Template:Networking rutos manual input output: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
 
(114 intermediate revisions by 16 users not shown)
Line 1: Line 1:
{{Template:Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05.1
| series = {{{series}}}
| series     = {{{series}}}
| name  = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| name  = {{{name}}}
}}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>
<p style="color:red">Warning: From 7.0 version I/O parameters and controls have changed compared to {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier legacy versions.</p>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>


__TOC__
<p style="color:red">Warning: From 7.1 version I/O parameters and controls have changed compared to {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier legacy versions.</p>|}}
==Summary==
==Summary==


<b>Inputs</b> and <b>outputs</b> are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. This chapter is an overview of the Input/Output section for {{{name}}} devices.
<b>Inputs</b> and <b>outputs</b> are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events.
 
This chapter of the user manual provides an overview of the Input/Output section for {{{name}}} devices.


{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
Line 13: Line 23:
}}
}}


{{#switch:{{{series}}}
==Physical characteristics and I/O pin mapping==
| RUTX =
==Characteristics==


The router's input/output pins can be found inside the power socket:
Electrical characteristics and I/O pin mapping information are presented below.


[[File:Networking_rutx_manual_input_output_status_pinout_v1.png]]
{{Template:Networking_rutos_manual_input_output_pinout
| series        = {{{series}}}
| configurableio = {{{configurableio}}}
| input_volts    = {{{input_volts}}}
}}{{#switch: {{{name}}}
| TRB141 =<h3>Input/Output Connector Pinout</h3>
----
----
The electric characteristics for the input and output pins are as follows:
[[File:Networking_trb141_manual_input_output_input_output_connector_pinout_v2.png]]


<ul>
<ul>
     <li>Digital non-isolated input:
     <li><b>DI<sub>1</sub></b> & <b>DI<sub>2</sub></b> - DRY/WET configurable inputs:
        <ul>
            <li><b>WET</b>: 0-1.9 V is detected as logical "0"; 1.9-3.8 V is detected as logical "1"</li>
            <li><b>DRY</b>: is detected as logical "0"  when the input is shorted to GND; otherwise is detected as logical "1"</li>
        </ul>
    </li>
    <li><b>NC<sub>1</sub></b>, <b>C<sub>1</sub></b> & <b>NO<sub>1</sub></b> - Normally Closed, Common and Normally Open contacts of the internal Non-Latching Relay respectively.<br>Maximum relay ratings: 0.5 A at 60 VDC/70 VAC, 1 A at 30 VDC/VAC.</li>
    <li><b>NC<sub>2</sub></b>, <b>C<sub>2</sub></b> & <b>NO<sub>2</sub></b> - Normally Closed, Common and Normally Open contacts of the internal Latching Relay respectively.<br>Maximum relay ratings: 0.8 A at 70 VDC, 0.9 A at 70 VAC, 2 A at 30 VDC/VAC.</li>
    <li><b>A</b> - ADC input. Analog voltage range: 0-30 V. The input can be configured for 4-20 mA sensor protocol as current measurement (ACL) of 0-30 mA.</li>
    <li><b>l</b> and <b>⏚</b> - isolated input contacts.
         <ul>
         <ul>
             <li>logic low: 0 - 5 V</li>
             <li>0-7.3 V is detected as logical "0"</li>
             <li>logic high: 8 - 40 V</li>
             <li>7.3-71 V is detected as logical "1"</li>
         </ul>
         </ul>
     </li>
     </li>
     <li>Digital open collector output: 30 V, 300 mA</li>
     <li><b>+</b> - a power output connected directly to gateway's power supply input pin. This Output can be used to power an external 4-20 mA current sensor.</li>
    <li><b>3.8</b> is a 3.8 V power output that can be used to power 1-Wire sensors.</li>
    <li><b>1W</b> - 1-Wire protocol input/output.</li>
    <li><b>⏚</b> - GND contact.</li>
    <li><b>''Note:''</b> input circuit components have tolerance of +-1%.</li>
</ul>
</ul>
| TRB1 =
| RUT955|RUT956|RUT906 =<h3>Input/Output Connector Pinout</h3>
{{#ifeq:{{{name}}}|TRB141
|
==Characteristics==
 
TRB141 has eighteen input/output pins, two of them can be found inside the power socket and the rest sixteen are on the side of the device. A list of Input/Output electric characteristics inherent in TRB141 devices can be found bellow.
 
===Power Socket Pins===
----[[File:Networking_trb141_manual_I-O_power_v1.png|border|class=tlt-border|353x353px]]<br />
 
*'''Power''' pin: +9 ... +30 VDC positive power input.
*'''Ground''' pin: negative/ground connection from power supply.
*'''I/0''' pins: programmable Input/Output pins (Open Collector output, max  30V or Digital input where 0-7.3 V is detected as logical "0", 7.3-30 V is  detected as logical "1").
 
===Connector Pins===
----
----
[[File:Networking_trb141_manual_I-O_socket_v1.png|345x345px|border|class=tlt-border]]
[[File:Networking_rut955_manual_input_output_input_output_connector_pinout_v3.png]]
 
*'''DI1''' and '''DI2''' are DRY/WET configurable inputs. WET: 0-1.9 V is detected as logical "0", 1.9-3.8 V is detected as logical "1".  DRY: Logical "0" is detected when input is shorted to GND, otherwise  input is detected as logical "1".
*'''NC<sub>1</sub>  C<sub>1</sub>''' and '''NO<sub>1</sub>''' are respectively Normally Closed, Common and Normally Open contacts of internal Non-Latching Relay. Maximum relay ratings: 0.5A at 60 VDC/70 VAC, 1A at 30 VDC/VAC.
*'''NC<sub>2</sub> C<sub>2</sub>''' and '''NO<sub>2</sub>''' are respectively Normally Closed, Common and Normally Open contacts of internal Latching Relay. Maximum relay ratings: 0.8A at 70 VDC, 0.9A at 70 VAC, 2A at 30 VDC/VAC.
*'''A''' is ADC input. Analog voltage range 0 - 30 V. Input can be configured for 4-20mA sensor protocol as current measurement of 0 - 30 mA.
*'''l''' and '''⏚''' are isolated input contacts. 0-7.3 V is detected as logical "0",  7.3-71 V is detected as logical "1".
*'''+''' is power output connected directly to gateway's power supply input pin.  This Output can be used for powering external 4-20 mA current sensor.
*'''3.8''' is 3.8V power output which can be used to power 1-Wire sensors when needed.
*'''1W''' 1-Wire protocol input/output.
*'''⏚''' is GND contact.
|
==Characteristics==
 
The {{{name}}} input/output pins can be found inside the power socket:
 
===Power Socket Pins===
----[[File:Networking_trb141_manual_I-O_power_v1.png|border|class=tlt-border|353x353px]]<br />
 
*'''Power''' pin: +9 ... +30 VDC positive power input.
*'''Ground''' pin: negative/ground connection from power supply.
*'''I/0''' pins: programmable Input/Output pins (Open Collector output, max  30V or Digital input where 0-7.3 V is detected as logical "0", 7.3-30 V is  detected as logical "1").
}}
 
| TRB2XX =
 
|
}}
 
==Status==
 
{{#switch:{{{series}}}
| TRB2 =
The <b>Status</b> page displays the current states of the device configurable inputs and outputs:
 
[[File:Networking_trb2_manual_input_output_status_v1.png|border|class=tlt-border]]
 
You can invert Input pins by clicking on slider in <b>Inversion</b> column and switch Outputs pin state by clicking on slider in <b>State</b> column.
 
===Status from command line===
----
You can also obtain the status of the input or output from the command line. List of ubus possible <b>values</b> in {{{name}}} devices:
 
ioman.adc.adc0
ioman.gpio.dio0
ioman.gpio.dio1
ioman.gpio.dio2
 
Call command <b>ubus call <u>value</u> status </b>:
root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status
{
        "value": "0",
        "direction": "out",
        "bi_dir": true,
        "invert_input": false
}


<ul>
<ul>
     <li><b>dio0</b> is configurable input / output:
     <li><b>DI</b><sub>1</sub> and <b>⏚</b><sub>1</sub> - Digital input (dry type):</li>
         <ul>
         <ul>
             <li>"value": "<b>0</b>" means low level state.</li>
             <li>0-1.2 V is detected as logical "1"</li>
             <li>"value": "<b>1</b>" means high level state.</li>
             <li>1.8-3 V is detected as logical "0"</li>
         </ul>
         </ul>
     </li>
     <li><b>DI</b><sub>2</sub> and <b>⏚</b><sub>2</sub> - Digital galvanically isolated input:</li>
    <li><b>adc0</b> is analog input:
         <ul>
         <ul>
             <li>"value": "<b>0.54</b>" means 0.54V.</li>
             <li>0-4 V is detected as logical "0"</li>
            <li>9-30 V is detected as logical "1"</li>
         </ul>
         </ul>
     </li>
     <li><b>DO</b> and <b>⏚</b><sub>3</sub> - Galvanically isolated open collector (OC) output: 30 V, 250 mA.</li> 
    <li><b>+V</b> and <b>⏚</b><sub>3</sub> - External VCC for <b>DO</b> (<30 V).</li> 
    <li><b>C & NO</b> - Common and Normally Open contacts of the internal Non-Latching Relay respectively.<br>Maximum relay ratings: 4 A at 24 VDC, 4 A at 40 VAC.</li>
    <li><b>A</b> and <b>⏚</b><sub>1</sub> - ADC input. Analog voltage range: 0-24 V. The input can be configured for 4-20 mA sensor protocol as current measurement (ACL).<span class="asterisk">*</span></li>
    <li><b>⏚</b><sub>1</sub> - GND for <b>DI</b><sub>1</sub> and <b>A</b>.</li>
    <li><b>⏚</b><sub>2</sub> - GND for <b>DI</b><sub>2</sub>.
    <li><b>⏚</b><sub>3</sub> - GND for <b>DO</b> pins.
    <li><b>''Note:''</b> input circuit components have tolerance of +-1%.</li>
</ul>
</ul>
| TRB1 =
{{#ifeq:{{{name}}}|TRB141
|
The <b>Status</b> page displays the current states of the device configurable inputs and outputs:
[[File:Networking_trb1_manual_input_output_status_v2.png|border|class=tlt-border]]
You can invert Input pins by clicking on slider in <b>Inversion</b> column and switch Outputs pin state by clicking on slider in <b>State</b> column.
===Status from command line===
----
----
You can also obtain the status of the input or output from the command line. List of ubus possible <b>values</b> in {{{name}}} devices:
<span class="asterisk">*</span> The deviation from the actual input voltage and the voltage measured by the device is dependent on the input voltage value:


ioman.acl.acl0
<ul>
ioman.adc.adc0
    <li>'''≥ 1.5 V''' - the deviation is about ± 10 % and gets lower when the input voltage increases towards 5 V</li>
ioman.dwi.dwi0
    <li>'''≥ 5 V''' - the deviation does not exceed ± 3 %</li>
ioman.dwi.dwi1
    <li>'''≥ 9 V''' - the deviation does not exceed ± 2 %</li>
ioman.gpio.dio0
</ul>
ioman.gpio.dio1
ioman.gpio.iio
ioman.gpio.onewire
ioman.relay.relay0
ioman.relay.relay1


In order to read value use '''''status''''' command.
<b>Additional note</b>: the deviation values specified above are applicable in temperatures of < 50 °C. Under higher temperatures the deviation values become considerably higher.
}}


ubus call ioman.gpio.dio0 status
==Status==
ubus call ioman.relay.relay0 status


To change input settings use '''''update''''' command and write the value.
The <b>Status</b> page displays the current states of the device's input and output pins:


ubus call ioman.gpio.dio0 update '{"value":"0"}'
{{#switch: {{{name}}}  
ubus call ioman.gpio.dio0 update '{"value":"1"}'
| TRB141 = [[File:Networking_trb141_manual_input_output_status_v5.png|border|class=tlt-border]]
 
| RUT955|RUT956|RUT906 = [[File:Networking_RUT955_manual_input_output_status_v4.png|border|class=tlt-border]]
To change relay settings use '''''update''''' command and write state.
| TRB245|TRB246|TRB255|TRB256 = [[File:Networking_trb2_manual_input_output_status_v3.png|border|class=tlt-border]]
 
| [[File:Networking_{{lc:{{{series}}}}}_manual_input_output_status.png|border|class=tlt-border]]
ubus call ioman.relay.relay0 update '{"state":"open"}'
}}
ubus call ioman.relay.relay0 update '{"state":"closed"}'
 
===Reading I/O values from directory===
----
 
You can also collect I/O values straight from directories in your device.
 
