Template:Networking rutos manual snmp: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
 
(87 intermediate revisions by 10 users not shown)
Line 1: Line 1:
<!-- Template uses {{{name}}}, {{{series}}}, and if device doesnt have mobile then {{{mobile}}} = 0-->
<!-- Template uses {{{name}}}, {{{series}}}, {{{mobile}}} (0), {{{gps}}} (1), {{{wireless}}} (1), {{eth}} (1) -->
{{Template:Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05
| series = {{{series}}}
| series     = {{{series}}}
| name  = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| name  = {{{name}}}
}}
}}
}}
 
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} SNMP (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} SNMP (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
==Summary==
==Summary==


<b>Simple Network Management Protocol (SNMP)</b> is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices.
<b>Simple Network Management Protocol (SNMP)</b> is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices.
{{#switch: {{{series}}} | RUTX|TRB1|TRB5|RUTM=|#default=
<u><b>
Note:</b> SNMP is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
}}


{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
Line 19: Line 29:
===SNMP agent settings===
===SNMP agent settings===
----
----
[[File:Networking_rutos_manual_snmp_snmp_agent_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_snmp_snmp_agent_settings_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 38: Line 48:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Protocol</td>
         <td>IP type</td>
         <td>UDP | TCP; default: '''UDP'''</td>
         <td>IPv4 | IPv6 | IPv4v6; default: '''IPv4'''</td>
         <td>SNMP service's protocol.</td>
         <td>IP type used by SNMP.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 181: Line 191:
The <b>SNMP Community</b> section is used to manage access rights. You can edit an SNMP community by clicking the 'Edit' button next to it:
The <b>SNMP Community</b> section is used to manage access rights. You can edit an SNMP community by clicking the 'Edit' button next to it:


[[File:Networking_rutos_manual_snmp_communities_edit_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_snmp_communities_edit_button_v1.png|border|class=tlt-border]]


This will redirect you to the community's configuration page.
This will redirect you to the community's configuration page.
Line 207: Line 217:
         <td>ip; default: <b>none</b></td>
         <td>ip; default: <b>none</b></td>
         <td>Netmask for IP of the community.</td>
         <td>Netmask for IP of the community.</td>
    </tr>
    <tr>
        <td>Access Mode</td>
        <td>Read-Only | Read-Write; default: <b>Read-Only</b></td>
        <td>Access mode for current community.</td>
    </tr>
</table>
SNMPv6 community configuration page:
[[File:Networking_rutos_manual_snmp_communities_snmpv6_community_configuration_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Community name</td>
        <td>string; default: <b>public</b></td>
        <td>Name of the community.</td>
    </tr>
    <tr>
        <td>Source</td>
        <td>ip6 | domain name; default: <b>default</b></td>
        <td>Source of the community.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 261: Line 298:
     <tr>
     <tr>
         <td>off/on slider</td>
         <td>off/on slider</td>
         <td>off | on; default: <b>on</b></td>
         <td>off | on; default: <b>off</b></td>
         <td>Turns the host on or off. SNMP traffic is only sent to enabled hosts.</td>
         <td>Turns the host on or off. SNMP traffic is only sent to enabled hosts.</td>
     </tr>
     </tr>
Line 273: Line 310:


[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_add_button.png|border|class=tlt-border]]
You can then edit the trap rule by clicking the 'Edit' button next to it.
[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_edit_button.png|border|class=tlt-border]]


You should be redirected to the rule's configuration page which should look something like this:
You should be redirected to the rule's configuration page which should look something like this:
Line 286: Line 319:
To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.
To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.


{{#ifeq: {{{mobile}}} | 1 |
====Signal strength====
====Signal strength====
----
----
Line 296: Line 331:
     <tr>
     <tr>
         <td>Enable</td>
         <td>Enable</td>
         <td>off | on; default: <b>on</b></td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>Enable or disable this rule.</td>
         <td>Enable or disable this rule.</td>
     </tr>
     </tr>
Line 321: Line 356:
     <tr>
     <tr>
         <td>Enable</td>
         <td>Enable</td>
         <td>off | on; default: <b>on</b></td>
         <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
         <td>Enable or disable this rule.</td>
         <td>Enable or disable this rule.</td>
     </tr>
     </tr>
Line 330: Line 365:
         <td>Rule will be triggered when connection type will change.</td>
         <td>Rule will be triggered when connection type will change.</td>
     </tr>
     </tr>
</table>
</table>|}}
<br>
 
