Template:Networking rut manual services: Difference between revisions

Latest revision as of 11:11, 24 October 2023

The information in this page is updated in accordance with firmware version .

Summary

The Services page is used for easy service management. From here you can monitor your device's services states. Click a button to access respective section where it was originally configured.

This chapter of the user manual provides an overview of the Services page for {{{name}}} devices.

Services

The Services page displays the status of most of the device's services. Services that are currently inactive are displayed in a red font, while active ones are highlighted in green.

The figure below is an example of the Services page:

[[File:Networking_{{{name}}}_manual_services.png|border|class=tlt-border]]

Click the zone next to a service where it says "Change settings" and you will redirected to configuration page.

Additional notes:

By default, only [[{{{name}}} NTP|NTP]] and [[{{{name}}} SMS Utilities|SMS Utilities]] services are enabled
Some services have to be installed via [[{{{name}}} Package Manager|Package Manager]], before they can be visible.

[[Category:{{{name}}} Status section]]

@@ Line 1: / Line 1: @@
+{{Template: Networking_device_manual_fw_disclosure
+| series = {{{series}}}
+| name   = {{{name}}}
+| fw_version ={{Template: Networking_device_manual_latest_fw
+ | series = {{{series}}}
+ | name   = {{{name}}}
+ }}
+}}
 __TOC__
 ==Summary==
-The <b>Services</b> page is used for easy service management. From here you can turn most of your device's services ON or OFF or restart them, without navigating to the respective section where it was originally configured.
+The <b>Services</b> page is used for easy service management. From here you can monitor your device's services states. Click a button to access respective section where it was originally configured.
+This chapter of the user manual provides an overview of the Services page for {{{name}}} devices.
 ==Services==
-The Services table displays the status of most of the device's services. Services that are currently inactive are displayed in a grey font, while active ones are highlighted in blue.
+The <b>Services</b> page displays the status of most of the device's services. Services that are currently inactive are displayed in a red font, while active ones are highlighted in green.
 The figure below is an example of the Services page:
-[[File:{{{file_services}}}]]
+[[File:Networking_{{lc:{{{name}}}}}_manual_services.png|border|class=tlt-border]]
-Click the zone next to a service where it says "Disabled" or "Enabled" to turn that service ON or OFF. Click "Restart" to restart a service.
+Click the zone next to a service where it says "Change settings" and you will redirected to configuration page.
 <b>Additional notes</b>:
 <ul>
-    <li>Some services have to be configured before they can be enabled from this page. If you don't know where or how you can configure a certain service, try checking out the [[{{{name}}} Services section]] for guidance</li>
+     <li>By default, only [[{{{name}}} NTP|NTP]] and [[{{{name}}} SMS Utilities|SMS Utilities]] services are enabled</li>{{#ifeq: {{{name}}} | RUT850 ||
-     <li>By default, only [[{{{name}}} NTP|NTP]] and [[{{{name}}} SMS Utilities|SMS Utilities]] services are enabled</li>
+     <li>Some services have to be installed via [[{{{name}}} Package Manager|Package Manager]], before they can be visible.</li>}}
-     <li>Restarting a service that is disabled does nothing</li>
 </ul>
-[[Category:{{{name}}} WebUI]]
+[[Category:{{{name}}} Status section]]