====Digital inputs, Relay outputs====
----
 
Following is a list of I/O directories in '''''/sys/class/gpio/''''':
 
dwi1(dry wet) input 14; toggle 12 (to read value refer to gpio14, to change state dry/wet refer to gpio12)
dwi2(dry wet) input 15; toggle 38 (to read value refer to gpio15, to change state dry/wet refer to gpio38)
relay open 20; closed 22; (turn off gpio20 set to 0, turn on gpio22 set value to 1; and visa versa)
latching relay open 23; close 21 (turn off gpio23 set to 0, turn on gpio21 set value to 1; and visa versa)
dio0 (power socket) input 13; output 16 (direction can be changed, to read input use gpio13, to control output use gpio16)
dio1 (power socket) input 17; output 78 (direction can be changed, to read input use gpio17, to control output use gpio78)
iio (isolated input) input 1021 (to read value refer to gpio1021)
 
In order to read digital input value use '''''cat''''' command.
 
cat /sys/class/gpio/gpio14/value
cat /sys/class/gpio/gpio15/value
cat /sys/class/gpio/gpio1021/value
 
To change input state use '''''echo''''' command where "1" is "dry" state and "0" is "wet" state.
 
echo 0 > /sys/class/gpio/gpio12/value
echo 1 > /sys/class/gpio/gpio38/value
 
When one Relay output is open, other one is closed, so turning on/off the output you will have to change value on both pins. For that '''''echo''''' command is used. Same principle applies to Latching Relay output.
 
echo 1 > /sys/class/gpio/gpio20/value & echo 0 > /sys/class/gpio/gpio22/value
echo 1 > /sys/class/gpio/gpio23/value & echo 0 > /sys/class/gpio/gpio21/value
 
====ADC (Analog Input)====
----
 
ADC (Analog input) can be read from different directory, '''''/sys/devices/qpnp-vadc-8/mpp4_vadc''''' also using '''''cat''''' command, but received Result value has to be divided by 126582 to get number in volts.
 
cat /sys/devices/qpnp-vadc-8/mpp4_vadc
 
====One-wire====
----
 
To read one-wire sensor data you will need to follow these steps:
 
Set one-wire sensor '''''value''''' to '''''1''''' using '''''ubus''''' command.
 
  ubus call ioman.gpio.onewire update '{"value":"1"}'
 
After that list out connected one-wire devices in directory '''''/sys/bus/w1/devices''''' with '''''ls''''' command.


  ls /sys/bus/w1/devices
You can invert an Input pin by clicking the on/off slider under the "Inversion" column or switch the state of an Output pin by clicking the on/off slider under the "State" column.


Choose sensor that you want to know values off and using '''''cat''''' command read them from '''''/sys/bus/w1/devices/&#60;device_name&#62;/w1_slave''''' directory.
User can <b> Rename </b> Input/Output interface by clicking on the "Edit" button.


  cat /sys/bus/w1/devices/&#60;device_name&#62;/w1_slave
{{#switch: {{{name}}}
| TRB141 = '''Note:''' When dry/wet input is not connected to anything - the state of level is undetermined.
| #default =}}
{{#switch: {{{name}}}|RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB141|TRB256 = 
'''Note:''' You can edit the adc/acl formula to customize values.


Custom I/O status labels for "Analog input":
[[File:Networking_manual_input_output_status_formula_adc0.png|border|class=tlt-border]]


| <!--    for other TRB1    -->
Custom I/O status labels for "Analog current loop":
The <b>Status</b> page displays the current states of the device input and output:
[[File:Networking_manual_input_output_status_formula_acl0.png|border|class=tlt-border]]
 
| #default =}}
[[File:Networking_trb14x_manual_input_output_status_v1.png|border|class=tlt-border]]
 
You can invert Input pin by clicking on slider in <b>Inversion</b> column and switch Output pin state by clicking on slider in <b>State</b> column.


===Status from command line===
===Status from command line===
----
----
You can also obtain the status of the input or output from the command line. List of ubus possible <b>values</b> in {{{name}}} devices:
You can also obtain the status of input and output pins via the command line (CLI or SSH). List of possible ubus values in {{{name}}} devices:
 
ioman.gpio.din1
ioman.gpio.dout1
 
Call command <b>ubus call <u>value</u> status </b>:
root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dout1 status
{
        "value": "0",
        "direction": "in",
        "bi_dir": false,
        "invert_input": false
}


<ul>
{{#switch: {{{series}}}
    <li><b>din1</b> is the input:
| TRB1 ={{#ifeq:{{{name}}}
        <ul>
  | TRB141 | {{Template:Networking_trb141_manual_input_output_status}}
            <li>"value": "<b>0</b>" means low level state.</li>
  | {{Template:Networking_{{lc:{{{series}}}}}_manual_input_output_status|name={{{name}}}}}
            <li>"value": "<b>1</b>" means high level state.</li>
  }}
        </ul>
| #default = {{Template:Networking_{{lc:{{{series}}}}}_manual_input_output_status|name={{{name}}}}}
    </li>
    <li><b>dout1</b> is the output:
        <ul>
            <li>"value": "<b>0</b>" means low level state.</li>
            <li>"value": "<b>1</b>" means high level state.</li>
        </ul>
    </li>
</ul>
}}
}}
| <!--    for rutx      -->
The <b>Status</b> page displays the current states of the device input and output:
[[File:Networking_rutx_manual_input_output_status_v2.png|border|class=tlt-border]]
You can invert Input pin by clicking on slider in <b>Inversion</b> column and switch Output pin state by clicking on slider in <b>State</b> column.
===Status from command line===
----
You can also obtain the status of the input or output from the command line. List of ubus possible <b>values</b> in {{{name}}} devices:
ioman.gpio.dio0
ioman.gpio.dio1


Call command <b>ubus call <u>value</u> status </b>:
{{#switch: {{{name}}}
root@Teltonika-{{{name}}}:~# ubus call ioman.gpio.dio0 status
| RUT300|RUT301|RUT360|TRB245|TRB246|TRB255|TRB140|TRB141|TRB142|TRB143|TRB145|TRB256|TRB160 = '''Note:''' Changes of configurable pin type from output to input (and reverse) could causes the issues where the specific type was set in configurations. Make sure that configurations do not contradict one another.
{
| #default =
        "value": "0",
        "direction": "in",
        "bi_dir": false,
        "invert_input": false
  }
 
<ul>
    <li><b>din1</b> is the input:
        <ul>
            <li>"value": "<b>0</b>" means low level state.</li>
            <li>"value": "<b>1</b>" means high level state.</li>
        </ul>
    </li>
    <li><b>dout1</b> is the output:
        <ul>
            <li>"value": "<b>0</b>" means low level state.</li>
            <li>"value": "<b>1</b>" means high level state.</li>
        </ul>
    </li>
</ul>
}}
}}


==Post/Get==
==Post/Get==


Enabling <b>Post/Get</b> will allow you to send HTTP POST/GET requests to device which controls the state of the output. The figure below is an example of the Post/Get configuration section and the table below provides information on the fields contained in that section:
Enabling <b>Post/Get</b> provides the possibility to control the state of an output via HTTP POST/GET requests. The figure below is an example of the Auth Settings section of the Post/Get page. It is used to turn Post/Get requests on or off and to set authentication parameters.


[[File:Networking_rutx_manual_input_output_post_get_v2.png]]
[[File:Networking_rutos_manual_input_output_post_get_auth_settings_v3.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 307: Line 153:
     <tr>
     <tr>
       <td>Enable</td>
       <td>Enable</td>
       <td>off | on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Turns Post/Get on or off.</td>
       <td>Turns Post/Get on or off.</td>
    </tr>
    <tr>
      <td>Access</td>
      <td>io_state {{!}} io_type {{!}} io_value {{!}} io_invert; default: <b>io_state, io_type, io_value, io_invert</b></td>
      <td>Accessible methods. It is considered that all methods are allowed if this list is empty.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 323: Line 174:
     <td>Confirm password</td>
     <td>Confirm password</td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Repeat the new password.</td>
         <td>Repeat the password for confirmation.</td>
     </tr>
     </tr>
</table>
</table>
<b>Note:</b> password fields are required to enable POST/GET funcionallity.


===Post/Get examples===
===Post/Get examples===
----
----
It is possible to turn the output on and off by using a valid HTTP POST/GET syntax. Use a web browser or any other compatible software to submit HTTP POST/GET strings to the device.
Use a web browser or any other compatible software to send HTTP POST/GET requests to the device.


Below is a table containing syntax examples of this usage:  
====Setting====
----
Changing states of various I/O is possible using requests. Below is a table containing syntax examples of this usage:  


<table class="nd-othertables_2">
<table class="nd-othertables_2">
Line 338: Line 193:
       <th style="width: 900px">POST/GET URL</th>
       <th style="width: 900px">POST/GET URL</th>
     </tr>
     </tr>
{{#ifeq:{{{configurableio}}}|1|
 
     <tr>
     <tr>
       <td>Turn Output state to high</td> <!--  another ifeq to change ip subnet according to trb14x...  -->
       <td>Turn Output state to high</td> <!--  another ifeq to change ip subnet according to trb14x...  -->
       <td><nowiki>http://192.168.</nowiki>{{#ifeq:{{{series}}}|TRB1|2|1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_state</b></span><nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|dio1}}<span style="color: #0054a6;"><b><nowiki>&state=on</nowiki></b></span></td>
       <td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_state</b></span><nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<span style="color: #0054a6;"><b><nowiki>&state=on</nowiki></b></span></td>
     </tr>
     </tr>
     <tr>
     <tr>
       <td>Turn Output state to low after 5 seconds for 3 seconds</td>
       <td>Turn Output state to low after 5 seconds for 3 seconds</td>
       <td><nowiki>http://192.168.</nowiki>{{#ifeq:{{{series}}}|TRB1|2|1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_state</b></span><nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|dio1}}&state=on<span style="color: #0054a6;"><b><nowiki>&delay=5</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=3</nowiki></b></span></td>
       <td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_state</b></span><nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<span style="color: #0054a6;"><b><nowiki>&delay=5</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=3</nowiki></b></span></td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Change Configurable Input/Output with pin3 to Output</td>
         <td>Check t_time parameter - time is set in miliseconds</td>
         <td><nowiki>http://192.168.</nowiki>{{#ifeq:{{{series}}}|TRB1|2|1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_type</b></span><nowiki>?username=user1&password=user1&</nowiki><span style="color: #0054a6;"><b>pin=dio1</b></span><span style="color: #3232ff;"><b><nowiki>&type=out</nowiki></b></span></td>
         <td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_state</b></span><nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}&state=on<span style="color: #0054a6;"><b><nowiki>&t_time=msec</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=5000</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=1000</nowiki></b></span></td>
     </tr>
     </tr>
|
     <tr>
     <tr>
      <td>Turn Output state to high</td>
        <td>Invert input</td>
      <td><nowiki>http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1</nowiki><span style="color: #0054a6;"><b><nowiki>&state=on</nowiki></b></span></td>
        <td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/io_invert?username=user1&password=user1&pin={{#ifeq:{{{series}}}|RUTX|din1|<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}>}}<span style="color: #0054a6;"><b><nowiki>&invert=<0/1> (0 - disable inversion/1 - enable inversion</nowiki></b></span></td>
     </tr>
     </tr>
{{#ifeq:{{{configurableio}}}|1|
     <tr>
     <tr>
      <td>Turn Output state to low after 5 seconds for 3 seconds</td>
        <td>Change Configurable Input/Output with pin3 to Output</td>
      <td><nowiki>http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on</nowiki><span style="color: #0054a6;"><b><nowiki>&delay=5</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=3</nowiki></b></span></td>
        <td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_type</b></span><nowiki>?username=user1&password=user1&</nowiki><span style="color: #0054a6;"><b>pin=dio0</b></span><span style="color: #3232ff;"><b><nowiki>&type=out</nowiki></b></span></td>
     </tr>
     </tr>
}}
||}}
   