{{#ifeq: {{{io}}} | 1 |
====Input/Output====
====Input/Output====
----
----
Line 337: Line 373:
     <tr>
     <tr>
         <th>field name</th>
         <th>field name</th>
         <th>value</th>
         <th>value1</th>
         <th>description</th>
         <th>description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Enable</td>
         <td>Enable</td>
         <td>off | on; default: <b>on</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Enable or disable this rule.</td>
         <td>Enable or disable this rule.</td>
     </tr>
     </tr>
Line 351: Line 387:
     </tr>
     </tr>
{{#switch:{{{series}}}
{{#switch:{{{series}}}
|RUTX =  
|RUTX|RUTM =  
     <tr>
     <tr>
         <td>Input/Output type</td>
         <td>Input/Output type</td>
Line 359: Line 395:
     <tr>
     <tr>
         <td>Input/Output name</td>
         <td>Input/Output name</td>
         <td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td>
         <td>Output(4) {{!}} Input(3); default: <b>Output(4)</b></td>
         <td>Which type of Inputs and Outputs to use in this rule.</td>
         <td>Which type of Inputs and Outputs to use in this rule.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>State change</td>
         <td>State change</td>
         <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
         <td>High level {{!}} Low level {{!}} Both; default: <b>High level</b></td>
         <td>On which Input/Output state will this rule be triggered.</td>
         <td>On which Input/Output state will this rule be triggered.</td>
     </tr>
     </tr>
|TRB2 =
|TRB2|TRB2M =
     <tr>
     <tr>
         <td>Input/Output type</td>
         <td>Input/Output type</td>
Line 380: Line 416:
     <tr>
     <tr>
         <td><span style="color:blue">Input/Output:</span> State change</td>
         <td><span style="color:blue">Input/Output:</span> State change</td>
         <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
         <td>High level {{!}} Low level {{!}} Both; default: <b>Both</b></td>
         <td>On which Input/Output state will this rule be triggered.</td>
         <td>On which Input/Output state will this rule be triggered.</td>
     </tr>
     </tr>
Line 407: Line 443:
         <tr>
         <tr>
             <td><span style="color:blue">Input/Output:</span> State change</td>
             <td><span style="color:blue">Input/Output:</span> State change</td>
             <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
             <td>High level {{!}} Low level {{!}} Both; default: <b>High level</b></td>
             <td>On which Input/Output state will this rule be triggered.</td>
             <td>On which Input/Output state will this rule be triggered.</td>
         </tr>
         </tr>
Line 463: Line 499:
         <tr>
         <tr>
             <td>State change</td>
             <td>State change</td>
             <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
             <td>High level {{!}} Low level {{!}} Both; default: <b>High level</b></td>
            <td>On which Input/Output state will this rule be triggered.</td>
        </tr>}}
|RUT36X =
        <tr>
            <td>Input/Output type</td>
            <td>Input/Output; default: <b>Input/Output</b></td>
            <td>Which type of Inputs and Outputs to use in this rule.</td>
        </tr>
        <tr>
            <td>Input/Output name</td>
            <td>Input(3) {{!}} Output(4); default: <b>Input(3)</b></td>
            <td>Which type of Inputs and Outputs to use in this rule.</td>
        </tr>
        <tr>
            <td>State change</td>
            <td>High level {{!}} Low level {{!}} Both; default: <b>High level</b></td>
            <td>On which Input/Output state will this rule be triggered.</td>
        </tr>
|RUT9 =
    {{#ifeq:{{{name}}}|RUT955|
        <tr>
            <td>Input/Output type</td>
            <td><span style="color:blue">Input/Output</span> {{!}} <span style="color:forestgreen"><b>Relay</b></span> {{!}} <span style="color:darkred"><b>4–20 mA Current Loop</b></span> {{!}} <span style="color:chocolate">ADC</span>; default: <b>Input/Output</b></td>
            <td>Which type of Inputs and Outputs to use in this rule.</td>
        </tr>
        <tr>
            <td><span style="color:blue">Input/Output:</span> Input/Output name</td>
            <td>Input (3) {{!}} Input (1) {{!}} Output(4) {{!}} Isolated Output (3,4,8) {{!}} Isolate Input (2,7); default: <b>Input (3)</b></td>
            <td>Which type of Inputs and Outputs to use in this rule.</td>
        </tr>
        <tr>
            <td><span style="color:blue">Input/Output:</span> State change</td>
            <td>High level {{!}} Low level {{!}} Both; default: <b>Both</b></td>
            <td>On which Input/Output state will this rule be triggered.</td>
        </tr>
        <tr>
            <td><span style="color:forestgreen">Relay:</span> Input/Output name</td>
            <td>Relay(5,10); default: <b>Relay(5,10)</b></td>
            <td>Which type of Inputs and Outputs to use in this rule.</td>
        </tr>
        <tr>
            <td><span style="color:forestgreen">Relay:</span> State change</td>
            <td>Open {{!}} Closed {{!}} Both; default: <b>Open</b></td>
             <td>On which Input/Output state will this rule be triggered.</td>
             <td>On which Input/Output state will this rule be triggered.</td>
         </tr>
         </tr>
|RUT3 =
        <tr>
            <td><span style="color:darkred">4–20 mA Current Loop:</span> Input/Output name</td>
            <td>Analog Current Loop (6,9); default: <b>Analog Current Loop (6,9)</b></td>
            <td>Which type of Inputs and Outputs to use in this rule.</td>
        </tr>
        <tr>
            <td><span style="color:darkred">4–20 mA Current Loop:</span> Voltage</td>
            <td>positive float [0..40]; default: <b>none</b></td>
            <td>At which voltage value will this rule be triggered.</td>
        </tr>
        <tr>
            <td><span style="color:chocolate">ADC:</span> Input/Output name</td>
            <td>Analog Input (6,9); default: <b>Analog Input (6,9)</b></td>
            <td>Which type of Inputs and Outputs to use in this rule.</td>
        </tr>
        <tr>
            <td><span style="color:chocolate">ADC:</span> Voltage</td>
            <td>positive float [0..40]; default: <b>none</b></td>
            <td>At which voltage value will this rule be triggered.</td>
        </tr>
    |
         <tr>
         <tr>
             <td>Input/Output type</td>
             <td>Input/Output type</td>
Line 479: Line 578:
         <tr>
         <tr>
             <td>State change</td>
             <td>State change</td>
             <td>Active {{!}} Inactive {{!}} Both; default: <b>Active</b></td>
             <td>High level {{!}} Low level {{!}} Both; default: <b>Both</b></td>
             <td>On which Input/Output state will this rule be triggered.</td>
             <td>On which Input/Output state will this rule be triggered.</td>
         </tr>
         </tr>}}}}
    |}}
</table>|}}
}}


====Events log====
----
<table class="nd-mantable">
    <tr>
        <th>Event</th>
        <th>Event subtype</th>
        <th>Description</th>
    </tr>
    <tr>
        <td><b>Config change</b></td>
        <td>All | Specific config change; default: <b>all</b></td>
        <td>Informs on changes to the device's configuration.</td>
    </tr>
    <tr>
        <td><b>Reboot</b></td>
        <td>All | From Web UI | From ping reboot | From reboot scheduler | From button{{#ifeq: {{{mobile}}} | 1 | {{!}} From SMS|}}; default: <b>All</b></td>
        <td>Informs on if the device was rebooted.</td>
    </tr>
    <tr>
        <td><b>Startup</b></td>
        <td>Device startup completed</td>
        <td>Informs on when the device is fully booted.</td>
    </tr>{{#ifeq: {{{gps}}} | 1 |
    <tr>
        <td><b>GPS</b></td>
        <td>All {{!}} Entered geofence {{!}} Left geofence; default: <b>All</b></td>
        <td>Informs on when the device has entered or left a user defined geofence zone.</td>
    </tr>|}}{{#ifeq: {{{mobile}}} | 1 |
    <tr>
        <td><b>Mobile data</b></td>
        <td>All {{!}} Connected {{!}} Disconnected; default <b>All</b></td>
        <td>Informs on changes to the state of the device's mobile connection.</td>
    </tr>|}}
    <tr>
        <td><b>New DHCP client</b></td>
        <td>All | Connected from LAN{{#ifeq: {{{wireless}}} | 1 | {{!}} Connected from WiFi|}}; default <b>All</b></td>
        <td>Informs on new DHCP lease give outs.</td>
    </tr>{{#ifeq: {{{eth}}} | 1 |
    <tr>
        <td><b>Ports state</b></td>
        <td>All {{!}} Link speed {{!}} Link state {{!}} Unplugged {{!}} Plugged in {{!}} Specific port; default: <b>All</b></td>
        <td>Informs on Ethernet port state (plugged in or unplugged) or speed (100 Mbps or 1000 Mbps) changes.</td>
    </tr>|}}
    <tr>
        <td><b>Reboot</b></td>
        <td>All | From button | From Input/Output | From Ping Reboot | From Reboot Scheduler | From WebUI | From SMS; default: <b>All</b></td>
        <td>Informs after device reboot occurrences.</td>
    </tr>{{#ifeq: {{{mobile}}} | 1 |
    <tr>
        <td><b>Signal strength</b></td>
        <td>All {{!}} - 121 dBm - 113 dBm {{!}} - 113 dBm - 98 dBm {{!}} - 98 dBm - 93 dBm {{!}} - 93 dBm - 75 dBm {{!}} - 75 dBm - 60 dBm {{!}} - 60 dBm - 50 dBm; default: <b>All</b></td>
        <td>Informs on signal strength changes.</td>
    </tr>
    <tr>
        <td><b>SMS</b></td>
        <td>SMS received</td>
        <td>Informs on received SMS messages.</td>
    </tr>|}}
    <tr>
        <td><b>SSH</b></td>
        <td>All | Successful authentication | Unsuccessful authentication; default: <b>All</b></td>
        <td>Informs on successful or unsuccessful SSH login attempts.</td>
    </tr>{{#ifeq: {{{eth}}} | 1 |
    <tr>
        <td><b>Topology state</b></td>
        <td>Topology changes</td>
        <td>Informs on changes to the device's network topology.</td>
    </tr>|}}{{#ifeq: {{{failover}}} | 1 |
    <tr>
        <td><b>WAN failover</b></td>
        <td>All {{!}} Switched to failover {{!}} Switched to main; default: <b>All</b></td>
        <td>Informs on WAN failover occurrences.</td>
    </tr>|}}
    <tr>
        <td><b>WebUI</b></td>
        <td>ALL | Successful authentication | Unsuccessful authentication; default: <b>All</b></td>
        <td>Informs on successful or unsuccessful HTTP/HTTPS login attempts.</td>
    </tr>{{#ifeq:{{{wireless}}} | 1 |
    <tr>
        <td><b>New WiFi client</b></td>
        <td>All {{!}} Connected {{!}} Disconnected; default: <b>All</b></td>
        <td>Informs on new WiFi clients. Possible triggers are:</td>
    </tr>|}}
</table>
</table>


