Jump to content
  • EN

Template:Networking rutos manual leds: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
Created page with "This page contains information the different types of LEDs and their behaviour on a {{{name}}} router. ==Power LED== The <b>power LED</b> is located on the bottom left corne..."
 
No edit summary
 
(118 intermediate revisions by 7 users not shown)
Line 1: Line 1:
This page contains information the different types of LEDs and their behaviour on a {{{name}}} router.
This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.
__TOC__
==Power LED==
{{#switch: {{{series}}} | OTD140 | OTD500 =  The <b>power LED's</b> are located on the each Ethernet ports (POE In/POE Out). Green PD (Power Device) LED shines when power is supplied to device '''PoE In''' port. Green PSE (Power Sourcing Equipment) activity LED shines when PD device is connected to '''PoE Out''' port.
| RUTE = {{#ifeq: {{{name}}} | OTD144 | The <b>power LED's</b> are located on the each Ethernet ports (POE In/POE Out). Green PD (Power Device) LED shines when power is supplied to device '''PoE In''' port. Green PSE (Power Sourcing Equipment) activity LED shines when PD device is connected to '''PoE Out''' port.|}}
| #default = The <b>power LED</b> is located on the bottom left corner of the front panel{{#switch: {{{series}}}|DAP14X|RUT14X=.|#default=, just under the power connector.}}}}
 
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_power_led.png|500px]]
 
It indicates whether the device is powered on or not.
{{#switch: {{{name}}} | OTD140 | OTD500 | OTD144 = | #default =
<table class="nd-othertables_3">
    <tr>
        <th width=500>State</th>
        <th width=500>Description</th>
    </tr>{{#ifeq: {{{power_leds}}} | 1 |
    <tr>
        <td>LED turned on</td>
        <td>Device is powered on.</td>
    </tr>
    <tr>
        <td>LED turned off</td>
        <td>Device is not powered on.</td>
    </tr>|
    <tr>
        <td>M LED turned on</td>
        <td>Device is powered over the Main power connector.</td>
    </tr>
    <tr>
        <td>M LED turned off</td>
        <td>Device is not powered over the Main power connector.</td>
    </tr>
    <tr>
        <td>R LED turned on</td>
        <td>Device is powered over the Reserve power connector.</td>
    </tr>
    <tr>
        <td>R LED turned off</td>
        <td>Device is not powered over the Reserve power connector.</td>
    </tr>}}
</table>}}{{#ifeq: {{{wifi}}} | 1 | <h2>WiFi band LEDs</h2>


==Power LED==
The <b>WiFi band LEDs</b> are located at the bottom of the front panel of the device, to the left of the Ethernet ports.
 
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_wifi_leds.png|500px]]
 
They display whether a WiFi Access Point (AP) is active on a specific band.
 
<table class="nd-othertables_3">
    <tr>
        <th width=500>State</th>
        <th width=500>Description</th>
    </tr>
    <tr>
        <td>2.4 LED turned on.</td>
        <td>At least one 2.4 GHz Access Point is running.</td>
    </tr>
    <tr>
        <td>2.4 LED turned off</td>
        <td>No 2.4 GHz Access Points are running.</td>
    </tr>
    <tr>
        <td>5 LED turned on</td>
        <td>At least one 5 GHz Access Point is running.</td>
    </tr>
    <tr>
        <td>5 LED turned off</td>
        <td>No 5 GHz Access Points are running.</td>
    </tr>
</table>|}}{{#ifeq: {{{wan}}} | 1 | <h2>WAN type LEDs</h2>


The <b>power LED</b> is located on the bottom left corner of the front panel, just under the power connector.
The <b>WAN type LEDs</b> are located at the top-right of the front panel.


[[File:{{{file_power}}}]]
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_wan_leds.png|500px]]


It can perform two different actions:
They indicate which type of Internet connection is currently active.