 
</table>
</table>


<b>Overview</b>:
<b>Overview</b>:
<ul>
<ul>
     <li>192.168.{{#ifeq:{{{series}}}|TRB1|2|1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>
     <li>192.168.{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>
{{#ifeq:{{{configurableio}}}|1|<li>io_state or io_type - allows you to change IO state or type.</li>}}
{{#ifeq:{{{configurableio}}}|1|<li>io_state,io_type or io_invert- allows you to change IO state, type or invert cofigurable input.</li>}}
     <li>username - login name from Post/Get configuration.</li>
     <li>username - login name from Post/Get configuration.</li>
     <li>password- password from Post/Get configuration.</li>
     <li>password- password from Post/Get configuration.</li>
     <li>state - turn Output on or off.</li>
     <li>state - turn Output on or off.</li>
{{#ifeq:{{{configurableio}}}|1|<li>type - turn Configurable Input/Output to Input or Output.</li>}}
{{#ifeq:{{{configurableio}}}|1|<li>type - turn Configurable Input/Output to Input or Output.</li>}}
    <li>invert - enables inversion on/off (only works with inputs).</li>
     <li>delay - defines a delay (in seconds) after which the specified action will be performed.</li>
     <li>delay - defines a delay (in seconds) after which the specified action will be performed.</li>
     <li>time - defines a window of time during which the action will take place. For instance, if you post an <i>on</i> action while specifying <i>time=5</i>, the output will turn on and stay on for 5 seconds before turning off.</li>
     <li>time - defines a window of time during which the action will take place. For instance, if you post an <i>on</i> action while specifying <i>time=5</i>, the output will turn on and stay on for 5 seconds before turning off.</li>
Line 382: Line 238:
<b>Examples:</b>
<b>Examples:</b>


<ul>
* <b>Switch output to High:</b>
    <li><b>Switch output to High:</b><br><pre>curl -X GET "http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on"</pre></li>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on</nowiki>"
    <li><b>Switch output to Low after delay:</b><br><pre>curl -X GET "http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=off&delay=5"</pre></li>
* <b>Switch output to Low after delay:</b>
</ul>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=off&delay=5</nowiki>"


==Scheduler==
====Reading====
----
Getting the current state of various I/O is possible using requests. Usage is very similar to the examples above:


With the help of the output <b>Scheduler</b> you can configure a timetable of when the output should be enabled or disabled based on date and time.
<b>Examples:</b>
By default everything is unset.


{{#ifeq:{{{configurableio}}}|1|[[File:Networking_trb2_manual_input_output_output_scheduler_v1.png|border|class=tlt-border]]|[[File:Networking_rutx_manual_input_output_output_scheduler_v2.png|border|class=tlt-border]]}}
{{#ifeq:{{{configurableio}}}|1|* {{#switch:{{{name}}}|TRB245|TRB246|TRB255|TRB256 = <b>Read state of Configurable Input/Output PIN2/PIN3/PIN4:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio2</nowiki>" | #default = <b>Read state of Configurable Input/Output PIN3/PIN4:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"}}|
* <b>Read state of digital input/output:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din1</nowiki>"
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout1</nowiki>"}}
{{#ifeq:{{{analog}}}|1|* <b>Read state of analog input (in voltage mode):</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=adc0</nowiki>"|}}
{{#ifeq:{{{acl}}}|1|* <b>Read state of analog input (in current mode):</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=acl0</nowiki>"|}}
{{#ifeq:{{{dry}}}|1|* <b>Read state of Dry input PIN1:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi0</nowiki>"|}}
{{#ifeq:{{{wet}}}|1|* <b>Read state of Wet input PIN2:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi1</nowiki>"|}}
{{#ifeq:{{{isolated}}}|1|* <b>Read state of Isolated input:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=iio</nowiki>"|}}
{{#ifeq:{{{onewire}}}|1|* <b>Read state of One Wire:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=onewire</nowiki>"|}}
{{#ifeq:{{{relay}}}|1|* <b>Read state of Relay:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay0</nowiki>"|}}
{{#ifeq:{{{latchingrelay}}}|1|* <b>Read state of Latching Relay:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay1</nowiki>"|}}
{{#ifeq:{{{galvanic}}}|1|* <b>Read state of Galvanically isolated open collector output:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout2</nowiki>"|}}
{{#ifeq:{{{digitalpassive}}}|1|* <b>Read state of Digital input (only for passive sensors):</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5|TRB16=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din2</nowiki>"|}}


==I/O juggler==
<b>Posible responses:</b>
*<b>`io_value` for all pins</b>
* Bad username or password
* Pin does not exist
*<b>`io_value` for din1, dout1, dio1/2/3</b>
* 0
* 1{{#ifeq:{{{analog}}}|1|
*<b>`io_value` for adc0</b>
* float value|}}{{#ifeq:{{{acl}}}|1|
*<b>`io_value` for acl0</b>
* float value
* Inactive|}}{{#ifeq:{{{dry}}}|1|
*<b>`io_value` for dwi0</b>
* Dry Shorted
* Dry Open
* Wet Low level
* Wet High level|}}{{#ifeq:{{{wet}}}|1|
*<b>`io_value` for dwi1</b>
* Wet Low level
* Wet High level
* Dry Shorted
* Dry Open|}}{{#ifeq:{{{isolated}}}|1|
*<b>`io_value` for ii0</b>
* 0
* 1|}}{{#ifeq:{{{onewire}}}|1|
*<b>`io_value` for onewire</b>
* 0
* 1|}}{{#ifeq:{{{relay}}}|1|
*<b>`io_value` for relay0</b>
* 0
* 1|}}{{#ifeq:{{{latchingrelay}}}|1|
*<b>`io_value` for relay1</b>
* 0
* 1|}}{{#ifeq:{{{galvanic}}}|1|
*<b>`io_value` for dout2</b>
* 0
* 1|}}{{#ifeq:{{{digitalpassive}}}|1|
*<b>`io_value` for din2</b>
* 0
* 1|}}


The <b>I/O juggler</b> page is used create automated actions based on Input state and conditions.
==Scheduler==


===General===
The output <b>Scheduler</b> can be used to configure a timetable of when an output should be turned on or off, based on days of the week or month and hours of the day. The General Configuration section is used to turn the Output Scheduler on or off.
----


The <b>General</b> section allows you to create automated Actions based on selected Inputs and their trigger state.
[[File:Networking_rutos_manual_input_output_scheduler_general_configuration.png|border|class=tlt-border]]
The figure below is an example of Conditions section.


{{#switch:{{{series}}}
The Scheduler is configured in the form of <b>Instances</b>. A Scheduler Instance defines a time interval during which the state of an output associated with the instance will be set to "High". The Output Scheduler Instances list is empty by default. Click the 'Add' button in order to create a new Scheduler Instance:
| TRB1 = [[File:Networking_trb1_manual_input_output_iojuggler_general_v1.png]]
| TRB2 = [[File:Networking_trb2_manual_input_output_iojuggler_general_v1.png]]
|[[File:Networking_rutx_manual_input_output_iojuggler_general_v1.png]]}}


[[File:Networking_rutos_manual_input_output_scheduler_add_button.png|border|class=tlt-border]]


====Modify Input configuration====
After this you should be redirected to the configuration page for the newly added Instance which should look similar to this:
----


You can find explanation about fields in the table below this illustration.
[[File:Networking_rutos_manual_input_output_scheduler_instance_configuration_configurableio_{{{configurableio}}}.png|border|class=tlt-border]]
 
[[File:Networking_rutx_manual_input_output_iojuggler_general_modify_v1.png]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 424: Line 341:
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Enabled</td>
      <td>Enable</td>
        <td>off {{!}} on; default: <b>off</b> </td>
      <td>off | on; default: <b>off</b></td>
        <td>Changes current profile to specified one when action triggers.</td>
      <td>Turns the Scheduler Instance on or off.</td>
    </tr>
    <tr>
      <td>Pin</td>
      <td>output pin; default: <b>{{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (3)|Output (4)}}</b></td>
      <td>Output pin. The state of the selected output will be set to "High" during the time interval defined in the fields below.</td>
    </tr>
    <tr>
      <td>Interval Type</td>
      <td>Weekdays | <span style="color: red;">Month Days</span>; default: <b>Weekdays</b></td>
      <td>Selects the interval type for scheduler to use.</td>
    </tr>
    <tr>
      <td>Start Day</td>
      <td>[Monday..Sunday] | [1..31]; default: <b>Monday | 1</b></td>
      <td>The day that marks the start of the time interval.</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Trigger interval</td>
      <td>Start Time</td>
        <td>positive integer; default: <b>none</b></td>
      <td>hh:mm ([00..23]:[00..59]); default: <b>12:00</b></td>
        <td>Specifies what is the shortest amount of seconds between triggers.</td>
      <td>The hour and minute that mark the start of the time interval.</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Trigger</td>
      <td>End Day</td>
        <td>Rising {{!}} Falling {{!}} Both; default: <b>Rising</b> </td>
      <td>[Monday..Sunday] | [1..31]; default: <b>Tuesday | 1</b></td>
        <td>Specifies on which trigger state this rule will be activated.</td>
      <td>The day that marks the end of the time interval.</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Add actions</td>
      <td>End Time</td>
        <td>actions; default: <b>none</b> </td>
      <td>hh:mm ([00..23]:[00..59]); default: <b>12:00</b></td>
        <td>Specifies actions which have to be met for rule to be executed. Actions are optional.</td>
      <td>The hour and minute that mark the end of the time interval.</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Add conditions</td>
      <td><span style="color: red;">Force Last Day</span></td>
        <td>conditions; default: <b>none</b> </td>
      <td>off | on; default: <b>off</b></td>
        <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
      <td>Forces intervals to accept last day of month as a valid option if selected day does not exist during ongoing month. This field becomes visible only when 'Interval Type' is set to <i>Month Days</i>.</td>
     </tr>
     </tr>
</table>
</table>


===Actions===
A Scheduler Instance will not work unless you turn both the the Scheduler service and the individual instance on:
 