==SNMP variables list==
==SNMP variables list==
Line 496: Line 678:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ModemImei.0</td>
        <th>Device</th>
        <th></th>
        <th></th>
    </tr>
    <tr>
         <td>serial</td>
         <td>.1.3.6.1.4.1.48690.1.1.0</td>
         <td>.1.3.6.1.4.1.48690.1.1.0</td>
         <td>Modem IMEI</td>
         <td>Device serial number</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ModemModel.0</td>
         <td>deviceName.0</td>
         <td>.1.3.6.1.4.1.48690.1.2.0</td>
         <td>.1.3.6.1.4.1.48690.1.2.0</td>
         <td>Modem model</td>
         <td>Device name</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ModemManufacturer.0</td>
         <td>productCode</td>
         <td>.1.3.6.1.4.1.48690.1.3.0</td>
         <td>.1.3.6.1.4.1.48690.1.3.0</td>
         <td>Modem manufacturer</td>
         <td>Device product (ordering) code</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ModemRevision.0</td>
         <td>batchNumber</td>
         <td>.1.3.6.1.4.1.48690.1.4.0</td>
         <td>.1.3.6.1.4.1.48690.1.4.0</td>
         <td>Modem revision</td>
         <td>Device batch number</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ModemSerial.0</td>
         <td>hardwareRevision</td>
         <td>.1.3.6.1.4.1.48690.1.5.0</td>
         <td>.1.3.6.1.4.1.48690.1.5.0</td>
         <td>Modem serial number</td>
         <td>Device hardware revision</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Imsi.0</td>
         <td>fwVersion</td>
         <td>.1.3.6.1.4.1.48690.1.6.0</td>
         <td>.1.3.6.1.4.1.48690.1.6.0</td>
         <td>Modem IMSI</td>
         <td>Device RutOS firmware version</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>RouterName.0</td>
         <td>deviceUptime</td>
         <td>.1.3.6.1.4.1.48690.1.7.0</td>
         <td>.1.3.6.1.4.1.48690.1.7.0</td>
         <td>Router's name</td>
         <td>Device uptime</td>
    </tr>
    <tr>
        <td>cpuUsage</td>
        <td>.1.3.6.1.4.1.48690.1.8.0</td>
        <td>CPU usage</td>
    </tr>{{#ifeq: {{{mobile}}} | 1 |
    <tr>
        <th>Mobile</th>
        <th></th>
        <th></th>
    </tr>
    <tr>
        <td>modemNum</td>
        <td>.1.3.6.1.4.1.48690.2.1.0</td>
        <td>The number of modems (regardless of their current state) present on this system</td>
    </tr>
    <tr>
        <td>modemTable</td>
        <td>.1.3.6.1.4.1.48690.2.2.0</td>
        <td>A list of modem entries. The number of entries is given by the value of modemNum.</td>
    </tr>
    <tr>
        <td>mIndex</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.1.1</td>
        <td>Available modem indexes; used to index OIDs between when the device has multiple modems</td>
    </tr>
    <tr>
        <td>mDescr</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.2.1</td>
        <td>Modem description</td>
    </tr>
    <tr>
        <td>mImei</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.3.1</td>
        <td>Modem IMEI</td>
    </tr>
    <tr>
        <td>mModel</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.4.1</td>
        <td>Modem model</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ProductCode.0</td>
         <td>mManufacturer</td>
         <td>.1.3.6.1.4.1.48690.1.8.0</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.5.1</td>
         <td>Router's Product code</td>
        <td>Modem manufacturer</td>
    </tr>
    <tr>
        <td>mRevision</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.6.1</td>
         <td>Modem firmware version</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>BatchNumber.0</td>
         <td>mSerial</td>
         <td>.1.3.6.1.4.1.48690.1.9.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.7.1</td>
         <td>Router's batch number</td>
         <td>Modem serial number</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>HardwareRevision.0</td>
         <td>mIMSI</td>
         <td>.1.3.6.1.4.1.48690.1.10.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.8.1</td>
         <td>Router's Hardware Revision number</td>
         <td>Modem IMSI number</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>SimState.0</td>
         <td>mSimState</td>
         <td>.1.3.6.1.4.1.48690.2.1.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.9.1</td>
         <td>SIM card status</td>
         <td>SIM card status</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>PinState.0</td>
         <td>mPinState</td>
         <td>.1.3.6.1.4.1.48690.2.2.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.10.1</td>
         <td>PIN status</td>
         <td>PIN status</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>NetState.0</td>
         <td>mNetState</td>
         <td>.1.3.6.1.4.1.48690.2.3.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.11.1</td>
         <td>Mobile network registration status</td>
         <td>Mobile network registration status</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Signal.0</td>
         <td>mSignal</td>
         <td>.1.3.6.1.4.1.48690.2.4.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.12.1</td>
         <td>Signal strength level</td>
         <td>Signal strength level</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Operator.0</td>
         <td>mOperator</td>
         <td>.1.3.6.1.4.1.48690.2.5.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.13.1</td>
         <td>Operator currently in use</td>
         <td>Current mobile network operator</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>OperatorNumber.0</td>
         <td>mOperatorNumber</td>
         <td>.1.3.6.1.4.1.48690.2.6.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.14.1</td>
         <td>Operator number (MCC+MNC)</td>
         <td>Mobile operator number (MCC+MNC)</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ConnectionState.0</td>
         <td>mConnectionState</td>
         <td>.1.3.6.1.4.1.48690.2.7.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.15.1</td>
         <td>Data session connection state</td>
         <td>Mobile data connection state</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ConnectionType.0</td>
         <td>mConnectionType</td>
         <td>.1.3.6.1.4.1.48690.2.8.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.16.1</td>
         <td>Data session connection type</td>
         <td>Mobile data connection type</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Temperature.0</td>
         <td>mTemperature</td>
         <td>.1.3.6.1.4.1.48690.2.9.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.17.1</td>
         <td>Modem's temperature in 0.1 degrees Celsius</td>
         <td>Modem's temperature in 0.1 degrees Celsius</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ReceivedToday.0</td>
         <td>mCellID</td>
         <td>.1.3.6.1.4.1.48690.2.10.0</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.18.1</td>
         <td>Tee current day's RX packet count</td>
        <td>Cell (Base transceiver station) ID</td>
    </tr>
    <tr>
        <td>mSINR</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.19.1</td>
        <td>SINR value in dB</td>
    </tr>
    <tr>
        <td>mRSRP</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.20.1</td>
        <td>RSRP value in dBm</td>
    </tr>
    <tr>
        <td>mRSRQ</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.21.1</td>
        <td>RSRQ value in dB</td>
    </tr>
    <tr>
        <td>mSent</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.22.1</td>
        <td>Total bytes sent</td>
    </tr>
    <tr>
        <td>mReceived</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.23.1</td>
        <td>Total bytes received</td>
    </tr>
    <tr>
        <td>mIP</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.24.1</td>
         <td>Modem IP address(es)</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>SentToday.0</td>
         <td>mSentToday</td>
         <td>.1.3.6.1.4.1.48690.2.11.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.25.1</td>
         <td>The current day's TX packet count</td>
         <td>Bytes sent today</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ReceivedYesterday.0</td>
         <td>mReceivedToday</td>
         <td>.1.3.6.1.4.1.48690.2.12.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.26.1</td>
         <td>Yesterday's RX packet count</td>
         <td>Bytes received today</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>SentYesterday.0</td>
         <td>mICCID</td>
         <td>.1.3.6.1.4.1.48690.2.13.0</td>
         <td>.1.3.6.1.4.1.48690.2.2.1.27.1</td>
         <td>Yesterday's TX packet count</td>
         <td>SIM ICCID</td>
     </tr>
     </tr>
      <tr>
        <td>mSentCurrentWeek</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.28.1</td>
        <td>Bytes sent this week</td>
    </tr>
      <tr>
        <td>mReceivedCurrentWeek</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.29.1</td>
        <td>Bytes received this week</td>
    </tr>
      <tr>
        <td>mSentCurrentMonth</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.30.1</td>
        <td>Bytes sent this month</td>
    </tr>
      <tr>
        <td>mReceivedCurrentMonth</td>
        <td>.1.3.6.1.4.1.48690.2.2.1.31.1</td>
        <td>Bytes received this month</td>
    </tr>
    <tr>
        <td>connectionUptime</td>
        <td>.1.3.6.1.4.1.48690.2.3.0</td>
