Template:Networking rut2xx firmware change log legacy

RUT2XX_R_00.01.14.7 | 2023.05.19

• Fixes:
  • Fixed CVE-2023-32349 vulnerability

RUT2XX_R_00.01.14.6 | 2022.08.03

• Fixes:
  • Enhanced SMS Utilities service security

RUT2XX_R_00.01.14.5 | 2021.12.09

• New features:
  • DFOTA modem upgrade system for Quectel modems

• Fixes:
  • Fixed mobile MTU setting
  • Fixed incorrect QMI calls to modem
  • Increased buffer size for AT+CGDCONT output
  • Fixed persistence of DMZ firewall rules when loading Firewall General page

RUT2XX_R_00.01.14.4 | 2021.10.11

• New features:
  • Added MeigLink SLM750-VAU support
  • Added ping to DNS feature for mobile

• Fixes:
  • Patched CVE-2021-33909 vulnerability
  • Patched CVE-2019-14834 vulnerability
  • Patched CVE-2021-37600 vulnerability
  • Fixed VoLTE configuration for EC25-V modules
  • Fixed seting band issues
  • Fixed RMS rscp, ecio, rsrp, sinr and rsrq values

RUT2XX_R_00.01.14.3 | 2021.08.17

• New features:
  • Added MeigLink SLM750-VSA and SLM750-VJ support
  • Added MeigLink SLM750-VJ manual frequency band selection
  • Added MQTT Modbus Gateway keep alive option

• Improvements:
  • Added conntrack flush after IPsec connection

• Fixes:
  • Fixed hardware information config corruption when applying backup
  • Fixed backup archive validation
  • Fixed redirecting to correct IP address after firmware upgrade with keep settings
  • Fixed Modbus Master Alarms enabling

RUT2XX_R_00.01.14.1 | 2021.07.02

• New features:
  • MeigLink SLM750 Australian module support

• Improvements:
  • Added CallFailed error handling
  • Updated APN database with OTA BELL ME operator APN
  • Added Client ID option to Data to Server
  • Added band selection support for Meiglink SLM750
  • Added band parsing to mobile library
  • OpenSSL updated to version 1.1.1k

• Fixes:
  • Fixed signal strength LED handling for Meiglink modems
  • Fixed backup generating without packages
  • Fixed service mode handling for Meiglink SLM750 modems
  • Fixed band handling when switching service modes
  • Fixed SMS storage swap to modem when connection type changed from QMI to PPP
  • Fixed IPsec Passthrough function handling
  • Fixed Package Manager package install crash on reboot
  • Fixed modem FW version show for Meiglink SLM750
  • Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
  • Fixed DDNS hostname, username and password fields not showing when custom service is chosen
  • Fixed IPSec Pre-shared key option validation
  • Added security Wireless fixes for the FragAttacks vulnerabilities

RUT2XX_R_00.01.14 | 2021.03.23

• New features:
  • PPPoE wired WAN
  • WiFi Multiple AP configuration page

• Improvements:
  • Added SHA1 HMAC hash support to dropbear (SSH server/client)
  • Updated libpcap to version 19.1
  • Updated sqlite3 to version 3.33
  • Updated curl to version 7.74
  • Updated ncurses to version 6.2
  • Updated pcre to version 8.44
  • Updated iptables to version 1.6.2
  • Added hard request, alarm and slave limits to MODBUS TCP Master
  • Added USB ZLP flag to avoid mobile network loss
  • Added new gsmctl command that returns operator names
  • Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically

• Fixes:
  • Fixed CVE-2019-9755
  • Fixed CVE-2018-16789
  • Fixed CVE-2020-12762
  • Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links)
  • Fixed revision buffer size for Operator Control
  • Fixed operator selection logic
  • Fixed default PPTP route option handling
  • Fixed display of DDNS Hostname, Username and Password options when custom service is selected
  • Fixed incorrect VLAN ID range
  • Fixed IPsec start after reboot issue
  • Fixed IPsec cache issues
  • Fixed firewall rule execution when QoS is not enabled
  • Fixed ZeroTier crashing issues
  • Fixed Events Log Reporting sending email with attached file
  • Fixed unexpected Package Manager crash while installing unsupported packages
  • Fixed static mobile routes after modem restart
  • Fixed routing issue with mobile PPP connection type
  • Fixed double entries after firmware upgrade with keep settings on Output Scheduler
  • Fixed Hotspot freeze on launch with certain config bug
  • Fixed wireless device frequency and channel display in wireless widget
  • Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration

RUT2XX_R_00.01.13.3 | 2021.01.26

• Fixes:
  • Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
  • Fixed SSH reachable over SIM IP in early boot