[[File:Networking_rutos_manual_input_output_scheduler_on_off_slider_configurableio_{{{configurableio}}}.png|border|class=tlt-border]]
 
==I/O Juggler==
 
The <b>I/O Juggler</b> is a feature that provides the possibility to create automated rules that perform certain actions based on Input state changes and other conditions. The operating sequence of I/O Juggler can be visualized as such:
 
[[File:Networking_rutos_manual_input_output_io_juggler_scheme_condition_mobile_{{{mobile}}}.png|border|class=tlt-border]]
 
When an Input Trigger occurs, the Input check to see if user-specified conditions are also met. If so, it executes a user-specified action.
----
----
For example, if we configure the I/O Juggler like this:


The <b>Actions</b> section lets you manage your created Actions for I/O Juggler inputs.  
<ul>
The figure below is an example of Actions section.
    <li><b>Trigger</b> - input state rising.</li>
    <li><b>Condition</b> - 8:00 AM - 5:00 PM.</li>
    <li><b>Action </b> - send email.</li>
</ul>


[[File:Networking_rutx_manual_input_output_iojuggler_actions_v1.png]]
The operating sequence would look like this:


====Modify action====
<ol>
    <li>A connected device raises the input state.</li>
    <li>This {{{name}}} device checks whether the current time is between 8:00 AM and 5:00 PM.
        <ul>
            <li><b>Yes</b> - {{{name}}} sends an email.</li>
            <li><b>No</b> - {{{name}}} doesn't send an email.</li>
        </ul>
    </li>
</ol>
----
----
You can specify multiple actions and multiple conditions for any I/O Juggler rule. Selecting conditions is optional. If there are no set or configured I/O Juggler conditions, the operating sequence is as such:


[[File:Networking_rutx_manual_input_output_iojuggler_actions_modify_v1.png]]
[[File:Networking_rutos_manual_input_output_io_juggler_scheme_mobile_{{{mobile}}}.png]]


Above is an example of what action configuration window looks like. Below is a table with detailed explanations on
===General===
how to configure the action and what each of the fields mean. To avoid redundancy, screenshots for the other actions
----
will not be provided, since the structures, syntax and the overall look of the configuration windows for each action
The <b>General</b> section is used to Input Trigger rules, which can perform a specified user-configured action when the Input state changes and when certain other user-configured conditions are met (<u>conditions are optional</u>).
are very similar. Instead, only tables containing information on how to edit each action will be provided.
 
Before you can use the I/O Juggler, you must turn it on first (off by default). This can be done by setting the 'Enable' slider to "on"{{#ifeq:{{{configurableio}}}|1|<span class="asterisk">*</span>|}}:


=====Profile=====
[[File:Networking_rutos_manual_input_output_io_juggler_general_enabled.png|border|class=tlt-border]]
{{#ifeq:{{{configurableio}}}|1|<span class="asterisk">*</span> Input rules for Configurable I/O will work only when the type of the pin is set to "input"|}}
====Input====
----
----
The <b>Input</b> is used to create Input Rules. An Input Rule is triggered by a user-specified input state change. When this trigger occurs, the device executes a specified command if certain specified conditions are met (conditions are optional).
The Input list is empty by default. To create a new Input Rule, look to the Add Input section at the bottom of the page; select an input and click the 'Add' button:
[[File:Networking_rutos_manual_input_output_io_juggler_general_input_add_button_juggler_input_{{{juggler_input}}}.png|border|class=tlt-border]]
After this you will be redirected to the configuration page for the newly added Rule, which should look similar to this:
[[File:Networking_rutos_manual_input_output_io_juggler_general_input_configuration_juggler_input_{{{juggler_input}}}.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 477: Line 445:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Type</td>
         <td>Enabled</td>
         <td>Profile</td>
         <td>off | on; default: <b>off</b> </td>
         <td>Changes current profile to specified one when action triggers.</td>
         <td>Changes current profile to specified one when action triggers.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Execution delay</td>
         <td>Trigger interval</td>
         <td>positive integer; default: <b>none</b></td>
         <td>integer [0..99999999]; default: <b>1</b></td>
         <td>How many seconds will pass before the action is excecuted after it's triggered.</td>
         <td>The shortest amount of time (in seconds) between two triggers. If the input is triggered more than once in a time period shorter than the value specified in this field, the device will react to the first trigger.</td>
    </tr>
    <tr>
        <td>Trigger</td>
        <td>Rising | Falling | Both; default: <b>Rising</b> </td>
        <td>Input state change that will trigger this rule.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Profile</td>
         <td>Add actions</td>
         <td>profile; default: <b>default</b> </td>
         <td>i/o juggler action(s); default: <b>none</b> </td>
         <td>Choose a profile that will be applied when the action triggers.</td>
         <td>Actions that will be executed by this rule when the specified trigger and conditions (optional) occur.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Add conditions</td>
         <td>Add conditions</td>
         <td>conditions; default: <b>none</b> </td>
         <td>i/o juggler conditions; default: <b>none</b> </td>
         <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
         <td>Conditions that have to be met for the rule to take action. Conditions are optional.</td>
     </tr>
     </tr>
</table>
</table>


===Actions===
----
The <b>Actions</b> section is used to manage and create new Actions that can be executed by the I/O Juggler Rules. The figure below is an example of the Actions section, which is empty by default.
[[File:Networking_rutos_manual_input_output_io_juggler_actions_actions.png|border|class=tlt-border]]
To create a new Action, look to the Add an Action section at the bottom of the page; enter a custom name, select an action type and click the 'Add' button:


=====Email=====
[[File:Networking_rutos_manual_input_output_io_juggler_actions_add_button.png|border|class=tlt-border]]
 
After this you will be redirected to the configuration page for the newly added Action, which should look similar to this (example for action 'Type: Reboot'):
 
[[File:Networking_rutos_manual_input_output_io_juggler_actions_configuration_reboot.png|border|class=tlt-border]]
 
<b>Action configuration</b> depends on the selected action 'Type'. Each Action can have one or multiple user-defined [[#Conditions|Conditions]] assigned to it. Actions that have Conditions assigned to them are executed only if the Conditions are met (a trigger occurrence is not enough to set off these actions). Assigning to Actions is optional.
 
You will find descriptions of each different action Type described on the sections below.
 
====Type: Email====
----
----
Sends an email to specified recipients. Requires an existing email account configuration on the device. Email accounts can be configured in the System → Administration → Recipients → [[{{{name}}}_Administration#Email_Accounts|Email Accounts]] page.
{{#switch: {{{name}}}
| RUTX12| RUTM12 =  [[File:Networking rutos manual input output io juggler actions email rutx12 v2.png|border|class=tlt-border]]
| RUTX10 = [[File:Networking_rutos_manual_input_output_io_juggler_actions_email_rutx10_v2.png|border|class=tlt-border]]
| #default = [[File:Networking rutos manual input output io juggler actions email v2.png|border|class=tlt-border]]
}}
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 506: Line 504:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
        <td>Type</td>
        <td>Email</td>
        <td>Sends email when action triggers.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 520: Line 513:
         <td>Text message</td>
         <td>Text message</td>
         <td>string; default: <b>none</b> </td>
         <td>string; default: <b>none</b> </td>
         <td>Text message to be sent in email. Below this field you can find device information and
         <td>Email body text. Below this field you can find special codes that begin with the '%' sign. Each code represents a piece information related to the status of the device. Include these codes in the Text message for dynamic information reports.</td>
        their codes, which can be included in messages to send device information.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Execution delay</td>
         <td>Execution delay</td>
         <td>positive integer; default: <b>none</b></td>
         <td>positive integer; default: <b>none</b></td>
         <td>How many seconds will pass before the action is excecuted after it's triggered.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before the action is executed.</td>
     </tr>
    </tr>{{#switch: {{{name}}}
| RUTX12| RUTM12 =
    <tr>
        <td>Modem</td>
        <td>Primary modem {{!}} Secondary modem; default: <b>Primary modem</b></td>
        <td>Modem, which is used to get information from.</td>
     </tr>|}}
     <tr>
     <tr>
         <td>Email user</td>
         <td>Email account</td>
         <td>email user; default: <b>none</b></td>
         <td>email account; default: <b>none</b></td>
         <td>Configured email user.</td>
         <td>Email account used to send the email. Email accounts can be configured in the System → Administration → Recipients → [[{{{name}}}_Administration#Email_Accounts|Email Accounts]] page.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Recipient's email address</td>
         <td>Recipient's email address</td>
         <td>string; default: <b>none</b></td>
         <td>email; default: <b>none</b></td>
         <td>Email receiver(s).</td>
         <td>Email address(es) of the message's receiver(s).</td>
    </tr>
    <tr>
        <td>Add conditions</td>
        <td>conditions; default: <b>none</b> </td>
        <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
     </tr>
     </tr>
</table>
</table>


{{#ifeq:{{{mobile}}}|0||
====Type: Output====
=====SMS=====
----
----
<table class="nd-mantable">
Changes the state of a selected output pin.
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
        <td>Type</td>
        <td>SMS</td>
        <td>Sends sms when action triggers.</td>
    </tr>
    <tr>
        <td>Text message</td>
        <td>string; default: <b>none</b> </td>
        <td>Text message to be sent in sms. Below this field you can find device information and
        their codes, which can be included in messages to send device information.</td>
    </tr>
    <tr>
        <td>Execution delay</td>
        <td>positive integer; default: <b>none</b></td>
        <td>How many seconds will pass before the action is excecuted after it's triggered.</td>
    </tr>
    <tr>
        <td>Recipients</td>
        <td><span style="color:red;">Single number</span> {{!}} <span style="color:blue;">Group</span>; default: <b>Single number</b></td>
        <td>How many recipients will get the message.</td>
    </tr>
    <tr>
        <td><span style="color:red;">Single number:</span> Recipient's phone number</td>
        <td>number; default: <b>none</b></td>
        <td>SMS receiver.</td>
    </tr>
    <tr>
        <td><span style="color:blue;">Group:</span> Phone group</td>
        <td>phone group; default: <b>none</b></td>
        <td>SMS receivers.</td>
    </tr>
    <tr>
        <td>Add conditions</td>
        <td>conditions; default: <b>none</b> </td>
        <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
    </tr>
</table>


<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.
[[File:Networking_rutos_manual_input_output_io_juggler_actions_output_configurableio_{{{configurableio}}}.png|border|class=tlt-border]]
}}