        <td>Mobile connection uptime in seconds.</td>
    </tr>|}}{{#ifeq: {{{gps}}} | 1 |
     <tr>
     <tr>
         <td>FirmwareVersion.0</td>
         <th>GPS</th>
         <td>.1.3.6.1.4.1.48690.2.14.0</td>
         <th></th>
         <td>Router's Firmware version</td>
         <th></th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>SimSlot.0</td>
         <td>latitude</td>
         <td>.1.3.6.1.4.1.48690.2.15.0</td>
         <td>.1.3.6.1.4.1.48690.3.1.0</td>
         <td>SIM slot currently in use</td>
         <td>GPS Latitude value</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>RouterUptime.0</td>
         <td>longitude</td>
         <td>.1.3.6.1.4.1.48690.2.16.0</td>
         <td>.1.3.6.1.4.1.48690.3.2.0</td>
         <td>Router up-time in seconds</td>
         <td>GPS Longitude value</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>ConnectionUptime.0</td>
         <td>accuracy</td>
         <td>.1.3.6.1.4.1.48690.2.17.0</td>
         <td>.1.3.6.1.4.1.48690.3.3.0</td>
         <td>Mobile connection up-time in seconds</td>
         <td>GPS coordinate accuracy</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>MobileIP.0</td>
         <td>datetime</td>
         <td>.1.3.6.1.4.1.48690.2.18.0</td>
         <td>.1.3.6.1.4.1.48690.3.4.0</td>
         <td>IP address of the mobile interface</td>
         <td>GPS coordinate fix time</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Sent.0</td>
         <td>numSatellites</td>
         <td>.1.3.6.1.4.1.48690.2.19.0</td>
         <td>.1.3.6.1.4.1.48690.3.5.0</td>
         <td>The amount of data sent through the mobile interface</td>
         <td>Number of available GPS satelites</td>
    </tr>|}}{{#ifeq: {{{notifications}}} | 1 |
    <tr>
        <th>Mobile notifications</th>
        <th></th>
        <th></th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Received.0</td>
         <td>signalChangeNotification</td>
         <td>.1.3.6.1.4.1.48690.2.20.0</td>
         <td>.1.3.6.1.4.1.48690.4.1.1</td>
         <td>The amount of data received through the mobile interface</td>
         <td>Signal strength trap</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>CellID.0</td>
         <td>networkTypeNotification</td>
         <td>.1.3.6.1.4.1.48690.2.21.0</td>
        <td>.1.3.6.1.4.1.48690.4.1.2</td>
         <td>ID of the current mobile operator's cell </td>
        <td>Network type trap</td>
    </tr>|}}{{#switch:{{{name}}} | TCR100 | RUTXR1 | OTD140 | TAP100 | TAP200 = | #default =
    <tr>
        <th>Input/Output notifications</th>
        <th></th>
        <th></th>
    </tr>}}{{#switch:{{{name}}} |RUTX08|RUTX09|RUTX10|RUTX11|RUTX12|RUTX14|RUT950|RUT951|RUT952|RUT260|RUT955|RUT956|RUT240|RUT241|RUTX50|RUT901|RUT906|RUTM08|RUTM09|RUTM10|RUTM11|RUTM12|RUTM14 =
    <tr>
        <td>digitalInputNotification</td>
         <td>.1.3.6.1.4.1.48690.4.2.1</td>
         <td>Digital input trap</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>SINR.0</td>
         <td>digitalOutputNotification</td>
         <td>.1.3.6.1.4.1.48690.2.22.0</td>
        <td>.1.3.6.1.4.1.48690.4.2.2</td>
         <td>SINR value in dB</td>
        <td>Digital output trap</td>
    </tr>| #default =}}{{#switch:{{{name}}} |RUT360|RUT361|RUT300|RUT301|TRB140|TRB141|TRB143|TRB500|TRB245|TRB246|TRB255|TRB256|TRB160 =
    <tr>
        <td>digitalio0Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.3</td>
        <td>Digital I/O 0 trap</td>
    </tr>
    <tr>
        <td>digitalio1Notification</td>
         <td>.1.3.6.1.4.1.48690.4.2.4</td>
        <td>Digital I/O 1 trap</td>
    </tr>| #default =}}{{#switch:{{{name}}} |TRB245|TRB246|TRB255|TRB256 =
    <tr>
        <td>digitalio2Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.5</td>
        <td>Digital I/O 2 trap</td>
    </tr>| #default =}}{{#switch:{{{name}}} |TRB141 =
    <tr>
        <td>drywetio0Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.6</td>
        <td>Dry/Wet I/O 0 trap</td>
    </tr>
    <tr>
        <td>drywetio1Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.7</td>
        <td>Dry/Wet I/O 1 trap</td>
    </tr>| #default =}}{{#switch:{{{name}}} |RUT955|RUT956|RUT906|TRB141 =
    <tr>
        <td>relay0Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.8</td>
        <td>Relay 0 trap</td>
    </tr>| #default =}}{{#switch:{{{name}}}  |TRB141 =
    <tr>
         <td>relay1Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.9</td>
        <td>Relay 1 trap</td>
    </tr>| #default =}}{{#switch:{{{name}}}  |RUT955|RUT956|RUT906|TRB141 =
    <tr>
        <td>acl0Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.10</td>
        <td>ACL trap</td>
    </tr>| #default =}}{{#switch:{{{name}}}  |RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB141|TRB256 =
    <tr>
        <td>adc0Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.11</td>
        <td>ADC trap</td>
    </tr>| #default =}}{{#switch:{{{name}}}  |RUT955|RUT956|RUT906 =
    <tr>
        <td>digitalInput2Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.12</td>
        <td>Digital input2 trap</td>
    </tr>| #default =}}{{#switch:{{{name}}}  |RUT955|RUT956|RUT906|TRB141 =
    <tr>
        <td>digitalIioNotification</td>
        <td>.1.3.6.1.4.1.48690.4.2.13</td>
        <td>Isolated Input trap</td>
    </tr>| #default =}}{{#switch:{{{name}}}  |RUT955|RUT956|RUT906 =
    <tr>
        <td>digitalOutput2Notification</td>
        <td>.1.3.6.1.4.1.48690.4.2.14</td>
        <td>Digital output2 trap</td>
    </tr>| #default =}}{{#switch:{{{name}}}  |TRB160 =
    <tr>
        <td>powerVoltageNotification</td>
        <td>.1.3.6.1.4.1.48690.4.2.15</td>
        <td>Power voltage trap</td>
    </tr>| #default =}}{{#ifeq: {{{hotspot}}} | 1 |
    <tr>
        <th>Hotspot Notifications</th>
        <th></th>
        <th></th>
    </tr>
    <tr>
        <td>clientConnectedNotification</td>
        <td>.1.3.6.1.4.1.48690.4.3.1</td>
        <td>Hotspot client connected trap</td>
    </tr>
    <tr>
        <td>clientDisconnectedNotification</td>
        <td>.1.3.6.1.4.1.48690.4.3.2</td>
        <td>Hotspot client disconnected trap</td>
    </tr>|}}{{#ifeq: {{{hotspot}}} | 1 |
    <tr>
        <th>Hotspot</th>
        <th></th>
        <th></th>
    </tr>
    <tr>
        <td>hsState</td>
        <td>.1.3.6.1.4.1.48690.5.1.0</td>
        <td>Current Hotspot state</td>
    </tr>
    <tr>
        <td>hsIP</td>
        <td>.1.3.6.1.4.1.48690.5.2.0</td>
        <td>Hotspot IP address</td>
    </tr>
    <tr>
        <td>hsNet</td>
        <td>.1.3.6.1.4.1.48690.5.3.0</td>
        <td>WiFi interface ID</td>
    </tr>
    <tr>
        <td>hsAuth</td>
        <td>.1.3.6.1.4.1.48690.5.4.0</td>
        <td>Hotspot authentication type</td>
    </tr>
    <tr>
        <td>hsSessionCount</td>
        <td>.1.3.6.1.4.1.48690.5.5.0</td>
        <td>Hotspot current active session (connected user) count</td>
    </tr>
    <tr>
        <th>Hotspot Sessions</th>
        <th></th>
        <th></th>
    </tr>
    <tr>
        <td>hssIndex</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.1.1</td>
        <td>Connected Hotspot user indexes</td>
    </tr>
    <tr>
        <td>hssMAC</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.2.1</td>
        <td>Hotspot user MAC addresses</td>
    </tr>
    <tr>
        <td>hssIP</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.3.1</td>
        <td>Hotspot user local IP addresses</td>
    </tr>
    <tr>
        <td>hssID</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.4.1</td>
        <td>Hotspot user session unique IDs</td>
    </tr>
    <tr>
        <td>hssUsername</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.5.1</td>
        <td>Hotspot connected user usernames</td>
    </tr>
    <tr>
        <td>hssState</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.6.1</td>
        <td>Hotspot user session states</td>
    </tr>
    <tr>
        <td>hssDwLimit</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.7.1</td>
        <td>Hotspot user download limits</td>
    </tr>
    <tr>
        <td>hssUpLimit</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.8.1</td>
        <td>Hotspot user upload limits</td>
    </tr>
    <tr>
        <td>hssTimeLimit</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.9.1</td>
        <td>Hotspot user session time limit</td>
    </tr>
    <tr>
        <td>hssIdleTimeout</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.10.1</td>
        <td>Hotspot user maximum idle timeout values</td>
    </tr>
    <tr>
        <td>hssDwBandwidth</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.11.1</td>
        <td>Hotspot user maximum download speed</td>
    </tr>
    <tr>
        <td>hssUpBandwidth</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.12.1</td>
        <td>Hotspot user maximum upload speed</td>
    </tr>
    <tr>
        <td>hssURL</td>
        <td>.1.3.6.1.4.1.48690.5.6.1.13.1</td>
        <td>Hotspot URL</td>
    </tr>|}}{{#ifeq: {{{io}}} | 1 |
    <tr>
        <th>Input/Output</th>
        <th></th>
        <th></th>
    </tr>
    <tr>
        <td>ioCount</td>
        <td>.1.3.6.1.4.1.48690.6.1</td>
        <td>Count of I/O</td>
    </tr>
    <tr>
        <td>ioTable</td>
        <td>.1.3.6.1.4.1.48690.6.2</td>
        <td>A list of I/O. The number of entries is given by the value of ioCount</td>
    </tr>
 