<table class="nd-othertables_3">
<table class="nd-othertables_3">
     <tr>
     <tr>
         <th width=500>Action</th>
         <th width=500>State</th>
         <th width=500>Description</th>
         <th width=500>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>LED turned on</td>
         <td>SIM1 LED on</td>
         <td>Router is powered up</td>
         <td>A mobile data connection on SIM1 is active.</td>
    </tr>
    <tr>
        <td>SIM1 LED off</td>
        <td>A mobile data connection on SIM1 is inactive.</td>
    </tr>
    <tr>
        <td>SIM2 LED on</td>
        <td>A mobile data connection on SIM2 is active.</td>
    </tr>
    <tr>
        <td>SIM2 LED off</td>
        <td>A mobile data connection on SIM2 is inactive.</td>
    </tr>{{#ifeq: {{{wifi}}} | 1 |
    <tr>
        <td>WiFi LED on</td>
        <td>A WiFi data connection (WiFi WAN) is active.</td>
    </tr>
    <tr>
        <td>WiFi LED off</td>
        <td>A WiFi data connection (WiFi WAN) is inactive.</td>
    </tr>|}}
    <tr>
        <td>ETH LED on</td>
        <td>An Ethernet data connection (wired WAN) is active.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>LED turned off</td>
         <td>ETH LED off</td>
         <td>Router is not powered up</td>
         <td>An Ethernet data connection (wired WAN) is inactive.</td>
     </tr>
     </tr>
</table>
</table>
|}}{{#ifeq: {{{eth}}} | 1 | <h2>Ethernet port LEDs</h2>


==WiFi band LEDs==
{{#switch: {{{eth_leds}}}
| 1 = The <b>Ethernet port LEDs</b> are located on the device's front panel, under each respective Ethernet port.


[[File:{{{file_wifi}}}]]
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png|500px]]


<table class="nd-othertables_3">
<table class="nd-othertables_3">
     <tr>
     <tr>
         <th width=500>Action</th>
         <th width=500>State</th>
         <th width=500>Description</th>
         <th width=500>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td>LED on</td>
         <td></td>
         <td>Operating as a 10/100 Mbps connection.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td>LED off</td>
         <td></td>
         <td>No link established.</td>
     </tr>
     </tr>
    <tr>
        <td>LED blinking</td>
        <td>Connection established and there is activity on this port (data being transferred).</td>
    </tr><!--
    <tr>
        <td>LEDs turn on and off in sequence on after the other</td>
        <td>The device is in the Bootloader menu state.</td>
    </tr>-->
</table>
</table>
| 2 = There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>.
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png|500px]]
They provide information on the current states of the Ethernet ports. Each port has two LEDs:


==WAN type LEDs==
<ul>
    <li><span style="color: orange;"><b>Orange</b></span> - 10{{#switch: {{{name}}} | OTD140 | OTD144 | OTD500 = /1000 Mbps connection | #default = /100 Mbps connection}}</li>
    <li><span style="color: green;"><b>Green</b></span> {{#switch: {{{series}}} | #default = - 1000 Mbps connection | OTD140 | OTD500 = - power LED | RUTE = {{#ifeq: {{{name}}} | OTD144 | - power LED |}} |TRB501 = - 2.5 Gbps connection}}</li>
</ul>


[[File:{{{file_wan}}}]]
Below is an explanation on the behaviours of green and orange LEDs.


<table class="nd-othertables_3">
<table class="nd-othertables_3">
     <tr>
     <tr>
         <th width=500>Action</th>
         <th width=500>State</th>
         <th width=500>Description</th>
         <th width=500>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td>{{#switch: {{{name}}} | #default = LED on | OTD140 | OTD144 | OTD500 =  Yellow LED on}}</td>
         <td></td>
         <td>A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred).</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td>{{#switch: {{{name}}} | #default = LED off | OTD140 | OTD144 | OTD500 =  Yellow LED off}}</td>
         <td></td>
         <td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card).</td>
     </tr>
     </tr>
    <tr>
        <td>{{#switch: {{{name}}} | #default = LED blinking | OTD140 | OTD144 | OTD500 =  Yellow LED blinking}}</td>
        <td>Connection established and data is being transferred over this port.</td>
    </tr>{{#switch: {{{name}}} | #default = | OTD140 | OTD144 | OTD500 =
    <tr>
        <td>Green LED on</td>
        <td>Power ON.</td>
    </tr>
    <tr>
        <td>Green LED off</td>
        <td>Power OFF.</td>
    </tr>
    <tr>
        <td>Green LED blinking</td>
        <td>Power supply/device being disrupted or not stable.</td>
    </tr>}}
</table>
</table>
| 3= There is one <b>LEDs</b> located at the top-left of each <b>Ethernet port</b> (top-right green port is unused).
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png|500px]]