=====Output=====
----
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 602: Line 549:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
        <td>Type</td>
        <td>Output</td>
        <td>Changes Output state when action triggers.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Execution delay</td>
         <td>Execution delay</td>
         <td>positive integer; default: <b>none</b></td>
         <td>positive integer; default: <b>none</b></td>
         <td>How many seconds will pass before the action is excecuted after it's triggered.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before this Action is executed.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Control</td>
         <td>Control</td>
         <td>output; default: <b>Output(4)</b></td>
         <td>output; default: <b>{{#ifeq:{{{configurableio}}}|1|Configurable Input/Output (3)|Output (4)}}</b></td>
         <td>Specifies the output of which the state will be changed.</td>
         <td>Selects the output controlled by this Action.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Revert</td>
         <td>Revert</td>
         <td>integer; default: <b>0</b> </td>
         <td>integer; default: <b>0</b></td>
         <td>After how many seconds the state will revert. If left 0 or empty the state will not revert.</td>
         <td>After how many seconds the state will revert. If left as 0 or empty the state will not revert.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Maintain</td>
         <td>Maintain</td>
         <td>off | on; default: <b>on</b></td>
         <td>off | on; default: <b>on</b></td>
         <td>Maintain this IO state after reboot.</td>
         <td>When set to 'on', the output maintains its new state after reboot (the state is changed in the config file as well).</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Invert</td>
         <td>Invert</td>
         <td>off | on; default: <b>off</b></td>
         <td>off | on; default: <b>off</b></td>
         <td>On action inverts pin state.</td>
         <td>Inverts the state of the selected output, i.e., switches the output pin to a state that is opposite to its current one (high-to-low or low-to-high). This can be used instead of specifying a static state.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>State copying</td>
         <td>State copying</td>
         <td>off | on; default: <b>off</b></td>
         <td>off | on; default: <b>off</b></td>
         <td>Copies the state from selected input to selected output.</td>
         <td>Copies the state from the selected input and applies it to the selected output. This can be used instead of specifying a static state.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>State</td>
         <td>State</td>
         <td>High | Low; default: <b>High</b></td>
         <td>High | Low; default: <b>High</b></td>
         <td>Specifies what state the output pin will be set to.</td>
         <td>Specifies the state of the output pin that will be set by this Action.</td>
    </tr>
    <tr>
        <td>Add conditions</td>
        <td>conditions; default: <b>none</b> </td>
        <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
     </tr>
     </tr>
</table>
</table>


====Type: HTTP====
----
Executes a HTTP POST/GET request.
[[File:Networking_rutos_manual_input_output_io_juggler_actions_http_v2.png|border|class=tlt-border]]


=====HTTP=====
----
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 658: Line 598:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
        <td>Type</td>
        <td>HTTP</td>
        <td>Sends HTTP request when action triggers.</td>
    </tr>
    <tr>
        <td>Execution delay</td>
        <td>positive integer; default: <b>none</b></td>
        <td>How many seconds will pass before the action is excecuted after it's triggered.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Method</td>
         <td>Method</td>
         <td>Get {{!}} Post; default: <b>Get</b></td>
         <td>Get | Post; default: <b>Get</b></td>
         <td>Specifies the output of which the state will be changed.</td>
         <td>HTTP method to be used by this Action.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>URL</td>
         <td>URL</td>
         <td>string; default: <b>none</b> </td>
         <td>string; default: <b>none</b> </td>
         <td>URL to send request to.</td>
         <td>URL to send the HTTP Post/Get request to.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Verify</td>
         <td>Verify</td>
         <td>off | on; default: <b>off</b></td>
         <td>off | on; default: <b>off</b></td>
         <td>Verifies the validity of certificates, only works for https.</td>
         <td>Verifies the validity of certificates; only used with HTTPS.</td>
    </tr>
    <tr>
        <td>Alt. parameters mode</td>
        <td><span style="color:red">off</span> | <span style="color:blue">on</span>; default: <b>off</b></td>
        <td>Choose a different way to pass parameters. If method is POST parameters are passed in request body. If method is GET parameters are passed throught the URL.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Parameters</td>
         <td><span style="color:red">Parameters</span></td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Parameters and their value from device for usage in Post or Get requests.  
         <td>Parameters that are to be included the Post/Get request. Select a parameter (right drop-down box) and enter a custom name for it (left text box).</td>
{{#switch:{{{name}}}
    </tr>
| RUTX10 = Possible values: Time stamp, UNIX time, WAN MAC, Wired WAN IP, Network info, Product code, LAN MAC address, LAN IP address, Serial number, Current FW version, Monitoring status, Input Name, Input state change trigger </td>
    <tr>
| RUTX08 = Possible values: Time stamp, UNIX time, WAN MAC, Wired WAN IP, Network info, Product code, LAN MAC address, LAN IP address, Serial number, Current FW version, Monitoring status, Input Name, Input state change trigger </td>
        <td><span style="color:blue">Text message</span></td>
| Possible values: Time stamp, UNIX time, WAN MAC, Wired WAN IP, Network info, Product code, LAN MAC address, LAN IP address, Serial number, Current FW version, Monitoring status, Input Name, Input state change trigger, RSCP, ECIO, SIM slot in use, CELLID, RSRQ, SINR, RSRP, SIM State, SIM pin state, Modem model, IMSI, Modem serial number , Network State, Data connection state, Connection type, Mobile IP, Operator name, Signal strenght, IMEI, ICCID, Neighbour cells, Network serving.</td>
        <td>default: <b>Device name - %rn; Time stamp - %ts</b></td>
}}
        <td>Message to send.</td>
    </tr>
    <tr>
        <td>Custom headers</td>
        <td>string; default: <b>none</b></td>
        <td>Allows to add custom headers to the HTTP requests.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Add conditions</td>
         <td>Execution delay</td>
         <td>conditions; default: <b>none</b> </td>
         <td>positive integer; default: <b>none</b></td>
         <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before this Action is executed.</td>
     </tr>
     </tr>
</table>
</table>
====Type: Script====
----
Executes a custom, user-written shell script.
{{#switch: {{{name}}}
| RUTX10 = [[File:Networking_rutos_manual_input_output_io_juggler_actions_script_rutx10_v1.png|border|class=tlt-border]]
| #default = [[File:Networking_rutos_manual_input_output_io_juggler_actions_script.png|border|class=tlt-border]]
}}




=====Script=====
----
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 709: Line 656:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
        <td>Type</td>
        <td>Script</td>
        <td>Runs script when action triggers.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Execution delay</td>
         <td>Execution delay</td>
         <td>positive integer; default: <b>none</b></td>
         <td>positive integer; default: <b>none</b></td>
         <td>How many seconds will pass before the action is excecuted after it's triggered.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before this Action is executed.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Specify path</td>
         <td>Specify path</td>
         <td><span style="color:red;">Upload a script</span> {{!}} <span style="color:blue;">Specify path</span>; default: <b>Upload a cript</b></td>
         <td>Upload a script |Specify path; default: <b>Upload a script</b></td>
         <td>Selection to upload a script or specify its absolute path in device.</td>
         <td>Specifies whether the script should be uploaded from an external file or a path to an internal (on this device) script file should be specified.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:red;">Upload a script:</span> Custom script</td>
         <td>Custom script {{!}} Script file</td>
         <td>-(interactive button)</td>
         <td>-(interactive button) | filepath</td>
         <td>Shows file upload window on click.</td>
         <td>Shows file upload window on click or provides the possibility to specify a path to an internal script file. The name and selection type of this field depends on the value set in the 'Specify path' field.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:blue;">Specify path:</span> Script file</td>
         <td>Arguments</td>
         <td>string; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
        <td>Absolute path to script file in device.</td>
    </tr>
    <tr>
        <td>Arguments</td>
        <td>string; default: <b>none</b> </td>
         <td>Optional arguments which can be provided for the script. You can include device information with values given below this input field.</td>
         <td>Optional arguments which can be provided for the script. You can include device information with values given below this input field.</td>
    </tr>
    <tr>
        <td>Add conditions</td>
        <td>conditions; default: <b>none</b> </td>
        <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
     </tr>
     </tr>
</table>
</table>


<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.
====Type: Reboot====
----
Reboots the device.
 
[[File:Networking_rutos_manual_input_output_io_juggler_actions_reboot.png|border|class=tlt-border]]


=====Reboot=====
----
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 756: Line 690:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
        <td>Type</td>
        <td>Reboot</td>
        <td>Reboots device when action triggers.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Execution delay</td>
         <td>Execution delay</td>
         <td>positive integer; default: <b>none</b></td>
         <td>positive integer; default: <b>none</b></td>
         <td>How many seconds will pass before the action is excecuted after it's triggered.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before this Action is executed.</td>
    </tr>
    <tr>
        <td>Add conditions</td>
        <td>conditions; default: <b>none</b> </td>
        <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
     </tr>
     </tr>
</table>
</table>


{{#ifeq:{{{mobile}}}|0||
====Type: Profile====
    {{#ifeq:{{{series}}}|TRB1||
=====Change sim=====
----
----
Switches to using a specified Configuration Profile.
[[File:Networking_rutos_manual_input_output_io_juggler_actions_profile.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 783: Line 709:
       <th>Value</th>
       <th>Value</th>
       <th>Description</th>
       <th>Description</th>
    </tr>
    <tr>
        <td>Type</td>
        <td>Change sim</td>
        <td>Changes active sim card when action triggers.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Execution delay</td>
         <td>Execution delay</td>
         <td>positive integer; default: <b>none</b></td>
         <td>positive integer; default: <b>none</b></td>
         <td>How many seconds will pass before the action is excecuted after it's triggered.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before this Action is executed.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Flip</td>
         <td>Profile</td>
         <td><span style="color:red;">off</span> {{!}} on; default: <b>off</b></td>
         <td>profile; default: <b>default</b> </td>
         <td>Switches to a different sim card.</td>
         <td>Configuration Profile that will be applied by this Action. Configuration Profiles can be defined in the System → [[{{{name}}}_Profiles|Profiles]] page.</td>
    </tr>
    <tr>
        <td><span style="color:red;">Off:</span> Target</td>
        <td>Sim1 {{!}} Sim2; default: <b>Sim1</b></td>
        <td>Switches to a selected sim card.</td>
    </tr>
    <tr>
        <td>Add conditions</td>
        <td>conditions; default: <b>none</b> </td>
        <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
     </tr>
     </tr>
</table>
</table>


<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.
====Type: RMS====
    }}
}}
===Conditions===
----
 
The <b>Conditions</b> section lets you manage your created Conditions for I/O Juggler Actions.
The figure below is an example of Conditions section.
 
[[File:Networking_rutx_manual_input_output_iojuggler_conditions_v1.png]]
 
====Modify condition====
----
----
Enables or disables RMS service.


[[File:Networking_rutx_manual_input_output_iojuggler_conditions_modify_v1.png]]
[[File:Networking_rutos_manual_input_output_io_juggler_actions_rms_v1.png|border|class=tlt-border]]
 
Above is an example of what condition configuration window looks like. Below is a table with detailed explanations on
how to configure the condition and what each of the fields mean. To avoid redundancy, screenshots for the other conditions
will not be provided, since the structures, syntax and the overall look of the configuration windows for each condition
are very similar. Instead, only tables containing information on how to edit each condition will be provided.