    <tr>
        <td>ioEntry</td>
        <td>.1.3.6.1.4.1.48690.6.2.1</td>
        <td>An entry containing information of a particular I/O</td>
    </tr>
    <tr>
        <td>ioIndex</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.1</td>
        <td>A unique value, greater than zero, for each session</td>
    </tr>
    <tr>
        <td>ioSystemName</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.2</td>
        <td>The name of the I/O</td>
    </tr>
    <tr>
        <td>ioName</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.3</td>
        <td>The name of the I/O, as displayed in WebUI</td>
    </tr>
    <tr>
        <td>ioType</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.4</td>
        <td>A description of I/O type</td>
    </tr>
    <tr>
        <td>ioBidirectional</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.5</td>
        <td>Is I/O bidirectional?</td>
    </tr>
    <tr>
        <td>ioState</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.6</td>
        <td>State of I/O</td>
    </tr>
    <tr>
        <td>ioInput</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.7</td>
        <td>Is I/O an input?</td>
    </tr>
    <tr>
        <td>ioInverted</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.8</td>
        <td>Is value of I/O inverted?</td>
    </tr>
    <tr>
        <td>ioCurrent</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.9</td>
        <td>Current amount flowing though ACL</td>
    </tr>
    <tr>
        <td>ioPercentage</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.10</td>
        <td>Percentage of ACL</td>
    </tr>
    <tr>
        <td> ioStateNumeric</td>
        <td>.1.3.6.1.4.1.48690.6.2.1.11</td>
        <td>Numeric state of I/O</td>
    </tr>|}}{{#ifeq: {{{wireless}}} | 1 |
    <tr>
        <th>Wireless</th>
        <th></th>
        <th></th>
    </tr>
    <tr>
        <td>radioCount</td>
        <td>.1.3.6.1.4.1.48690.7.1</td>
        <td>Amount of wireless radios</td>
    </tr>
    <tr>
        <td>radioTable</td>
        <td>.1.3.6.1.4.1.48690.7.2</td>
        <td>A list of wireless radios</td>
    </tr>
 
    <tr>
        <td>radioEntry</td>
        <td>.1.3.6.1.4.1.48690.7.2.1</td>
        <td>An entry containing information of a particular wireless radio</td>
    </tr>
    <tr>
        <td>radioIndex</td>
        <td>.1.3.6.1.4.1.48690.7.2.1.1</td>
        <td>A unique value, greater than zero, for each wireless radio</td>
    </tr>
    <tr>
        <td>radioName</td>
        <td>.1.3.6.1.4.1.48690.7.2.1.2</td>
        <td>The name of the wireless radio</td>
    </tr>
    <tr>
        <td>radioUpState</td>
        <td>.1.3.6.1.4.1.48690.7.2.1.3</td>
        <td>Is the radio currently turned on?</td>
    </tr>
    <tr>
        <td>radioDisabledState</td>
        <td>.1.3.6.1.4.1.48690.7.2.1.4</td>
        <td>Is the radio currently disabled?</td>
    </tr>
    <tr>
        <td>radioChannel</td>
        <td>.1.3.6.1.4.1.48690.7.2.1.5</td>
        <td>Current active channel of the wireless radio</td>
    </tr>
    <tr>
        <td>wIfaceCount</td>
        <td>.1.3.6.1.4.1.48690.7.3</td>
        <td>Amount of wireless interfaces</td>
    </tr>
    <tr>
        <td>wIfaceTable</td>
        <td>.1.3.6.1.4.1.48690.7.4</td>
        <td>A list of wireless interfaces</td>
    </tr>
    <tr>
        <td>wIfaceEntry</td>
        <td>.1.3.6.1.4.1.48690.7.4.1</td>
        <td>An entry containing information of a particular wireless interface</td>
    </tr>
    <tr>
        <td>wIfaceIndex</td>
        <td>.1.3.6.1.4.1.48690.7.4.1.1</td>
        <td>The SSID of a wireless interface</td>
    </tr>
    <tr>
        <td>wIfaceSSID</td>
        <td>.1.3.6.1.4.1.48690.7.4.1.2</td>
        <td>The SSID of a wireless interface</td>
    </tr>
    <tr>
        <td>wIfaceHidden</td>
        <td>.1.3.6.1.4.1.48690.7.4.1.3</td>
        <td>Is the wireless interface hidden?</td>
    </tr>
    <tr>
        <td>wIfaceEncryption</td>
        <td>.1.3.6.1.4.1.48690.7.4.1.4</td>
        <td>The encryption used by the wireless interface</td>
    </tr>
    <tr>
        <td>wIfaceMode</td>
        <td>.1.3.6.1.4.1.48690.7.4.1.5</td>
        <td>The mode of the wireless interface</td>
    </tr>|}}{{#ifeq: {{{pvlan}}} | 1 |
    <tr>
        <th>Port based vlan</th>
        <th></th>
        <th></th>
    </tr>
    <tr>
        <td>pVlanCount</td>
        <td>.1.3.6.1.4.1.48690.8.1</td>
        <td>Amount of port-based virtual networks</td>
    </tr>
    <tr>
        <td>pVlanTable</td>
        <td>.1.3.6.1.4.1.48690.8.2</td>
        <td>A list port-based virtual networks</td>
    </tr>
    <tr>
        <td>pVlanEntry</td>
        <td>.1.3.6.1.4.1.48690.8.2.1</td>
        <td>An entry containing information about a port-based VLAN</td>
    </tr>
    <tr>
        <td>pVlanIndex</td>
        <td>.1.3.6.1.4.1.48690.8.2.1.1</td>
        <td>The index of the port-based VLAN</td>
    </tr>
    <tr>
        <td>pVlanNum</td>
        <td>.1.3.6.1.4.1.48690.8.2.1.2</td>
        <td>The vlan number of the port-based VLAN</td>
    </tr>
    <tr>
        <td>pVlanPorts</td>
        <td>.1.3.6.1.4.1.48690.8.2.1.3</td>
        <td>The assigned ports of the port-based VLAN</td>
    </tr>
    <tr>
        <td>pVlanVID</td>
        <td>.1.3.6.1.4.1.48690.8.2.1.4</td>
        <td>The vlan ID of the port-based VLAN</td>
    </tr>|}}{{#ifeq: {{{ivlan}}} | 1 |
    <tr>
        <th>Interface based vlan</th>
        <th></th>
        <th></th>
    </tr>
    <tr>
        <td>iVlanCount</td>
        <td>.1.3.6.1.4.1.48690.8.3</td>
        <td>Amount of interface-based virtual networks</td>
    </tr>
    <tr>
        <td>iVlanTable</td>
        <td>.1.3.6.1.4.1.48690.8.4</td>
        <td>A list interface-based virtual networks</td>
    </tr>
    <tr>
        <td>iVlanEntry</td>
        <td>.1.3.6.1.4.1.48690.8.4.1</td>
        <td>An entry containing information about an interface-based VLAN</td>
    </tr>
    <tr>
        <td>iVlanIndex</td>
        <td>.1.3.6.1.4.1.48690.8.4.1.1</td>
        <td>The index of an iface-based VLAN</td>
    </tr>
    <tr>
        <td>iVlanName</td>
        <td>.1.3.6.1.4.1.48690.8.4.1.2</td>
        <td>The name of an iface-based VLAN</td>
    </tr>
    <tr>
        <td>iVlanType</td>
        <td>.1.3.6.1.4.1.48690.8.4.1.3</td>
        <td>The type of an iface-based VLAN</td>
    </tr>
    <tr>
        <td>iVlanIfName</td>
        <td>.1.3.6.1.4.1.48690.8.4.1.4</td>
        <td>The interface name of an iface-based VLAN</td>
    </tr>
    <tr>
        <td>iVlanVID</td>
        <td>.1.3.6.1.4.1.48690.8.4.1.5</td>
        <td>The VLAN ID of an iface-based VLAN</td>
    </tr>|}}{{#ifeq: {{{sqm}}} | 1 |
    <tr>
        <th>Smart Queue Management</th>
        <th></th>
        <th></th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>RSRP.0</td>
         <td>queueCount</td>
         <td>.1.3.6.1.4.1.48690.2.23.0</td>
         <td>.1.3.6.1.4.1.48690.9.1</td>
         <td>RSRP value in dBm</td>
         <td>Amount of traffic shaping configs</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>RSRQ.0</td>
         <td>queueTable</td>
         <td>.1.3.6.1.4.1.48690.2.24.0</td>
         <td>.1.3.6.1.4.1.48690.9.2</td>
         <td>RSRQ value in dB</td>
         <td>A list of traffic shaping configs</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotId.0</td>
         <td>queueEntry</td>
         <td>.1.3.6.1.4.1.48690.3.4.1.0</td>
         <td>.1.3.6.1.4.1.48690.9.2.1</td>
         <td>Hotspot ID</td>
         <td>Entry containg info of a traffic shaping config</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotSsid.0</td>
         <td>queueIndex</td>
         <td>.1.3.6.1.4.1.48690.3.4.2.0</td>
         <td>.1.3.6.1.4.1.48690.9.2.1.1</td>
         <td>Hotspot SSID</td>
         <td>The index of the queue</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotEnableState.0</td>
         <td>queueName</td>
         <td>.1.3.6.1.4.1.48690.3.4.3.0</td>
         <td>.1.3.6.1.4.1.48690.9.2.1.2</td>
         <td>Hotspot status (enabled or disabled)</td>
         <td>The internal name of the queue</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotIP.0</td>
         <td>queueEnabled</td>
         <td>.1.3.6.1.4.1.48690.3.4.4.0</td>
         <td>.1.3.6.1.4.1.48690.9.2.1.3</td>
         <td>Hotspot interface IP address</td>
         <td>Is the queue enabled?</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotDownloadBandWidth.0</td>
         <td>queueIface</td>
         <td>.1.3.6.1.4.1.48690.3.4.5.0</td>
         <td>.1.3.6.1.4.1.48690.9.2.1.4</td>
         <td>Hotspot download bandwidth</td>
         <td>The assigned interface of the queue</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUploadBandWidth.0</td>
         <td>queueDownLimit</td>
         <td>.1.3.6.1.4.1.48690.3.4.6.0</td>
         <td>.1.3.6.1.4.1.48690.9.2.1.5</td>
         <td>Hotspot upload bandwidth</td>
         <td>The download limit of the queue</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUsers.0</td>
         <td>queueUpLimit</td>
         <td>.1.3.6.1.4.1.48690.3.4.7.0</td>
         <td>.1.3.6.1.4.1.48690.9.2.1.6</td>
         <td>Hotspot users list</td>
         <td>The upload limit of the queue</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUsersPass.0</td>
         <td>queueQdisk</td>
         <td>.1.3.6.1.4.1.48690.3.4.8.0 </td>
         <td>.1.3.6.1.4.1.48690.9.2.1.7</td>
         <td>Hotspot users password list </td>
         <td>The queuing discipline in use for this queue</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUsersActive.0</td>
         <td>queueScript</td>
         <td>.1.3.6.1.4.1.48690.3.4.9.0</td>
         <td>.1.3.6.1.4.1.48690.9.2.1.8</td>
         <td>List of active Hotspot users</td>
         <td>The queuing discipline setup script used in this queue</td>
    </tr>|}}{{#ifeq: {{{port}}} | 1 |
    <tr>
        <th>Port</th>
        <th></th>
        <th></th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUsersMac.0</td>
         <td>portCount</td>
         <td>.1.3.6.1.4.1.48690.3.4.10.0</td>
         <td>.1.3.6.1.4.1.48690.10.1.0</td>
         <td>Hotspot users MAC address list</td>
         <td>Number of ports on device</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUsersIp.0</td>
         <td>portTable</td>
         <td>.1.3.6.1.4.1.48690.3.4.11.0</td>
         <td>.1.3.6.1.4.1.48690.10.2.0</td>
         <td>Hotspot users IP address list</td>
         <td>A list of port entries. The number of entries is given by the value of portCount</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUsersStartTime.0</td>
         <td>portEntry</td>
         <td>.1.3.6.1.4.1.48690.3.4.12.0</td>
         <td>.1.3.6.1.4.1.48690.10.2.1.0</td>
         <td>Hotspot users log in time list</td>
         <td>An entry containing information of a particular port</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUsersUseTime.0</td>
         <td>pIndex</td>
         <td>.1.3.6.1.4.1.48690.3.4.13.0</td>
         <td>.1.3.6.1.4.1.48690.10.2.1.1</td>
         <td>Hotspot users log in up-time list</td>
         <td>A unique value, greater than zero, for each port</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUsersDownload</td>
         <td>pName</td>
         <td>.0.1.3.6.1.4.1.48690.3.4.14.0</td>
         <td>.1.3.6.1.4.1.48690.10.2.1.2</td>
         <td>Hotspot users downloaded data count</td>
         <td>Port's name</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotUsersUpload.0</td>
         <td>pNumber</td>
         <td>.1.3.6.1.4.1.48690.3.4.15.0</td>
         <td>.1.3.6.1.4.1.48690.10.2.1.3</td>
         <td>Hotspot users uploaded data count</td>
         <td>Port's number</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>hotSpotEndTime.0</td>
         <td>pPosition</td>
         <td>.1.3.6.1.4.1.48690.3.4.16.0</td>
         <td>.1.3.6.1.4.1.48690.10.2.1.4</td>
         <td>Hotspot</td>
         <td>Port's physical position</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>DigitalInput.0</td>
         <td>pState</td>
         <td>.1.3.6.1.4.1.48690.5.1.0</td>
         <td>.1.3.6.1.4.1.48690.10.2.1.5</td>
         <td>Digital input state</td>
         <td>Port's state</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>DigitalIsolatedInput.0</td>
         <td>pSpeed</td>
         <td>.1.3.6.1.4.1.48690.5.2.0</td>
         <td>.1.3.6.1.4.1.48690.10.2.1.6</td>
         <td>Digital isolated input state</td>
         <td>Port's speed</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>AnalogInput.0</td>
         <td>pDuplex</td>
         <td>.1.3.6.1.4.1.48690.5.3.0</td>
         <td>.1.3.6.1.4.1.48690.10.2.1.7</td>
         <td>Analog input state</td>
         <td>Boolean value whether port is duplex or not</td>
    </tr>|}}{{#ifeq: {{{mwan3}}} | 1 |
    <tr>
        <th>MultiWAN</th>
        <th></th>
        <th></th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>DigitalOCOutput.0</td>
         <td>mwan3Count</td>
         <td>.1.3.6.1.4.1.48690.5.4.0</td>
         <td>.1.3.6.1.4.1.48690.12.1</td>
         <td>Digital OC output state</td>
         <td>Count of Multiwan interfaces</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>DigitalRelayOutput.0</td>
         <td>mwan3Table</td>
         <td>.1.3.6.1.4.1.48690.5.5.0</td>
         <td>.1.3.6.1.4.1.48690.12.2</td>
         <td>Digital Relay output state</td>
         <td>A list of Multiwan interfaces. The number of entries is given by the value of mwan3Count</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>AnalogInputCalc.0</td>
         <td>mwan3Entry</td>
         <td>.1.3.6.1.4.1.48690.5.6.0</td>
         <td>.1.3.6.1.4.1.48690.12.2.1</td>
         <td>Analog input value</td>
         <td>An entry containing information of a particular Multiwan interface</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Longtitude.0</td>
         <td>mwan3Index</td>
         <td>.1.3.6.1.4.1.48690.6.1.0</td>
         <td>.1.3.6.1.4.1.48690.12.2.1.1</td>
         <td>GPS Longitude value</td>
         <td>Unique value, greater than zero, for each session</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Latitude.0</td>
         <td>mwan3Name</td>
         <td>.1.3.6.1.4.1.48690.6.2.0</td>
         <td>.1.3.6.1.4.1.48690.12.2.1.2</td>
         <td>GPS Latitude value</td>
         <td>Name of Multiwan interface</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Accuracy.0</td>
         <td>mwan3Enabled</td>
         <td>.1.3.6.1.4.1.48690.6.3.0</td>
         <td>.1.3.6.1.4.1.48690.12.2.1.3</td>
         <td>GPS coordinate accuracy</td>
         <td>Numeric value indicating if interface is enabled or not</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Datetime.0</td>
         <td>mwan3Uptime</td>
         <td>.1.3.6.1.4.1.48690.6.4.0</td>
         <td>.1.3.6.1.4.1.48690.12.2.1.4</td>
         <td>GPS coordinate fix time</td>
         <td>Multiwan interface uptime</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>NumSatellites.0</td>
         <td>mwan3Status</td>
         <td>.1.3.6.1.4.1.48690.6.5.0</td>
         <td>.1.3.6.1.4.1.48690.12.2.1.5</td>
         <td>Number of GPS satelites</td>
         <td>Status of Multiwan interface</td>
     </tr>
     </tr>
    <tr>
        <td>mwan3Ip</td>
        <td>.1.3.6.1.4.1.48690.12.2.1.6</td>
        <td>IP addresses that Multiwan interface tracks</td>
    </tr>|}}
</table>
</table>
[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]