==Ethernet port LEDs==
They provide information on the current states of the Ethernet ports. Each port has one LED:


There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>.
<ul>
    <li><span style="color: orange;"><b>Orange</b></span> - 10/100 Mbps connection</li>
</ul>


[[File:{{{file_ethernet}}}]]
Below is an explanation on the behaviours of orange LEDs.


<table class="nd-othertables_3">
<table class="nd-othertables_3">
     <tr>
     <tr>
         <th width=500>Action</th>
         <th width=500>State</th>
         <th width=500>Description</th>
         <th width=500>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td>LED on</td>
         <td></td>
         <td>A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred).</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td>LED off</td>
         <td></td>
         <td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)).</td>
    </tr>
    <tr>
        <td>LED blinking</td>
        <td>Connection established and data is being transferred over this port.</td>
     </tr>
     </tr>
</table>
</table>
}}|}}{{#ifeq: {{{mobile}}} | 1 | <h2>Mobile network type LEDs</h2>
{{#switch: {{{name}}} | TRB256 =
The <b>mobile network type LEDs</b> are located on left side of the back panel:


{{Template: rut_ethernet_port_led_table}}
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]


<span class="asterisk">*</span> The <b>bootloader menu</b> is a special router state from which certain upgrades can be performed. For more information on the bootloader menu, click [[Bootloader menu|here]]
They display which type of Internet connection is currently active.


==Mobile network type LEDs==
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>2G, NB and M1 LEDs are blinking at the same time</td>
        <td>No SIM or bad PIN</td>
    </tr>
    <tr>
        <td>2G, NB and M1 LEDs light up and down in sequence</td>
        <td>Searching mobile network operator</td>
    </tr>
    <tr>
        <td>2G/NB/M1 LED blinking</td>
        <td>Gateway connected to 2G/NB/M1, no data session established</td>
    </tr>
    <tr>
        <td>2G/NB/M1 LED turned ON</td>
        <td>Gateway connected to 2G/NB/M1 with data session</td>
    </tr>
    <tr>
        <td>2G/NB/M1 LED blinking</td>
        <td>Gateway connected to 2G/NB/M1 and data is being transferred</td>
    </tr>
</table>
| RUTM30 | RUTM31 =
The <b>mobile network type LED</b> is located on left side of the front panel:
 
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
 
Indicates that the device has an Internet connection.
 
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>Yellow lit and blinking on data</td>
        <td>Device is connected to a 3G.</td>
    </tr>
    <tr>
        <td>Yellow blinks every 1s</td>
        <td>Establishing data connection 3G.</td>
    </tr>
    <tr>
        <td>Green lit and blinking on data</td>
        <td>Device is connected to a 4G.</td>
    </tr>
    <tr>
        <td>Green blinks every 1s</td>
        <td>Establishing data connection 4G.</td>
    </tr>
    <tr>
        <td>Blue lit and blinking on data</td>
        <td>Device is connected to a 5G.</td>
    </tr>
    <tr>
        <td>Blue blinks every 1s</td>
        <td>Establishing data connection 5G.</td>
    </tr>
    <tr>
        <td>Blinking: red -> green -> blue</td>
        <td>No SIM inserted.</td>
    </tr>
    <tr>
        <td>Blinking: yellow -> green -> blue</td>
        <td>The device is attempting to connect to a mobile network operator.</td>
    </tr>
</table>
 
| TRM500 =
The <b>mobile network type LED</b> is located on right side of the back panel:
 
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
 
Indicates that the device has an Internet connection.
 