=====Boolean group=====
----
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 841: Line 735:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Condition type</td>
         <td>Execution delay</td>
         <td>Boolean group</td>
         <td>positive integer; default: <b>none</b></td>
         <td>A type of condition.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before this Action is executed.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Boolean type</td>
         <td>Enable RMS</td>
         <td>AND {{!}} NAND {{!}} OR {{!}} NOR; default: <b>AND</b></td>
         <td>off {{!}} on; default: <b>off</b> </td>
        <td>Type of boolean condition.</td>
         <td>Specifies whether RMS service will be enabled or disabled with this action.</td>
    </tr>
    <tr>
        <td>Add conditions</td>
        <td>conditions; default: <b>none</b> </td>
         <td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
     </tr>
     </tr>
</table>
</table>
====Type: MQTT====
----
Executes a MQTT action.
{{#switch: {{{name}}}
| RUTX10 = [[File:Networking_rutos_manual_input_output_io_juggler_actions_mqtt_rutx10_v1.png|border|class=tlt-border]]
| #default = [[File:Networking rutos manual input output io juggler actions mqtt_v1.png|border|class=tlt-border]]
}}




=====I/O=====
----
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 867: Line 764:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Condition type</td>
         <td>Text message</td>
         <td>I/O</td>
         <td>string; default: <b>none</b> </td>
         <td>A type of condition.</td>
         <td>Below this field you can find special codes that begin with the '%' sign. Each code represents a piece information related to the status of the device. Include these codes in the Text message for dynamic information reports.
        </td>
    </tr>
    <tr>
        <td>Topic</td>
        <td>string; default: <b>none</b></td>
        <td>The name of the topic that the broker will subscribe to.</td>
    </tr>
    <tr>
        <td>Client ID</td>
        <td>string; default: <b>none</b></td>
        <td>Client ID to send with the data. If empty, a random client ID will be generated.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>I/O</td>
         <td>Hostname</td>
         <td>inputs/outputs; default: <b>Output(4)</b></td>
         <td>host | ip; default: <b>none</b> </td>
         <td>Specifies the I/O to which the condition is listening to.</td>
         <td>Broker’s IP address or hostname.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>State</td>
         <td>Port</td>
         <td>High {{!}} Low; default: <b>High</b> </td>
         <td>integer [0..65535]; default: <b>1883</b></td>
         <td>Specifies in what state the pin has to be.</td>
         <td>Broker's port number.</td>
     </tr>
     </tr>
</table>
{{#ifeq: {{{analog}}} | 1 |
=====Analog voltage=====
----
<table class="nd-mantable">
     <tr>
     <tr>
         <th>Field</th>
         <td>Keepalive</td>
      <th>Value</th>
        <td>positive integer; default: <b>none</b></td>
      <th>Description</th>
        <td>The number of seconds after which the broker should send a PING message to the client if no other messages have been exchanged in that time</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Condition type</td>
         <td>Qos</td>
         <td>Analog voltage</td>
         <td>At most once (0) | At least once (1) | Exactly once (2); default: <b>At most once (0)</b></td>
         <td>A type of condition.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before this Action is executed.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Condition</td>
         <td>Username</td>
         <td>Inside voltage {{!}} Outside voltage; default: <b>Inside voltage</b> </td>
         <td>string; default: <b>none</b></td>
         <td>Whether to evaluate the condition as true inside or outside the specified range.</td>
         <td>Username used for authentication to the Broker.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Input</td>
         <td>Password</td>
         <td>inputs; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Specifies the analog input to which the condition is listening to.</td>
         <td>Password used for authentication to the Broker.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Min voltage</td>
         <td>TLS</td>
         <td>positive float; default: <b>none</b></td>
         <td>off {{!}} <span style="color:blue">on</span>; default: <b>off</b></td>
         <td>Specifies minimum voltage of range.</td>
         <td>Select to enable TLS encryption.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Max voltage</td>
         <td><span style="color:blue">TLS Type</span></td>
         <td>positive float; default: <b>none</b></td>
         <td>Certificate based {{!}} Pre-Shared-Key based; default: <b>Certificate based</b></td>
         <td>Specifies magimum voltage of range.</td>
         <td>Type of TLS encryption.</td>
     </tr>
     </tr>
</table>
|}}
=====Minute=====
----
<table class="nd-mantable">
     <tr>
     <tr>
         <th>Field</th>
         <td><span style="color:blue">Certificate based:</span>Allow insecure connection</td>
      <th>Value</th>
        <td>off {{!}} on; default: <b>off</b></td>
      <th>Description</th>
        <td>Allow not verifying server authenticity.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Condition type</td>
         <td><span style="color:blue">Certificate based:</span>Certificate files from device</td>
         <td>Minute</td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>A type of condition.</td>
         <td>Choose this option if you want to select certificate files from device.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Inverted function</td>
         <td><span style="color:blue">Certificate based:</span>CA file</td>
         <td>off {{!}} on; default: <b>off</b> </td>
         <td>.crt file; default: <b>none</b></td>
         <td>Inverts the selected condition type. Makes the condition true if the time/date is outside the specified interval.</td>
         <td>Upload CA file.</td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Interval</td>
         <td><span style="color:blue">Certificate based:</span>Certificate file</td>
         <td><span style="color:red;">off</span> | <span style="color:blue;">on</span>; default: <b>off</b></td>
        <td>.crt file; default: <b>none</b></td>
         <td>Switches between a specific value and a time interval.</td>
         <td>TLS client or server certificate file.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:red;">Off:</span> Minute</td>
         <td><span style="color:blue">Certificate based:</span>Key file</td>
         <td>integer [0..59]; default: <b>none</b></td>
         <td>.key file; default: <b>none</b></td>
         <td>Specifies minute at which the action can occur.</td>
         <td>TLS client or server key file.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:blue ;">On:</span> Start minute</td>
         <td><span style="color:blue">Pre-Shared-Key based:</span>Pre-Shared-Key</td>
         <td>integer [0..59]; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Specifies starting minute of the interval at which the action can occur.</td>
         <td>The pre-shared-key in hex format with no leading “0x”.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:blue ;">On:</span> End minute</td>
         <td><span style="color:blue">Pre-Shared-Key based:</span>Identity</td>
         <td>integer [0..59]; default: <b>none</b></td>
         <td>string; default: <b>none</b></td>
         <td>Specifies ending minute of the interval at which the action can occur.</td>
         <td>Specify the Identity.</td>
     </tr>
     </tr>
</table>
</table>


<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.


=====Hour=====
{{#ifeq: {{{dualsim}}} | 1 |
====Type: SIM switch====
----
----
Switches to using the specified SIM card.
[[File:Networking_rutos_manual_input_output_io_juggler_actions_change_sim_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 973: Line 871:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Condition type</td>
         <td>Execution delay</td>
         <td>Hour</td>
         <td>positive integer; default: <b>none</b></td>
         <td>A type of condition.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before this Action is executed.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Inverted function</td>
         <td>Flip</td>
         <td>off {{!}} on; default: <b>off</b> </td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Inverts the selected condition type. Makes the condition true if the time/date is outside the specified interval.</td>
         <td>When set to 'on', switches to the opposite SIM card (the that is currently NOT in use). This can be used instead of selecting a specific SIM card to switch to.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Interval</td>
         <td>Enable primary option transfer</td>
         <td><span style="color:red;">off</span> | <span style="color:blue;">on</span>; default: <b>off</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Switches between a specific value and a time interval.</td>
         <td>Enables simd service to change primary card while switching sims </td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:red;">Off:</span> Hour</td>
         <td>Target</td>
         <td>integer [0..59]; default: <b>none</b></td>
         <td>SIM1 {{!}} SIM2; default: <b>SIM1</b></td>
         <td>Specifies hour at which the action can occur.</td>
         <td>Selects a SIM card to switch to. This field is visible only when the 'Flip' field is set to 'off'.</td>
    </tr>
    <tr>
        <td><span style="color:blue ;">On:</span> Start hour</td>
        <td>integer [0..59]; default: <b>none</b></td>
        <td>Specifies starting hour of the interval at which the action can occur.</td>
    </tr>
    <tr>
        <td><span style="color:blue ;">On:</span> End hour</td>
        <td>integer [0..59]; default: <b>none</b></td>
        <td>Specifies ending hour of the interval at which the action can occur.</td>
     </tr>
     </tr>
</table>
</table>
|}}
{{#ifeq: {{{mobile}}} | 1 |
====Type: SMS====
----
Sends an SMS message to specified recipients.


<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.
[[File:Networking_rutos_manual_input_output_io_juggler_actions_sms.png|border|class=tlt-border]]


=====Weekday=====
----
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 1,015: Line 906:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Condition type</td>
         <td>Text message</td>
         <td>Weekday</td>
         <td>string; default: <b>none</b> </td>
         <td>A type of condition.</td>
         <td>SMS body text. Below this field you can find special codes that begin with the '%' sign. Each code represents a piece information related to the status of the device. Include these codes in the Text message for dynamic information reports.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Inverted function</td>
         <td>Execution delay</td>
         <td>off {{!}} on; default: <b>off</b> </td>
         <td>positive integer; default: <b>none</b></td>
         <td>Inverts the selected condition type. Makes the condition true if the time/date is outside the specified interval.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before the action is executed.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Interval</td>
         <td>Recipients</td>
         <td><span style="color:red;">off</span> | <span style="color:blue;">on</span>; default: <b>off</b></td>
         <td>Single number {{!}} Group; default: <b>Single number</b></td>
         <td>Switches between a specific value and a time interval.</td>
         <td>Defines whether the SMS message will be sent to a single number or multiple numbers included in a user-configured Phone group. Phone groups can be configured in the System → Administration → Recipients → [[{{{name}}}_Administration#Phone_Groups|Phone Groups]] page.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:red;">Off:</span> Weekday</td>
         <td>Recipient's phone number {{!}} Phone group</td>
         <td>weekday; default: <b>Monday</b></td>
         <td>phone number {{!}} phone group; default: <b>none</b></td>
         <td>Specifies weekday at which the action can occur.</td>
         <td>Phone number of a single recipient or a Phone group of multiple recipients. The name and selection type of this field depends on the value set in the 'Recipients' field.</td>
    </tr>
</table>
|}}
{{#ifeq: {{{wifi}}} | 1 |
====Type: WiFi====
----
Sends an SMS message to specified recipients.
 
[[File:Networking_rutos_manual_input_output_io_juggler_actions_wifi_v1.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:blue ;">On:</span> Start weekday</td>
         <td>Execution delay</td>
         <td>weekday; default: <b>Monday</b></td>
         <td>positive integer; default: <b>none</b></td>
         <td>Specifies starting weekday of the interval at which the action can occur.</td>
         <td>A period of time (in seconds) which has to pass after a trigger event before the action is executed.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:blue ;">On:</span> End weekday</td>
         <td>Enable WiFi</td>
         <td>weekday; default: <b>Monday</b></td>
         <td>off {{!}} on; default: <b>off</b></td>
         <td>Specifies ending weekday of the interval at which the action can occur.</td>
         <td>Specifies whether all WiFi interfaces will be enabled/disabled with this action.</td>
     </tr>
     </tr>
</table>
</table>
|}}
===Conditions===
----
The <b>Conditions</b> section is used to manage and created Conditions for I/O Juggler Actions. The figure below is an example of the Conditions section, which is empty by default.
[[File:Networking_rutos_manual_input_output_io_juggler_conditions.png|border|class=tlt-border]]
To create a new Condition, look to the Add a Condition section; enter a custom name, select the Type of the Condition and click the 'Add' button.


<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.
[[File:Networking_rutos_manual_input_output_io_juggler_conditions_add_button.png|border|class=tlt-border]]


=====Month day=====
After this you should be redirected to the configuration page of the newly added Condition. You will find descriptions of each different Condition type described on the sections below.
 
====Condition type: I/O====
----
----
I/O Condition type tracks the state of a selected input or output pin and considers the Condition as MET if that pin is in a user-specified state.
[[File:Networking_rutos_manual_input_output_io_juggler_conditions_io_configurableio_{{{configurableio}}}.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 1,057: Line 978:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Condition type</td>
         <td>I/O</td>
         <td>Month day</td>
         <td>inputs/outputs; default: <b>Output(3)</b></td>
         <td>A type of condition.</td>
         <td>Specifies the I/O pin to which this Condition is listening to.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Month override</td>
         <td>State</td>
         <td>off {{!}} on; default: <b>off</b> </td>
         <td>High | Low; default: <b>High</b></td>
         <td>If the option is selected and the specified day is not in the month then the condition uses the last day of the month.</td>
         <td>Specifies in what state the pin has to be in in order for the Condition to be met.</td>
    </tr>
</table>
{{#ifeq: {{{analog}}} | 1 |
====Condition type: Analog voltage====
----
Analog voltage Condition type measures the value of the Analog input and checks whether it inside or outside the user-specified range.
 
[[File:Networking_rutos_manual_input_output_io_juggler_conditions_analog_voltage.png|border|class=tlt-border]]
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Interval</td>
         <td>Condition</td>
         <td><span style="color:red;">off</span> | <span style="color:blue;">on</span>; default: <b>off</b></td>
         <td>Inside voltage {{!}} Outside voltage; default: <b>Inside voltage</b> </td>
         <td>Switches between a specific value and a time interval.</td>
         <td>Whether to evaluate the condition as true inside or outside the specified range.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:red;">Off:</span> Day of the month</td>
         <td>Input</td>
         <td>integer [1..31]; default: <b>none</b></td>
         <td>inputs; default: <b>none</b></td>
         <td>Specifies day of the month at which the action can occur.</td>
         <td>Specifies the analog input to which the condition is listening to.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:blue ;">On:</span> Start day of the month</td>
         <td>Min voltage</td>
         <td>integer [1..31]; default: <b>none</b></td>
         <td>positive float; default: <b>none</b></td>
         <td>Specifies starting day of the interval of the month at which the action can occur.</td>
         <td>Specifies minimum voltage of range.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td><span style="color:blue ;">On:</span> End day of the month</td>
         <td>Max voltage</td>
         <td>integer [1..31]; default: <b>none</b></td>
         <td>positive float; default: <b>none</b></td>
         <td>Specifies ending day of the interval of the month at which the action can occur.</td>
         <td>Specifies magimum voltage of range.</td>
     </tr>
     </tr>
</table>
</table>
|}}
====Condition type: Boolean group====
----
Boolean Group will evaluate two or more existing conditions based on selected Boolean type. A Boolean Group condition will considered as MET based on the outcome of the evaluation performed along with one of the available Boolean types:
<ul>
    <li><b>AND</b> - all selected conditions evaluate as TRUE.</li>
    <li><b>NAND</b> - at least one selected condition evaluates as FALSE.</li>
    <li><b>OR</b> - at least one selected condition evaluates as TRUE.</li>
    <li><b>NOR</b> - none of the selected conditions evaluate as TRUE.</li>
</ul>


<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.
For example, if we have two time Conditions (hour and minute) and a third Condition of Boolean group: AND, both Conditions 1 & 2 have to be met for Condition 3 to be evaluated as TRUE.


=====Year=====
[[File:Networking_rutos_manual_input_output_io_juggler_boolean_group_scheme_true.png|border|class=tlt-border]]
 
In this case, if at least one condition is no longer met, the Boolean group: AND Condition is evaluated as FALSE.
 
[[File:Networking_rutos_manual_input_output_io_juggler_boolean_group_scheme_false.png|border|class=tlt-border]]
----
----
Below is an example of Condition type: Boolean group configuration.
[[File:Networking_rutos_manual_input_output_io_juggler_conditions_boolean_group.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
     <tr>
     <tr>
Line 1,099: Line 1,053:
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Condition type</td>
         <td>Boolean type</td>
         <td>Year</td>
         <td>AND | NAND | OR | NOR; default: <b>AND</b></td>
         <td>A type of condition.</td>
         <td>Type of boolean condition.</td>
     </tr>
     </tr>
     <tr>
     <tr>
         <td>Inverted function</td>
         <td>Add conditions</td>
         <td>off {{!}} on; default: <b>off</b> </td>
         <td>conditions; default: <b>none</b> </td>
        <td>Inverts the selected condition type. Makes the condition true if the time/date is outside the specified interval.</td>
         <td>Specifies conditions which have to be met for action to occur.</td>
    </tr>
    <tr>
        <td>Interval</td>
        <td><span style="color:red;">off</span> | <span style="color:blue;">on</span>; default: <b>off</b></td>
        <td>Switches between a specific value and a time interval.</td>
    </tr>
    <tr>
        <td><span style="color:red;">Off:</span> Day of the year</td>
        <td>integer [1..366]; default: <b>none</b></td>
        <td>Specifies day of the year at which the action can occur.</td>
    </tr>
    <tr>
        <td><span style="color:blue ;">On:</span> Start day of the year</td>
        <td>integer [1..366]; default: <b>none</b></td>
        <td>Specifies starting day of the interval of the year at which the action can occur.</td>
    </tr>
    <tr>
        <td><span style="color:blue ;">On:</span> End day of the year</td>
        <td>integer [1..366]; default: <b>none</b></td>
         <td>Specifies ending day of the interval of the year at which the action can occur.</td>
     </tr>
     </tr>
</table>
</table>


<b>Note</b>: this table has coloring scheme to indicate which fields can be seen with different configuration.


[[Category:{{{name}}}<nowiki> Services section]]</nowiki>
 
====Condition types: Date/Time====
----
Lastly, you can configure Conditions based on date and time. Date/time Conditions can be configured based on:
 
<ul>
    <li><b>Minute</b> of the hour</li>
    <li><b>Hour</b> of the day</li>
    <li><b>Day</b> of the <b>Week</b></li>
    <li><b>Day</b> of the <b>Month</b></li>
    <li><b>Day</b> of the <b>Year</b></li>
</ul>
 
[[File:Networking_rutos_manual_input_output_io_juggler_conditions_date_time.png|border|class=tlt-border]]
 
Each type can be configured in two distinct ways:
 
<ol>
    <li><b>Specific time</b> - configured as a single value which defines the exact time when the Condition is considered as TRUE. e.g.:
        <ul>
            <li>Hour: <b>8</b></li>
            <li>Day of Month: <b>1</b></li>
        </ul>
    </li>
    <li><b>Time interval</b> - configured with a start and an end value which define a window of time during which the Condition is considered as TRUE. e.g.:
        <ul>
            <li>Hours: <b>8-12</b></li>
            <li>Days of Month: <b>1-12</b></li>
        </ul>
    </li>
</ol>
 
[[Category:{{{name}}} Services section]]

Latest revision as of 11:46, 1 October 2024

The information in this page is updated in accordance with firmware version .


Summary

Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events.

This chapter of the user manual provides an overview of the Input/Output section for {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Physical characteristics and I/O pin mapping

Electrical characteristics and I/O pin mapping information are presented below.

Power Socket Pinout

[[File:Networking_rutos_manual_input_output_power_socket_pinout_configurableio_{{{configurableio}}}.png]]

  • Power: {{{input_volts}}} VDC positive (+).
  • Ground: negative/ground (-).
  • Input: digital non-isolated input.
    • logical low level: 0 - 5 V;
    • logical high level: 8 - 30 V.
  • Output: digital open collector (OC) output; 30 V, 300 mA.

Status

The Status page displays the current states of the device's input and output pins:

[[File:Networking_{{{series}}}_manual_input_output_status.png|border|class=tlt-border]]

You can invert an Input pin by clicking the on/off slider under the "Inversion" column or switch the state of an Output pin by clicking the on/off slider under the "State" column.

User can Rename Input/Output interface by clicking on the "Edit" button.



Status from command line

You can also obtain the status of input and output pins via the command line (CLI or SSH). List of possible ubus values in {{{name}}} devices:

{{Template:Networking_{{{series}}}_manual_input_output_status|name={{{name}}}}}


Post/Get

Enabling Post/Get provides the possibility to control the state of an output via HTTP POST/GET requests. The figure below is an example of the Auth Settings section of the Post/Get page. It is used to turn Post/Get requests on or off and to set authentication parameters.

Field Value Description
Enable off | on; default: off Turns Post/Get on or off.
Access io_state | io_type | io_value | io_invert; default: io_state, io_type, io_value, io_invert Accessible methods. It is considered that all methods are allowed if this list is empty.
Username string; default: none Username used for authentication in POST/GET queries.
Password string; default: none Password used for authentication in POST/GET queries.
Confirm password string; default: none Repeat the password for confirmation.

Note: password fields are required to enable POST/GET funcionallity.

Post/Get examples

Use a web browser or any other compatible software to send HTTP POST/GET requests to the device.

Setting

Changing states of various I/O is possible using requests. Below is a table containing syntax examples of this usage:

Action POST/GET URL
Turn Output state to high http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=<dio0/dio1>&state=on
Turn Output state to low after 5 seconds for 3 seconds http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=<dio0/dio1>&state=on&delay=5&time=3
Check t_time parameter - time is set in miliseconds http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=<dio0/dio1>&state=on&t_time=msec&time=5000&time=1000
Invert input http://192.168.1.1/cgi-bin/io_invert?username=user1&password=user1&pin=<dio0/dio1>&invert=<0/1> (0 - disable inversion/1 - enable inversion

Overview:

  • 192.168.1.1 - device default LAN IP address; replace it in accordance with your own configuration.
  • username - login name from Post/Get configuration.
  • password- password from Post/Get configuration.
  • state - turn Output on or off.
  • invert - enables inversion on/off (only works with inputs).
  • delay - defines a delay (in seconds) after which the specified action will be performed.
  • time - defines a window of time during which the action will take place. For instance, if you post an on action while specifying time=5, the output will turn on and stay on for 5 seconds before turning off.

Delay and time parameters can be used together. For example, if delay is 10, time is 5, action is on, then 10 seconds after the execution of the command, the output will switch to on (or stay in on state if it was already that way), then after 5 more seconds it will switch to off state. In this case the overall command execution time is 15 seconds.

To use Post/Get via SSH instead of a browser, you may want to use the curl -X command. Simply add the same URL command in between quotes and specify the HTTP method.

Examples:

  • Switch output to High:
curl -X GET "http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on"
  • Switch output to Low after delay:
curl -X GET "http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=off&delay=5"

Reading

Getting the current state of various I/O is possible using requests. Usage is very similar to the examples above:

Examples:

  • Read state of digital input/output:
curl -X GET "http://192.168.1.1/cgi-bin/io_value?username=user1&password=user1&pin=din1"
curl -X GET "http://192.168.1.1/cgi-bin/io_value?username=user1&password=user1&pin=dout1"






Posible responses:

  • `io_value` for all pins
* Bad username or password
* Pin does not exist
  • `io_value` for din1, dout1, dio1/2/3
* 0
* 1

Scheduler

The output Scheduler can be used to configure a timetable of when an output should be turned on or off, based on days of the week or month and hours of the day. The General Configuration section is used to turn the Output Scheduler on or off.

The Scheduler is configured in the form of Instances. A Scheduler Instance defines a time interval during which the state of an output associated with the instance will be set to "High". The Output Scheduler Instances list is empty by default. Click the 'Add' button in order to create a new Scheduler Instance:

After this you should be redirected to the configuration page for the newly added Instance which should look similar to this:

[[File:Networking_rutos_manual_input_output_scheduler_instance_configuration_configurableio_{{{configurableio}}}.png|border|class=tlt-border]]

Field Value Description
Enable off | on; default: off Turns the Scheduler Instance on or off.
Pin output pin; default: Output (4) Output pin. The state of the selected output will be set to "High" during the time interval defined in the fields below.
Interval Type Weekdays | Month Days; default: Weekdays Selects the interval type for scheduler to use.
Start Day [Monday..Sunday] | [1..31]; default: Monday | 1 The day that marks the start of the time interval.
Start Time hh:mm ([00..23]:[00..59]); default: 12:00 The hour and minute that mark the start of the time interval.
End Day [Monday..Sunday] | [1..31]; default: Tuesday | 1 The day that marks the end of the time interval.
End Time hh:mm ([00..23]:[00..59]); default: 12:00 The hour and minute that mark the end of the time interval.
Force Last Day off | on; default: off Forces intervals to accept last day of month as a valid option if selected day does not exist during ongoing month. This field becomes visible only when 'Interval Type' is set to Month Days.

