SWM282 LEDs: Difference between revisions
Created page with "{{Template: Networking_swm_manual_leds <!------------------------DEVICE-----------------------> | name = SWM282 | series = SWM2 <!----------------------SEPARATORS---------------------> | file_power_led = Networking xxx manual panels front v1.png | size_power_led = 400 | eth_leds = 1 | file_eth_led = Networking_tsw200_manual_ethernet_port_LED_v2.png | size_eth = 350 | sfp_leds = 1 | file_sfp_led = Networking_tsw200_manual_sfp_port_LED_v1.png | size_sfp = 350 }}" |
m Vainius.l moved page Draft:SWM282 LEDs to SWM282 LEDs without leaving a redirect |
||
| (One intermediate revision by the same user not shown) | |||
| Line 4: | Line 4: | ||
| series = SWM2 | | series = SWM2 | ||
<!----------------------SEPARATORS---------------------> | <!----------------------SEPARATORS---------------------> | ||
| file_power_led = | | file_power_led = Networking_swm282_manual_power_led.png | ||
| size_power_led = | | size_power_led = 1000 | ||
| file_status_led = Networking_swm282_manual_status_led.png | |||
| size_status_led = 1000 | |||
| eth_leds = 1 | | eth_leds = 1 | ||
| sfp_leds = 1 | | sfp_leds = 1 | ||
}} | }} | ||
Latest revision as of 09:59, 27 August 2025
Main Page > SWM Switches > SWM282 > SWM282 Manual > SWM282 LEDsThis wiki page contains information about SWM282 switch LEDs and their actions.
Power LED
The power LED is located on the bottom left corner of the back panel, near the power connector:
It can perform two different actions:
| Action | Description |
|---|---|
| LED (GREEN) turned ON | Switch is powered up |
| LED turned OFF | Switch is not power up |
Status LED
The Status LED is located on the front panel, near the Power led:
It can perform two different actions:
| Action | Description |
|---|---|
| Blinks (GREEN) | Status (GREEN) blinks 3 times with interval of ~1 s when PROFINET "DCP Signal Service / Flash LED" feature is used |
| Blinks (RED) | Status (RED) blinking at ~1 s intervals when CPU temperature is between ≥92 °C and 95 °C |
| ON (RED) | Status (RED) on when CPU temperature is above 95 °C |
Ethernet port
| No. | Action | Describtion |  |
|---|---|---|---|
| 1 | Orange LED lit | 10/100 Mbps link established | |
| 2 | Orange LED blinking | Active link connection | |
| 3 | Green LED lit | 1000 Mbps link established | |
SFP port
| No. | Action | Describtion |  |
|---|---|---|---|
| 1 | Down LED lit | Lower port link established | |
| 2 | Down LED blinking | Lower port active traffic | |
| 3 | Up LED lit | Upper port link established | |
| 4 | Up LED blinking | Upper port active traffic | |