RUT230 User Scripts: Difference between revisions
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
{{Template: | {{Template: Networking_rut_manual_user_scripts | ||
| name | <!------------------------DEVICE-----------------------> | ||
| | | name = RUT230 | ||
| series = RUT2XX | |||
}} | }} | ||
Latest revision as of 13:24, 20 November 2020
Main Page > EOL Products > RUT230 > RUT230 Manual > RUT230 WebUI > RUT230 System section > RUT230 User ScriptsThe information in this page is updated in accordance with firmware version RUT2XX_R_00.01.14.7.
Notice: This device has entered it's EOL (End of Life) cycle. For more information, visit our EOL policy here. Temporarily, some content in this page might not match features found in firmware listed above.
Summary
The User Scripts function allows users to write their own shell scripts that will be executed during the router's booting process.
This chapter of the user manual provides an overview of the User Scripts page for RUT230 devices.
Startup script management
The startup script management section shows the contents of the /etc/rc.local file and allows the user to edit it. Scripts written in this file are executed at the end of the device's start up process. You can also execute written scripts via a command line interface with the following command:
sh /etc/rc.local
The figure below is an example of the startup script management section:
