard: fixed redirect of "RMS" step
*** System Users: fixed multiple network pages working improperly with non-root users
*** WebUI: fixed "visible columns" button to be clickable for users without "write" permissions
*** WebUI: removed bell notifications from modals
*** WebUI: fixed length validation for custom input values in select lists
*** WebUI: fixed active state of filters on tables
* <b>CVE Patches</b>
** CVE-2025-4373 - 4.8 (MEDIUM)
** CVE-2025-6020 - 7.8 (HIGH)
** CVE-2025-6052 - 7.5 (HIGH)
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.18.3/RUTM/RUTM_R_00.07.18.3_WEBUI.bin RUTM_R_00.07.18.3]</span></b> | 2025.10.30===
* <b>Improvements</b>
** <b>System</b>
*** ubus: updated version to 2025-10-19
* <b>Fix</b>
** <b>System</b>
*** Backup: fixed issues uploading older backup files
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.18.2/RUTM/RUTM_R_00.07.18.2_WEBUI.bin RUTM_R_00.07.18.2]</span></b> | 2025.10.22===
* <b>Fix</b>
** <b>Services</b>
*** IPsec: fixed issue where IPsec connections failed during WAN failover
*** OpenVPN: fixed status issue after firmware upgrade
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.18.1/RUTM/RUTM_R_00.07.18.1_WEBUI.bin RUTM_R_00.07.18.1]</span></b> | 2025.10.13===
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed operator selection under specific conditions
----
===<b>RUTM_R_00.07.18</b> | 2025.10.01===
<b>Note:</b> To ensure optimal performance, this firmware version has been removed after identifying a situation where the mobile operator might be selected incorrectly under specific circumstances.
* <b>New</b>
** <b>Network</b>
*** Mobile: added historical signal information display
*** Mobile: added "internet" APN for "Telenor" operator to APN database
*** Starlink: added Starlink management support
* <b>Improvements</b>
** <b>Network</b>
*** Channel Analysis: aligned X axis ticks to 5GHz channels
*** Channel Analysis: removed low contrast color from possible figure colors
*** Channel Analysis: added diamond decoration showing primary channel position
*** DHCP server: added option 82 support to DHCP relay
*** Mobile: added SIM switch historical data
*** Mobile: improved SIM switch status information
*** SSHFS: updated mount point location
*** Dnsmasq: updated version to 2.90
*** Iperf3: updated version to 3.19.1
** <b>Services</b>
*** DLMS: improved COSEM value reading speed
*** DNP3 Client: added DNP3 client support for universal gateway
*** DNP3 Outstation: increased status report responsiveness
*** Input/Output: added "time" and "delay" options to I/O state change API endpoint
*** IPsec: added requirement for local certificate and key fields when X.509 authentication method is selected
*** IPsec: added improvements for IPv6 support
*** Modbus Client: increased test button and status report responsiveness
*** Modbus Client: made number zero as valid server ID
*** Modbus Client: added broadcast support
*** Modbus Server: increased status report responsiveness
*** Modbus Server: added broadcast support
*** MQTT Modbus Gateway: added broadcast support
*** OpenVPN: removed disabled state from "logs" and "active clients" when user has no write permissions
*** OpenVPN: improved error messages
*** OpenVPN: added user and password options for export client configuration
*** SMS Utilities: added a warning about enabled SMS limit
** <b>System</b>
*** Access Control: added JSON-RPC enable toggle
*** JSON-RPC: moved to Package Manager
*** Update Firmware: added event log item about modem firmware update
*** WebUI: added indicators when a form input inside an inactive tab was changed or invalid
*** WebUI: added "Skip to main content" accessibility feature
*** WebUI: improved multi select design
*** WebUI: improved styles of drag hint on smaller screens
*** WebUI: improved consistent formatting across all hints
* <b>Fix</b>
** <b>Network</b>
*** 802.1X Server: fixed redirect link to "Radius" page
*** 802.1X Server: fixed unsupported Guest VLAN option being displayed
*** Channel Analysis: fixed 20 and 160 MHz width parsing
*** Channel Analysis: fixed inconsistent figure widths between same width channels
*** Channel Analysis: centered figures using center channels instead of primary ones
*** Channel Analysis: fixed chart display when signal goes below -100 dBm
*** Mobile: fixed excessive SIM switching after changing configuration
*** Mobile: fixed segmentation fault during SIM switching
*** Mobile: fixed APN database backup and restore functionality
*** Multi WAN: fixed incorrect log trigger
*** Network: fixed interface settings change when framed routing is enabled
*** Network usage: fixed table columns visual bugs
*** Wireless: fixed VHT operation IE values for 20MHz channel width to be the same regardless static/automatic channel configuration
** <b>Services</b>
*** Call Utilities: fixed answer action not triggering on second call
*** Data to Server: fixed Modbus input raw data sending when data type is Modbus