Template:Networking rut2xx manual network wan: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
(Created page with "==WAN== The <b>WAN</b> section displays information about the Main and Backup WAN connections. The figure below is an example of the Mobile page: File:Networking_rut2xx_ma...")
 
No edit summary
 
(7 intermediate revisions by 3 users not shown)
Line 3: Line 3:
The <b>WAN</b> section displays information about the Main and Backup WAN connections. The figure below is an example of the Mobile page:
The <b>WAN</b> section displays information about the Main and Backup WAN connections. The figure below is an example of the Mobile page:


[[File:Networking_rut2xx_manual_network_wan_information_v1.png]]
[[File:{{{file_wan}}}]]


<table class="nd-othertables_2>
<table class="nd-othertables_2">
     <tr>
     <tr>
         <th width=250>Field</th>
         <th width=250>Field</th>
Line 24: Line 24:
         <td>[[{{{name}}}_Mobile#Mobile_Configuration|Connection type]] or [[{{{name}}}_WAN#Common_Configuration|protocol]]. The value displayed in this field is dependent on used WAN type. Possible values are:
         <td>[[{{{name}}}_Mobile#Mobile_Configuration|Connection type]] or [[{{{name}}}_WAN#Common_Configuration|protocol]]. The value displayed in this field is dependent on used WAN type. Possible values are:
             <ul>
             <ul>
                 <li><b>Mobile WAN or USB modem</b>
                 <li><b>Mobile WAN</b>
                     <ul>
                     <ul>
                         <li><b>Qmi2</b> - Qualcomm MSM Interface, a proprietary protocol used between Qualcomm cellular processors and their software stacks</li>
                         <li><b>Qmi2</b> - Qualcomm MSM Interface, a proprietary protocol used between Qualcomm cellular processors and their software stacks</li>
Line 30: Line 30:
                     </ul>
                     </ul>
                 </li>
                 </li>
                 <li><b>Wired WAN</b></li>
                 <li><b>Wired WAN</b>
                     <ul>
                     <ul>
                         <li><b>DHCP</b> - Dynamic Host Configuration Protocol; the WAN network interface controller acts as a DHCP client, meaning that it receives a dynamically assigned IP address and other network configuration parameters</li>
                         <li><b>DHCP</b> - Dynamic Host Configuration Protocol; the WAN network interface controller acts as a DHCP client, meaning that it receives a dynamically assigned IP address and other network configuration parameters</li>
Line 36: Line 36:
                         <li><b>PPPoE</b> - Point-to-Point Protocol over Ethernet; used to establish a Digital Subscriber Line (DSL) Internet service connection</li>
                         <li><b>PPPoE</b> - Point-to-Point Protocol over Ethernet; used to establish a Digital Subscriber Line (DSL) Internet service connection</li>
                     </ul>
                     </ul>
                </li>
                 <li><b>WiFi WAN</b>
                 <li><b>WiFi WAN</b>
                     <ul>
                     <ul>
Line 47: Line 48:
     <tr>
     <tr>
         <td>IP address</td>
         <td>IP address</td>
         <td>Router's WAN IP address</td>
         <td>Router's WAN IP address.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>WAN MAC</td>
         <td>WAN MAC</td>
         <td>MAC address of the WAN network interface controller (WiFi radio or WAN Ethernet port). This field is only visible if main WAN is set to Wired or WiFi</td>
         <td>MAC address of the WAN network interface controller (WiFi radio or WAN Ethernet port). This field is only visible if main WAN is set to Wired or WiFi.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Netmask</td>
         <td>Netmask</td>
         <td>A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device</td>
         <td>A <b>[[What is a Netmask?|netmask]]</b> is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Gateway</td>
         <td>Gateway</td>
         <td>Gateway of the default route - an IP address through which the router reaches the Internet</td>
         <td>Gateway of the default route - an IP address through which the router reaches the Internet.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>DNS</td>
         <td>DNS</td>
         <td>DNS servers used by the main WAN connection</td>
         <td>DNS servers used by the main WAN connection.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Connected</td>
         <td>Connected</td>
         <td>Currently used WAN connection uptime</td>
         <td>Currently used WAN connection uptime.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Ports</td>
         <td>Ports</td>
         <td>Displays an image of the router's back panel with highlighted Ethernet ports that are currently in use</td>
         <td>Displays an image of the router's front panel with highlighted Ethernet ports that are currently in use.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>WAN Failover Status</td>
         <td>WAN Failover Status</td>
         <td>Displays the router's current WAN failover status</td>
         <td>Displays the router's current WAN failover status.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Refresh</td>
         <td>Refresh</td>
         <td>Refreshes all information fields in the page</td>
         <td>Refreshes all information fields in the page.</td>
     </tr>
     </tr>
</table>
</table>


WAN settings can be customized via the <b>Network → [[{{{name}}} WAN|WAN]]</b> page.
WAN settings can be customized via the <b>Network → [[{{{name}}} WAN|WAN]]</b> page.

Latest revision as of 13:19, 22 October 2020

WAN

The WAN section displays information about the Main and Backup WAN connections. The figure below is an example of the Mobile page:

[[File:{{{file_wan}}}]]

Field Description
Interface WAN type. Possible values are:
  • Mobile
  • Wired
  • Wireless
Type [[{{{name}}}_Mobile#Mobile_Configuration|Connection type]] or [[{{{name}}}_WAN#Common_Configuration|protocol]]. The value displayed in this field is dependent on used WAN type. Possible values are:
  • Mobile WAN
    • Qmi2 - Qualcomm MSM Interface, a proprietary protocol used between Qualcomm cellular processors and their software stacks
    • PPP - Point-to-Point Protocol; uses a dialling number to establish a data connection
  • Wired WAN
    • DHCP - Dynamic Host Configuration Protocol; the WAN network interface controller acts as a DHCP client, meaning that it receives a dynamically assigned IP address and other network configuration parameters
    • Static - WAN network interface controller configuration parameters are set manually (used when the WAN gateway is not a DHCP server)
    • PPPoE - Point-to-Point Protocol over Ethernet; used to establish a Digital Subscriber Line (DSL) Internet service connection
  • WiFi WAN
    • DHCP - Dynamic Host Configuration Protocol; the WAN network interface controller acts as a DHCP client, meaning that it receives a dynamically assigned IP address and other network configuration parameters
    • Static - WAN network interface controller configuration parameters are set manually (used when the WAN gateway is not a DHCP server)
IP address Router's WAN IP address.
WAN MAC MAC address of the WAN network interface controller (WiFi radio or WAN Ethernet port). This field is only visible if main WAN is set to Wired or WiFi.
Netmask A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device.
Gateway Gateway of the default route - an IP address through which the router reaches the Internet.
DNS DNS servers used by the main WAN connection.
Connected Currently used WAN connection uptime.
Ports Displays an image of the router's front panel with highlighted Ethernet ports that are currently in use.
WAN Failover Status Displays the router's current WAN failover status.
Refresh Refreshes all information fields in the page.

WAN settings can be customized via the Network → [[{{{name}}} WAN|WAN]] page.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut2xx_manual_network_wan&oldid=73854"