Latest revision as of 12:16, 4 September 2024

The information in this page is updated in accordance with firmware version .


Summary

Simple Network Management Protocol (SNMP) is a network management protocol used for collecting information and configuring network devices. This page is an overview of the SNMP function in {{{name}}} devices.

Note: SNMP is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

SNMP settings

The SNMP settings page is used to configure SNMP accessibility and general SNMP information for your device.

SNMP agent settings

Field Value Description
Enable SNMP service off | on; default: off Run SNMP service on system's startup.
Enable remote access off | on; default: off Open port in firewall so that SNMP service may be reached from WAN.
IP type IPv4 | IPv6 | IPv4v6; default: IPv4 IP type used by SNMP.
Port integer [0..65535]; default: 161 SNMP service's port.
SNMP v1 Mode off | on; default: on Enable/disable SNMP v1 Mode.
SNMP v2c Mode off | on; default: on Enable/disable SNMP v2c Mode.
SNMP v3 Mode off | on; default: off Enable/disable SNMP v3 Mode.

SNMP System Summary

The SNMP System Summary section contains general information about SNMP on this device. You can also download this device's MIB file from this section.

Field Value Description
MIB file -(interactive button) Downloads the device's MIB file.
System OID 1.3.6.1.4.1.48690 OID or Object Identifier, is an identifier used to name and point to an object in the MIB hierarchy.
Location string; default: location Trap named sysLocation.
Contact string; default: [email protected] Trap named sysContact.
Name string; default: name Trap named sysName.

SNMP v3 users

The SNMP v3 users page is used to create and manage users, who can be authenticated using SNMP v3. To configure an SNMP user, you must first create it:

  1. Enter a custom name for the new user in the 'Name' field.
  2. Click the 'Add' button.
  3. Click the 'Edit' button next to the newly created user.

The SNMP user configuration window should look similar to this:

Note: this table has coloring scheme to indicate which fields can be seen with different configuration.

Field Value Description
Enable off | on; default: off Turns this SNMP user on or off.
Username string; default: none Set username to access SNMP.
Security level No authentication, no privacy | Authentication, no privacy | Authentication and privacy; default: No authentication, no privacy A security level is an authentication strategy that is set up for the user.

No authentication, no privacy - authenticates with a username. Authentication - provides MD5 or SHA algorithms for authentication.

Privacy - Provides DES or AES encryption.
Authentication, no privacy | Authentication and privacy: Authentication type SHA | MD5; default: SHA Set authentication type to use with SNMP v3.
Authentication, no privacy | Authentication and privacy: Authentication passphrase string; default: none Set authentication passpharse to generate key for SNMP v3.
Authentication and privacy: Privacy type DES | AES; default: DES Set privacy type to use with SNMP v3.
Authentication and privacy: Privacy passphrase string; default: none Set privacy passpharse to generate key for SNMP v3.
Access Mode Read-Only | Read-Write; default: Read-Only The access mode specifies the access the hosts in the community are allowed with respect to retrieving and modifying the MIB variables from a specific SNMP agent.
MIB subtree string; default: none Leave empty to access full MIB tree.

Communities

The SNMP Community section is used to manage access rights. You can edit an SNMP community by clicking the 'Edit' button next to it:

This will redirect you to the community's configuration page.

Field Value Description
Community name string; default: none Name of the community.
IP Address ip; default: none IP address of the community.
IP Mask ip; default: none Netmask for IP of the community.
Access Mode Read-Only | Read-Write; default: Read-Only Access mode for current community.

SNMPv6 community configuration page:

Field Value Description
Community name string; default: public Name of the community.
Source ip6 | domain name; default: default Source of the community.
Access Mode Read-Only | Read-Write; default: Read-Only Access mode for current community.

Trap Settings

SNMP Traps are used to send alert messages to a central collector, the “SNMP manager” when an important event happens. A benefit of using Traps for reporting alarms is that they trigger instantaneously, rather than waiting for a status request from the manager.

Trap settings page is divided in two sections - Trap service settings and Trap rules. Trap service settings lets you manage hosts which will get configured alert messages, Trap rules lets you manage rules which when triggered will send alerts.

Trap Service Settings

The Trap Service Settings is used to manage hosts which will be alerted when an SNMP trap is triggered. The host list is empty by default thus, to begin configuration you must first create at least one host.

Click the 'Add' button at the bottom-right side of the table to create a new host.

The newly added Host configuration should look similar to this:

Field Value Description
Host/IP url | ip; default: none Hostname or IP address to transfer SNMP traffic to.
Port integer [0..65535]; default: 162 Trap host's port number.
Community string; default: Public Name of the community to which the trap belongs.
Delete - (interactive button) Deletes the host next to the button.
off/on slider off | on; default: off Turns the host on or off. SNMP traffic is only sent to enabled hosts.

Trap Rules

SNMP Trap Rules are alerts that trigger when certain user-specified events occur. When the trigger event happens, the trap will notify known SNMP hosts.

You can create a new trap rule by clicking the 'Add' button.

You should be redirected to the rule's configuration page which should look something like this:

[[File:Networking_rutos_manual_snmp_trap_settings_trap_rules_modify_trap_rule_mobile_{{{mobile}}}.png|border|class=tlt-border]]

Above is an example of what rule configuration window looks like. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean.

To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.




Events log

Event Event subtype Description
Config change All | Specific config change; default: all Informs on changes to the device's configuration.
Reboot All | From Web UI | From ping reboot | From reboot scheduler | From button; default: All Informs on if the device was rebooted.
Startup Device startup completed Informs on when the device is fully booted.
New DHCP client All | Connected from LAN; default All Informs on new DHCP lease give outs.
Reboot All | From button | From Input/Output | From Ping Reboot | From Reboot Scheduler | From WebUI | From SMS; default: All Informs after device reboot occurrences.
SSH All | Successful authentication | Unsuccessful authentication; default: All Informs on successful or unsuccessful SSH login attempts.
WebUI ALL | Successful authentication | Unsuccessful authentication; default: All Informs on successful or unsuccessful HTTP/HTTPS login attempts.


SNMP variables list

Name OID Description
Device
serial .1.3.6.1.4.1.48690.1.1.0 Device serial number
deviceName.0 .1.3.6.1.4.1.48690.1.2.0 Device name
productCode .1.3.6.1.4.1.48690.1.3.0 Device product (ordering) code
batchNumber .1.3.6.1.4.1.48690.1.4.0 Device batch number
hardwareRevision .1.3.6.1.4.1.48690.1.5.0 Device hardware revision
fwVersion .1.3.6.1.4.1.48690.1.6.0 Device RutOS firmware version
deviceUptime .1.3.6.1.4.1.48690.1.7.0 Device uptime
cpuUsage .1.3.6.1.4.1.48690.1.8.0 CPU usage
Input/Output notifications

[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_snmp&oldid=132147"