PDU
*** Hotspot: fixed console errors that occurred in certain scenarios when enabling or disabling an instance
*** Hotspot 2.0: removed OSU provider
*** IPsec: fixed field validation to support % in custom options
*** Modbus Client: fixed PDU data type data collection
*** OpenVPN: fixed permissions for using IP Block
*** RMS: fixed RMS authentication under poor internet conditions
*** SMS Utilities: fixed mobile data usage display when mobile data is turned off
*** SMS Utilities: fixed incorrect 'Firmware on server' status message shown without internet connection
*** Stunnel: fixed disabled state of "enable" switch in overview page
*** Zerotier: fixed excessive ARP flooding on Zerotier interfaces
** <b>System</b>
*** Administration: fixed "User group" input validation
*** API Core: fixed double quoted boundary parsing
*** Kernel: fixed compilation of 'fs-cifs' kernel module package
*** Profiles: fixed endpoint response when calling from internal API
*** UI Core: fixed 'Save & Apply' button reachability on mobile devices
*** Update Firmware: fixed incorrect FOTA address in SDK
*** WebUI: fixed text-area width issues on small screen devices
* <b>CVE Patches</b>
** CVE-2025-6021
** CVE-2025-32415
** CVE-2025-49794
** CVE-2025-49796
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.17.5/RUTM/RUTM_R_00.07.17.5_WEBUI.bin RUTM_R_00.07.17.5]</span></b> | 2025.09.30===
* <b>Improvements</b>
** <b>Network</b>
*** Mobile: added ability to download eSIM profiles via Setup Wizard
* <b>Fix</b>
** <b>Network</b>
*** Mobile: fixed possible hang when downloading eSIM profile
*** Network: fixed assigning interface to incorrect firewall zone when changing its settings
** <b>Services</b>
*** Ledman: fixed possible undefined LED behavior
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.17.4/RUTM/RUTM_R_00.07.17.4_WEBUI.bin RUTM_R_00.07.17.4]</span></b> | 2025.09.17===
* <b>Fix</b>
** <b>System</b>
*** Profiles: fixed keep-settings execution for older profiles
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.17.3/RUTM/RUTM_R_00.07.17.3_WEBUI.bin RUTM_R_00.07.17.3]</span></b> | 2025.09.05===
* <b>Improvements</b>
** <b>Services</b>
*** Tailscale: updated version to 1.86.2
* <b>Fix</b>
** <b>Services</b>
*** Web Filter: fixed host blocking with hotspot interfaces
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.17.2/RUTM/RUTM_R_00.07.17.2_WEBUI.bin RUTM_R_00.07.17.2]</span></b> | 2025.09.02===
* <b>Improvements</b>
** <b>Network</b>
*** iwinfo: updated version to 2025-02-06
* <b>Fix</b>
** <b>Network</b>
*** DNS: fixed saving of DNS server IPs
*** Mobile: fixed SIM switch rule triggering unexpectedly due to NTP time adjustments
** <b>Services</b>
*** Tailscale: fixed dns resolution errors caused by enabling MagicDNS
** <b>System</b>
*** Backup: fixed keep-settings execution for older backups
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.17.1/RUTM/RUTM_R_00.07.17.1_WEBUI.bin RUTM_R_00.07.17.1]</span></b> | 2025.08.19===
* <b>Fix</b>
** <b>Network</b>
*** Multi WAN: fixed failover startup after reboot
----
===<b>RUTM_R_00.07.17</b> | 2025.08.12===
<b>Note:</b> To ensure optimal performance, this firmware version has been removed after identifying a situation where the Failover functionality may not operate as expected.
* <b>New</b>
** <b>Network</b>
*** Mobile: added "du.soracom.io" APN for "Soracom" carrier to APN database
*** Mobile: added "m2m" APN for "Cellhire IoT" operator to APN database
*** Mobile: added "internet" APN for "Cellhire" operator to APN database
*** Mobile: added "tis.com" APN for "Sparkle" operator to APN database
** <b>System</b>
*** RutOS: added instructions for creating a simple package using the SDK
* <b>Improvements</b>
** <b>Network</b>
*** 802.1X Server: simplified new instance creation
*** 802.1X Server: added alert to notify when the 802.1X server no longer manages VLANs
*** Mobile: added IPv4 or IPv6 data connection information in event log
*** Mobile: added signal data collection
*** Multi WAN: added drag & drop operation for the "Failover" mode
*** Realtime Traffic: added ability to see up to 1 hour of live data
*** VRF: added VPN selection support in the WebUI
*** hostapd: updated version to 2025-05-23
*** Iperf3: updated version to 3.19
** <b>Services</b>
*** Auto Reply: increased SMS text length from 3 to 8 messages
*** Call Utilities: increased SMS text length from 3 to 8 messages
*** Email Relay: simplified new instance creation
*** Event juggler: added call action functionality to hang up the call after a specified time
*** Event juggler: increased SMS text length from 3 to 8 messages
*** Event juggler: added live character counter for SMS messages
*** Hotspot 2.0: deprecated OSU provider
*** Mobile Utilities: added WebUI notifications for received messages and triggered SMS rules
*** Mobile Utilities: added UCI ACL rules
*** Package Manager: added confirmation modal when removing multiple packages
*** SMS Utilities: increased SMS text length from 3 to 8 messages
*** Traffic Logging: improved Hotspot data stream retrieval
** <b>System</b>
*** Administration: added notifications and alerts display toggles
*** Administration: updated certificates page
*** Package Manager: added WebUI notifications for successful and failed package installations
*** UI Core: changed all chart styles
*** WebUI: updated brand color palette
*** WebUI: added sensitive information hiding feature for 'IMSI', 'ICCID' and 'IP address' fields for lower privilege users
*** WebUI: added truncation and hover tooltips for long side widget card titles
*** WebUI: unified the "Change Password" page title
*** Kernel: updated version to 6.6.96
* <b>Fix</b>