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>Flicker slowly (200 ms High/1800 ms Low)</td>
        <td>Network searching.</td>
    </tr>
    <tr>
        <td>Flicker slowly (1800 ms High/200 ms Low)</td>
        <td>Idle.</td>
    </tr>
    <tr>
        <td>Flicker quickly (125 ms High/125 ms Low)</td>
        <td>Data transfer is ongoing.</td>
    </tr>
    <tr>
        <td>Always ON</td>
        <td>Voice calling.</td>
    </tr>
    <tr>
        <td>Always OFF</td>
        <td>Minimum functionality mode.</td>
    </tr>
</table>
 
The <b>5G LED</b> is located on right side of the back panel:
 
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_5G.png|500px]]
 
Indicates that the device is connected to a 5G network.
 
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>On</td>
        <td>Device is registered to a network.</td>
    </tr>
    <tr>
        <td>Off</td>
        <td>Device is not registered to a network.</td>
    </tr>
</table>
| TRM200 =  
The <b>mobile network type LED</b> is located on right side of the front panel:


The <b>mobile network type LEDs</b> are located just above the first SIM holder.
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]


[[File:{{{file_net_type}}}]]
Indicates that the device has an Internet connection.


<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>Flicker slowly (100 ms High/800 ms Low)</td>
        <td>Network searching.</td>
    </tr>
    <tr>
        <td>Flicker slowly (100 ms High/1800 ms Low)</td>
        <td>Network registered.</td>
    </tr>
    <tr>
        <td>Flicker quickly (100 ms High/300 ms Low)</td>
        <td>Data transfer is ongoing.</td>
    </tr>
    <tr>
        <td>Always ON</td>
        <td>Others.</td>
    </tr>
    <tr>
        <td>Always OFF</td>
        <td>Flight mode, no service, shutdown.</td>
    </tr>
</table>
The <b>LTE LED</b> is located on right side of the front panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_lte.png|500px]]
Indicates that the device is connected to a 4G network.
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>On</td>
        <td>When the device is connected to a LTE network.</td>
    </tr>
    <tr>
        <td>Off</td>
        <td>When connected to other networks (WCDMA, EDGE).</td>
    </tr>
</table>
| TRM142 =
The <b>mobile network type LED</b> is located on right side of the back panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
Indicates that the device has an Internet connection.
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>Flicker slowly (200 ms ON/1800 ms OFF)</td>
        <td>Network searching.</td>
    </tr>
    <tr>
        <td>Flicker slowly (1800 ms ON/200 ms OFF)</td>
        <td>Idle.</td>
    </tr>
    <tr>
        <td>Flicker quickly (125 ms ON/125 ms OFF)</td>
        <td>Data transfer is ongoing.</td>
    </tr>
    <tr>
        <td>Always ON</td>
        <td>Voice calling.</td>
    </tr>
    <tr>
        <td>Always OFF</td>
        <td>Flight mode, no service, shutdown.</td>
    </tr>
</table>
The <b>LTE LED</b> is located on right side of the back panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_lte.png|500px]]
Indicates that the device is connected to a 4G network.
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Action</th>
        <th style="width: 550px>Description</th>
    </tr>
    <tr>
        <td>On</td>
        <td>When the device is connected to a LTE network.</td>
    </tr>
    <tr>
        <td>Off</td>
        <td>When connected to other networks (WCDMA, EDGE).</td>
    </tr>
</table>
| #default =
{{#switch: {{{series}}} | TRB1 =
The <b>mobile network type LEDs</b> are located on right side of the back panel:
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
They display which type of Internet connection is currently active.
| TRB2M =
The <b>mobile network type LEDs</b> are located on left side of the back panel.
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
They display which type of Internet connection is currently active.
| RUT9M =
The <b>mobile network type LED</b> is located on the bottom right corner of the front panel, near signal strength indication LEDs.
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
The LED displays the router's current connection state and network type among a few other things.
| #default =
The <b>mobile network type LEDs</b> are located near the SIM card slot.
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png|500px]]
They display which type of Internet connection is currently active.}}
{{#switch: {{{series}}} | RUT9M =
<table class="nd-othertables_3">
<table class="nd-othertables_3">
     <tr>
     <tr>
Line 99: Line 495:
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td><span style="color:green">Green</span> and <span style="color:red">red</span> blinking alternatively ever 500 ms </td>
         <td></td>