A Scheduler Instance will not work unless you turn both the the Scheduler service and the individual instance on:

[[File:Networking_rutos_manual_input_output_scheduler_on_off_slider_configurableio_{{{configurableio}}}.png|border|class=tlt-border]]

I/O Juggler

The I/O Juggler is a feature that provides the possibility to create automated rules that perform certain actions based on Input state changes and other conditions. The operating sequence of I/O Juggler can be visualized as such:

[[File:Networking_rutos_manual_input_output_io_juggler_scheme_condition_mobile_{{{mobile}}}.png|border|class=tlt-border]]

When an Input Trigger occurs, the Input check to see if user-specified conditions are also met. If so, it executes a user-specified action.

For example, if we configure the I/O Juggler like this:

  • Trigger - input state rising.
  • Condition - 8:00 AM - 5:00 PM.
  • Action - send email.

The operating sequence would look like this:

  1. A connected device raises the input state.
  2. This {{{name}}} device checks whether the current time is between 8:00 AM and 5:00 PM.
    • Yes - {{{name}}} sends an email.
    • No - {{{name}}} doesn't send an email.

You can specify multiple actions and multiple conditions for any I/O Juggler rule. Selecting conditions is optional. If there are no set or configured I/O Juggler conditions, the operating sequence is as such:

[[File:Networking_rutos_manual_input_output_io_juggler_scheme_mobile_{{{mobile}}}.png]]

General

The General section is used to Input Trigger rules, which can perform a specified user-configured action when the Input state changes and when certain other user-configured conditions are met (conditions are optional).

Before you can use the I/O Juggler, you must turn it on first (off by default). This can be done by setting the 'Enable' slider to "on":

Input

The Input is used to create Input Rules. An Input Rule is triggered by a user-specified input state change. When this trigger occurs, the device executes a specified command if certain specified conditions are met (conditions are optional).

The Input list is empty by default. To create a new Input Rule, look to the Add Input section at the bottom of the page; select an input and click the 'Add' button:

[[File:Networking_rutos_manual_input_output_io_juggler_general_input_add_button_juggler_input_{{{juggler_input}}}.png|border|class=tlt-border]]

After this you will be redirected to the configuration page for the newly added Rule, which should look similar to this:

[[File:Networking_rutos_manual_input_output_io_juggler_general_input_configuration_juggler_input_{{{juggler_input}}}.png|border|class=tlt-border]]

Field Value Description
Enabled off | on; default: off Changes current profile to specified one when action triggers.
Trigger interval integer [0..99999999]; default: 1 The shortest amount of time (in seconds) between two triggers. If the input is triggered more than once in a time period shorter than the value specified in this field, the device will react to the first trigger.
Trigger Rising | Falling | Both; default: Rising Input state change that will trigger this rule.
Add actions i/o juggler action(s); default: none Actions that will be executed by this rule when the specified trigger and conditions (optional) occur.
Add conditions i/o juggler conditions; default: none Conditions that have to be met for the rule to take action. Conditions are optional.

Actions

The Actions section is used to manage and create new Actions that can be executed by the I/O Juggler Rules. The figure below is an example of the Actions section, which is empty by default.

To create a new Action, look to the Add an Action section at the bottom of the page; enter a custom name, select an action type and click the 'Add' button:

After this you will be redirected to the configuration page for the newly added Action, which should look similar to this (example for action 'Type: Reboot'):

Action configuration depends on the selected action 'Type'. Each Action can have one or multiple user-defined Conditions assigned to it. Actions that have Conditions assigned to them are executed only if the Conditions are met (a trigger occurrence is not enough to set off these actions). Assigning to Actions is optional.

You will find descriptions of each different action Type described on the sections below.

Type: Email

Sends an email to specified recipients. Requires an existing email account configuration on the device. Email accounts can be configured in the System → Administration → Recipients → [[{{{name}}}_Administration#Email_Accounts|Email Accounts]] page.

Field Value Description
Subject string; default: none Subject of email.
Text message string; default: none Email body text. Below this field you can find special codes that begin with the '%' sign. Each code represents a piece information related to the status of the device. Include these codes in the Text message for dynamic information reports.
Execution delay positive integer; default: none A period of time (in seconds) which has to pass after a trigger event before the action is executed.
Email account email account; default: none Email account used to send the email. Email accounts can be configured in the System → Administration → Recipients → [[{{{name}}}_Administration#Email_Accounts|Email Accounts]] page.
Recipient's email address email; default: none Email address(es) of the message's receiver(s).

Type: Output

Changes the state of a selected output pin.

[[File:Networking_rutos_manual_input_output_io_juggler_actions_output_configurableio_{{{configurableio}}}.png|border|class=tlt-border]]

Field Value Description
Execution delay positive integer; default: none A period of time (in seconds) which has to pass after a trigger event before this Action is executed.
Control output; default: Output (4) Selects the output controlled by this Action.
Revert integer; default: 0 After how many seconds the state will revert. If left as 0 or empty the state will not revert.
Maintain off | on; default: on When set to 'on', the output maintains its new state after reboot (the state is changed in the config file as well).
Invert off | on; default: off Inverts the state of the selected output, i.e., switches the output pin to a state that is opposite to its current one (high-to-low or low-to-high). This can be used instead of specifying a static state.
State copying off | on; default: off Copies the state from the selected input and applies it to the selected output. This can be used instead of specifying a static state.
State High | Low; default: High Specifies the state of the output pin that will be set by this Action.

Type: HTTP

Executes a HTTP POST/GET request.

Field Value Description
Method Get | Post; default: Get HTTP method to be used by this Action.
URL string; default: none URL to send the HTTP Post/Get request to.
Verify off | on; default: off Verifies the validity of certificates; only used with HTTPS.
Alt. parameters mode off | on; default: off Choose a different way to pass parameters. If method is POST parameters are passed in request body. If method is GET parameters are passed throught the URL.
Parameters string; default: none Parameters that are to be included the Post/Get request. Select a parameter (right drop-down box) and enter a custom name for it (left text box).
Text message default: Device name - %rn; Time stamp - %ts Message to send.
Custom headers string; default: none Allows to add custom headers to the HTTP requests.
Execution delay positive integer; default: none A period of time (in seconds) which has to pass after a trigger event before this Action is executed.

Type: Script

Executes a custom, user-written shell script.


Field Value Description
Execution delay positive integer; default: none A period of time (in seconds) which has to pass after a trigger event before this Action is executed.
Specify path Upload a script |Specify path; default: Upload a script Specifies whether the script should be uploaded from an external file or a path to an internal (on this device) script file should be specified.
Custom script | Script file -(interactive button) | filepath Shows file upload window on click or provides the possibility to specify a path to an internal script file. The name and selection type of this field depends on the value set in the 'Specify path' field.
Arguments string; default: none Optional arguments which can be provided for the script. You can include device information with values given below this input field.

Type: Reboot

Reboots the device.

Field Value Description
Execution delay positive integer; default: none A period of time (in seconds) which has to pass after a trigger event before this Action is executed.

Type: Profile

Switches to using a specified Configuration Profile.

Field Value Description
Execution delay positive integer; default: none A period of time (in seconds) which has to pass after a trigger event before this Action is executed.
Profile profile; default: default Configuration Profile that will be applied by this Action. Configuration Profiles can be defined in the System → [[{{{name}}}_Profiles|Profiles]] page.

Type: RMS

Enables or disables RMS service.

Field Value Description
Execution delay positive integer; default: none A period of time (in seconds) which has to pass after a trigger event before this Action is executed.
Enable RMS off | on; default: off Specifies whether RMS service will be enabled or disabled with this action.

Type: MQTT

Executes a MQTT action.


Field Value Description
Text message string; default: none Below this field you can find special codes that begin with the '%' sign. Each code represents a piece information related to the status of the device. Include these codes in the Text message for dynamic information reports.
Topic string; default: none The name of the topic that the broker will subscribe to.
Client ID string; default: none Client ID to send with the data. If empty, a random client ID will be generated.
Hostname host | ip; default: none Broker’s IP address or hostname.
Port integer [0..65535]; default: 1883 Broker's port number.
Keepalive positive integer; default: none The number of seconds after which the broker should send a PING message to the client if no other messages have been exchanged in that time
Qos At most once (0) | At least once (1) | Exactly once (2); default: At most once (0) A period of time (in seconds) which has to pass after a trigger event before this Action is executed.
Username string; default: none Username used for authentication to the Broker.
Password string; default: none Password used for authentication to the Broker.
TLS off | on; default: off Select to enable TLS encryption.
TLS Type Certificate based | Pre-Shared-Key based; default: Certificate based Type of TLS encryption.
Certificate based:Allow insecure connection off | on; default: off Allow not verifying server authenticity.
Certificate based:Certificate files from device off | on; default: off Choose this option if you want to select certificate files from device.
Certificate based:CA file .crt file; default: none Upload CA file.
Certificate based:Certificate file .crt file; default: none TLS client or server certificate file.
Certificate based:Key file .key file; default: none TLS client or server key file.
Pre-Shared-Key based:Pre-Shared-Key string; default: none The pre-shared-key in hex format with no leading “0x”.
Pre-Shared-Key based:Identity string; default: none Specify the Identity.




Conditions

The Conditions section is used to manage and created Conditions for I/O Juggler Actions. The figure below is an example of the Conditions section, which is empty by default.

To create a new Condition, look to the Add a Condition section; enter a custom name, select the Type of the Condition and click the 'Add' button.

After this you should be redirected to the configuration page of the newly added Condition. You will find descriptions of each different Condition type described on the sections below.

Condition type: I/O

I/O Condition type tracks the state of a selected input or output pin and considers the Condition as MET if that pin is in a user-specified state.

[[File:Networking_rutos_manual_input_output_io_juggler_conditions_io_configurableio_{{{configurableio}}}.png|border|class=tlt-border]]

Field Value Description
I/O inputs/outputs; default: Output(3) Specifies the I/O pin to which this Condition is listening to.
State High | Low; default: High Specifies in what state the pin has to be in in order for the Condition to be met.

Condition type: Boolean group

Boolean Group will evaluate two or more existing conditions based on selected Boolean type. A Boolean Group condition will considered as MET based on the outcome of the evaluation performed along with one of the available Boolean types:

  • AND - all selected conditions evaluate as TRUE.
  • NAND - at least one selected condition evaluates as FALSE.
  • OR - at least one selected condition evaluates as TRUE.
  • NOR - none of the selected conditions evaluate as TRUE.

For example, if we have two time Conditions (hour and minute) and a third Condition of Boolean group: AND, both Conditions 1 & 2 have to be met for Condition 3 to be evaluated as TRUE.

In this case, if at least one condition is no longer met, the Boolean group: AND Condition is evaluated as FALSE.

Below is an example of Condition type: Boolean group configuration.

Field Value Description
Boolean type AND | NAND | OR | NOR; default: AND Type of boolean condition.
Add conditions conditions; default: none Specifies conditions which have to be met for action to occur.


Condition types: Date/Time

Lastly, you can configure Conditions based on date and time. Date/time Conditions can be configured based on:

  • Minute of the hour
  • Hour of the day
  • Day of the Week
  • Day of the Month
  • Day of the Year

Each type can be configured in two distinct ways:

  1. Specific time - configured as a single value which defines the exact time when the Condition is considered as TRUE. e.g.:
    • Hour: 8
    • Day of Month: 1
  2. Time interval - configured with a start and an end value which define a window of time during which the Condition is considered as TRUE. e.g.:
    • Hours: 8-12
    • Days of Month: 1-12

[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_input_output&oldid=133270"