** <b>Network</b>
*** 802.1X Server: fixed EAP "SUCCESS" response when authentication fails due to not being able to find the RADIUS requested VLAN
*** Data limit: fixed interface data limit not being reset when interface is down
*** DHCP server: fixed DHCPv6 server reload when changing VLAN
*** DHCP server: fixed wrong DHCPv4 server conflict message being displayed when both interfaces have no device assigned
*** HTTPS DNS Proxy: fixed typo in the configuration page
*** Mobile: fixed issue where auto subnet selection used incorrect subnet mask in Bridge or Passthrough modes
*** Mobile: fixed modem driver network stats cleanup on modem restart
*** Mobile: fixed mobile connection loop on unsuccessful ping
*** VLAN: fixed a missing validation message in the WebUI when VLAN migration is restricted
*** Wireless: fixed default cipher not being returned from the API
*** Wireless: fixed an API error that occurred when joining a mesh network while a client network was present
*** Wireless: fixed wireless radio page loading incorrectly when user has limited permissions
** <b>Services</b>
*** Data to Server: fixed configuration clearing when plugin packages are deleted
*** DLMS: fixed missing API validation message for 'server_addr' option
*** DLMS: fixed service crashing when using "Register activation", "Activity calendar" and "Profile generic" COSEM types
*** DNP3 Client: fixed 'index' option API error in the 'requests' endpoints
*** Event juggler: fixed issue with enabling/disabling the WiFi interfaces
*** Hotspot: fixed redirect to custom success url with the same domain as landing page
*** Hotspot: fixed 'reset' button functionality and template input styles in 'Landing pages' page
*** I/O Juggler: fixed minor validation bugs
*** I/O Juggler: fixed log generation on reboot action
*** Impulse Counter: fixed duplicate query parameter validation
*** Impulse Counter: fixed input re-initiation
*** Input/Output: fixed incorrect assigning of input/output pins
*** IPsec: fixed intermittent errors when checking IPsec status
*** Modbus Client: fixed timeout behavior to not include serial device acquisition time
*** Modbus Server: fixed custom register block not working if count is more than 128 registers
*** SMS Utilities: fixed incorrect status in 5G operation mode
*** Tailscale: fixed routing issue with failover enabled
*** Wireguard: fixed incorrect route towards other peer being added
*** Wireguard: fixed Wireguard not re-adding default routes after deleting instance
** <b>System</b>
*** Access Control: fixed duplicate query parameter validation
*** Access Control: fixed HTTP WAN remote switch is shown as disabled after the "WAN to LAN" action
*** Administration: fixed device usage duplicate query parameter validation
*** Administration: fixed issue of "delete" button not being disabled on "System users" page when user has no write permissions
*** Events Log: fixed duplicate query parameter validation
*** IP Block: fixed MAC blocking interface validation
*** NTP Client: fixed fail count when operator synchronization is enabled
*** Package Manager: updated "View packages repository" link
*** Profiles: fixed issue that allowed deletion of profiles in use by the scheduler
*** Setup Wizard: fixed  "Setup Wizard" access issues with lower privilege users
*** WebUI: fixed notifications disappearing on page navigation
*** WebUI: fixed validation for fields using "url" rule
* <b>CVE Patches</b>
** CVE-2023-53154
** CVE-2024-31578
** CVE-2024-52533
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.16.6/RUTM/RUTM_R_00.07.16.6_WEBUI.bin RUTM_R_00.07.16.6]</span></b> | 2025.09.17===
* <b>Fix</b>
** <b>System</b>
*** Profiles: fixed keep-settings execution for older profiles
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.16.3/RUTM/RUTM_R_00.07.16.3_WEBUI.bin RUTM_R_00.07.16.3]</span></b> | 2025.07.28===
* <b>Fix</b>
** <b>System</b>
*** System Status: fixed SIM 1 and SIM 2 LEDs not working
----
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.16.2/RUTM/RUTM_R_00.07.16.2_WEBUI.bin RUTM_R_00.07.16.2]</span></b> | 2025.07.24===
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.16.2/RUTM/RUTM_R_00.07.16.2_WEBUI.bin RUTM_R_00.07.16.2]</span></b> | 2025.07.24===
* <b>New</b>
* <b>New</b>