         <td>No SIM or bad PIN.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td><span style="color:green">Green</span>, <span style="color:red">red</span> and <span style="color:orange">orange</span> blinking alternatively every 500 ms</td>
         <td></td>
        <td>Connecting to GSM.</td>
    </tr>{{#switch: {{{name}}}| #default =
    <tr>
        <td><span style="color:red">Red</span> blinking every 1 sec</td>
        <td>Connected 2G, no data session established.</td>
    </tr>| RUT976 =}}
    <tr>
        <td><span style="color:orange">Orange</span> blinking every 1 sec</td>
        <td>Connected {{#switch: {{{name}}}| #default = 3G | RUT976 = 4G}}, no data session established.</td>
    </tr>
    <tr>
        <td><span style="color:green">Green</span> blinking every 1 sec</td>
        <td>Connected {{#switch: {{{name}}}| #default = 4G | RUT976 = 5G}}, no data session established.</td>
    </tr>{{#switch: {{{name}}}| #default =
    <tr>
        <td><span style="color:red">Red</span> lit and blinking rapidly while data is being transferred </td>
        <td>Connected 2G with data session.</td>
    </tr>| RUT976 =}}
    <tr>
        <td><span style="color:orange">Orange</span> lit and blinking rapidly while data is being transferred </td>
        <td>Connected {{#switch: {{{name}}}| #default = 3G | RUT976 = 4G}} with data session.</td>
    </tr>
    <tr>
        <td><span style="color:green">Green</span> lit and blinking rapidly while data is being transferred </td>
         <td>Connected {{#switch: {{{name}}}| #default = 4G | RUT976 = 5G}} with data session.</td>
     </tr>
     </tr>
</table>
</table>
| #default =
<table class="nd-othertables_3">
    <tr>
        <th width=500>Action</th>
        <th width=500>Description</th>
    </tr>{{#ifeq: {{{2g}}} | 1 |
    <tr>
        <td>2G LED turned on</td>
        <td>Device is connected to a 2G network.</td>
    </tr>|}}{{#ifeq: {{{3g}}} | 0 ||
    <tr>
        <td>3G LED turned on</td>
        <td>Device is connected to a 3G network.</td>
    </tr>}}
    <tr>
        <td>4G LED turned on</td>
        <td>Device is connected to a 4G network.</td>
    </tr>{{#ifeq: {{{5g}}} | 1 |
    <tr>
        <td>5G LED turned on</td>
        <td>Device is connected to a 5G network using 5G SA.</td>
    </tr>{{#switch: {{{name}}} | RUT271 | RUT276 = | #default =
    <tr>
        <td>4G and 5G LEDs turned on</td>
        <td>Device is connected using 5G NSA.</td>
    </tr>}}|}}{{#ifeq: {{{2g}}} | 1 |
    <tr>
        <td>2G blinking</td>
        <td>Device is connected to a 2G network but hasn't received an IP address.</td>
    </tr>
    <tr>
        <td>2G blinking rapidly</td>
        <td>Device is connected to a 2G network and data is being transferred.</td>
    </tr>|}}{{#ifeq: {{{3g}}} | 0 ||
    <tr>
        <td>3G blinking</td>
        <td>Device is connected to a 3G network but hasn't received an IP address.</td>
    </tr>
    <tr>
        <td>3G blinking rapidly</td>
        <td>Device is connected to a 3G network and data is being transferred.</td>
    </tr>}}
    <tr>
        <td>4G blinking</td>
        <td>Device is connected to a 4G network but hasn't received an IP address.</td>
    </tr>
    <tr>
        <td>4G blinking rapidly</td>
        <td>Device is connected to a 4G network and data is being transferred.</td>
    </tr>{{#ifeq: {{{5g}}} | 1 |
    <tr>
        <td>5G blinking</td>
        <td>Device is connected to a 5G SA network but hasn't received an IP address.</td>
    </tr>
    <tr>
        <td>5G blinking rapidly</td>
        <td>Device is connected to a 5G SA network and data is being transferred.</td>
    </tr>{{#switch: {{{name}}} | RUT271 | RUT276= | #default =
    <tr>
        <td>4G and 5G blinking</td>
        <td>Device is connected to a 5G NSA network but hasn't received an IP address.</td>
    </tr>
    <tr>
        <td>4G and 5G blinking rapidly</td>
        <td>Device is connected to a 5G NSA network and data is being transferred.</td>
    </tr>}}|}}
    <tr>
        <td>All LEDs blinking at the same time every 500 ms</td>
        <td>No SIM card or incorrect PIN.</td>
    </tr>
    <tr>
        <td>All LEDs turn on and off in a sequence one after the other</td>
        <td>The device is attempting to connect to a mobile network operator.</td>
    </tr>
</table>}}}}
{{#switch: {{{name}}} | TRM500 | TRM200 | TRM142 = | #default =
<h2>Mobile signal strength indication LEDs</h2>
{{#switch: {{{series}}} | TRB2M =
The <b>mobile signal strength indication LEDs</b> are located on right side of the back panel.
| TRB1 =
The <b>mobile signal strength indication LEDs</b> are located on right side of the back panel.
| RUT9M =
The <b>mobile signal strength indication LEDs</b> are located on the bottom right corner of the front panel, to the right of the connection status LED.
| #default = {{#switch: {{{name}}} | RUTM30 | RUTM31 =
The <b>mobile signal strength indication LED</b> is located on left side of the front panel.


{{Template: rut9xx_connection_status_led_table
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_signal_strength_leds.png|500px]]
| 4g = 1
 
}}
The color of lit up LED represents a different mobile signal strength ([[RSSI]]) value in dBm.
<table class="nd-othertables_3">
    <tr>
        <th style="width: 500px>Color of lit up LED</th>
        <th style="width: 500px>Signal strength value</th>
    </tr>
    <tr>
        <td>Red blinking</td>
        <td>≤-110 dBm</td>
    </tr>
    <tr>
        <td>Red lit</td>
        <td>-110 dBm to -82 dBm</td>
    </tr>
    <tr>
        <td>Yellow lit</td>
        <td>-81 dBm to -52 dBm</td>
    </tr>
    <tr>
        <td>Green lit</td>
        <td>≥ -51 dBm</td>
    </tr>
</table>


==Mobile signal strength indication LEDs==
| #default = The <b>mobile signal strength indication LEDs</b> are located near the SIM card slot.}}}}


The <b>mobile signal strength indication LEDs</b> are located just above the second SIM holder.
{{#switch: {{{name}}} | RUTM30 | RUTM31 = | #default =


[[File:{{{file_signal}}}]]
[[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_signal_strength_leds.png|500px]]


The number of lit up LEDs represents a different mobile signal strength ([[RSSI]]) value in dBm.
{{#ifeq: {{{mobile_leds}}} | 3 |
<table class="nd-othertables_3">
<table class="nd-othertables_3">
     <tr>
     <tr>
         <th width=500>Action</th>
        <th style="width: 500px>No. of lit up LEDs</th>
         <th width=500>Description</th>
        <th style="width: 500px>Signal strength value</th>
    </tr>
    <tr>
        <td>0</td>
        <td>≤ -111 dBm </td>
    </tr>
    <tr>
        <td>1</td>
        <td>-110 dBm to -82 dBm</td>
    </tr>
    <tr>
        <td>2</td>
        <td>-81 dBm to -52 dBm</td>
    </tr>
    <tr>
        <td>3</td>
        <td>≥ -51 dBm</td>
    </tr>
</table>
|<table class="nd-othertables_3">
    <tr>
         <th width=500>No. of lit up LEDS</th>
         <th width=500>Signal strength</th>
    </tr>
    <tr>
        <td>0</td>
        <td>≤ -111 dBm</td>
    </tr>
    <tr>
        <td>1</td>
        <td>-110 dBm to -97 dBm</td>
    </tr>
    <tr>
        <td>2</td>
        <td>-96 dBm to -82 dBm</td>
    </tr>
    <tr>
        <td>3</td>
        <td>-81 dBm -67 dBm</td>
    </tr>
    <tr>
        <td>4</td>
        <td>-66 dBm to -52 dBm</td>
    </tr>
    <tr>
        <td>5</td>
        <td>≥ -51 dBm</td>
    </tr>
</table>
}}}}
{{#switch: {{{name}}} | RUTM30 | RUTM31 =
The Mobile signal strength LED and Mobile network type LED behavior in bootloader and recovery modes:
 
<table class="nd-othertables_2">   
    <tr>
        <th style="width: 550px>Mode</th>
        <th style="width: 550px>Behavior</th>
    </tr>
    <tr>
        <td>Bootloader</td>
        <td><li>Mobile signal strength LED</li> - led shines in green.
            <li>Network type LED</li> - led shines in green.
        </td>
    </tr>
    <tr>
        <td>Recovery</td>
        <td><li>Mobile signal strength LED</li> - led blinking in green.
            <li>Network type LED</li> - led blinking in green.
        </td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td>Booting device</td>
         <td></td>
         <td><li>Mobile signal strength LED</li> - led blinking in blue.
        </td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td></td>
         <td>Flashing FW</td>
         <td></td>
         <td><li>Mobile signal strength LED</li> - fast blinking: red -> green -> blue.
        </td>
     </tr>
     </tr>
</table>
</table>
| #default =
The Mobile signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. When you press and hold the reset button, if there is a User's default configuration configured on the device, you have to hold it pressed for 6 seconds (by default) to initiate a <b>User's default configuration reset</b> and 12 seconds (by default) to initiate a <b>Factory reset</b>. Otherwise, it is only necessary to hold the reset button for 6 seconds to trigger a <b>Factory reset</b>. If the button was held down longer than 20 seconds (by default) no action will be taken.
While holding the reset button each lit up signal strength LED indicate that a period of two seconds has passed. In case with <b>{{{name}}}</b>, when all {{#switch: {{{name}}} | RUTX12 | RUTM52 | RUTM56 = {{#expr: {{{mobile_leds}}} * 2}} | #default = {{{mobile_leds}}}}} Mobile signal strength LEDs are lit up, they represent that {{#switch: {{{name}}} | RUTX12 | RUTM52 | RUTM56 = {{#expr: {{{mobile_leds}}} * 4}} | #default = {{#expr: {{{mobile_leds}}} * 2}}}} (LED number multiplied by 2) seconds have passed since you pressed down on the reset button.


{{signal strength leds table}}
After releasing the button at one of the reset periods, all {{#switch: {{{name}}} | RUTX12 | RUTM52 | RUTM56 = {{#expr: {{{mobile_leds}}} * 2}} | #default = {{{mobile_leds}}}}} LEDs will start blinking every 1 second. This signifies that the router <b>has begun the reset</b>.}}
}}|}}


[[Category:{{{name}}} Manual]]
[[Category:{{{name}}} Manual]]

Latest revision as of 15:18, 2 December 2025

This page contains information the different types of LEDs and their behaviour on a {{{name}}} device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

[[File:Networking_{{{name}}}_manual_leds_power_led.png|500px]]

It indicates whether the device is powered on or not.

State Description
M LED turned on Device is powered over the Main power connector.
M LED turned off Device is not powered over the Main power connector.
R LED turned on Device is powered over the Reserve power connector.
R LED turned off Device is not powered over the Reserve power connector.

[[Category:{{{name}}} Manual]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_leds&oldid=162109"