RUT2XX_R_00.01.13.2 | 2021.01.12

• Fixes:
  • Added openvpn patch to fix CVE-2020-11810
  • Updated openssl to version 1.1.1i
  • Added dnsmasq patch for CVE-2019-14834
  • Added strongswan patch to fix CVE-2018-10811
  • Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
  • Updated uci to version 2019-09-01
  • Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
  • Fixed factory reset on button that wouldn't perform a complete settings wipe

RUT2XX_R_00.01.13.1 | 2020.11.19

• Fixes:
  • Randomized the global rate limiter to mitigate "SAD DNS" attack

RUT2XX_R_00.01.13 | 2020.10.23

• New features:
  • IPsec Xauth
  • IPsec Passthrough

• Improvements:
  • Added Input/Output default chain policy selections for firewall zones
  • Removed IPv6 related options from Setup Wizard
  • Improved WebUI page loading speed
  • Added a possibility to set MQTT credentials for Modbus Data Sender
  • Added options to keep connection open for Modbus TCP Slave
  • Added TLS certificate options to HTTP(S) data sending for Modbus data
  • Added the option to send SMS messages to multiple numbers on Modbus Alarms
  • Added IPsec aggressive host enable option
  • Expanded IPSec identifier validation
  • Added WiFi SSID field validation
  • Changed IP leasing sequence in mobile Passthrough mode
  • Added SHA512 support
  • Added MD5 & SHA256 checksum calculation for Configuration Backup files
  • Added uploaded package signature verification to Package Manager
  • Added new program that sends and reads GRE Tunnel 'keep alive' packets
  • Changed default WAN Failover values
  • Simplified key combination for opening a new CLI tab

• Fixes:
  • Fixed Modbus MQTT Gateway not responding when connection with broker restarts
  • Fixed Modbus MQTT Gateway not responding when topics gave special characters
  • Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
  • Fixed configuration field validations in the Modbus MQTT gateway page
  • Fixed MQTT topic validation in Modbus pages
  • Fixed configuration field validations in the ThingWorx page
  • Fixed Periodic Output Control table layout
  • Fixed security related issues to file uploading and HTTP headers
  • Fixed adding new L2TP and PPTP instances on non-English WebUI
  • Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
  • Fixed WiFi SSID string handling in fix_sta_ap.sh
  • Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
  • Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
  • Fixed table design in the System → Administration → Access Control → Safety page
  • Fixed not setting iptables rules for mobile interface
  • Fixed saving APN after firmware upgrade
  • Fixed default mobile MTU setting
  • Fixed access to LAN page when mobile Bridge mode is enabled
  • SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
  • Removed IPv6 Subprefix Hint field from the Network → LAN page
  • Fixed DNS push from OpenVPN server
  • Fixed L2TP over IPsec with Android 10
  • Removed crt_rms deprecated service
  • Fixed RMS collecting data usage
  • Fixed mobile status error for Load Balancing
  • Fixed WAN MAC address value in SMS Utilities command response
  • Fixed answer delay for Call Utilities commands
  • Fixed key combination not working
  • Removed Wireguard from the Network → Status page when this package is not installed
  • Changed SNMP RX, TX object types to uint64

RUT2XX_R_00.01.12.3 | 2020.06.15

• Improvements:
  • Improved RMS connection establishment

RUT2XX_R_00.01.12.2 | 2020.05.08

• Fixes:
  • Fixed Verizon operator APN configuration

RUT2XX_R_00.01.12.1 | 2020.04.09

• Fixes:
  • Fixed AT&T operator APN

RUT2XX_R_00.01.12 | 2020.03.24

• New features:
  • Added sms remote configuration option
  • Added "Enable HTTPS" option in "Access Control" page
  • Added network frequency band select support for EG25-G modem
  • Added additional service mode options to setup wizard
  • Added Japanese language support
  • Added TLS support to MQTT publisher
  • Added mqtt subscriber support
  • MQTT-Modbus gateway: add MQTT-Modbus gateway support
  • Added ability to install packages stored in backup file
  • Full Unicode SMS support
  • Added time sync from operator station
  • Added ntpclient failover to operator station sync
• Improvements:
  • Removed wep encryption from WiFi settings
  • Added profile scheduler and default configuration profile
• Fixes:
  • Fixed TR-069 wan type value
  • removed GRE tunnel option in Events reporting
  • Removed config update from server option
  • Fixed to display the same units of download and upload speeds in the Hotspot settings.
  • Fixed not showing Hotspot users upload/download statistics
  • Added ability to write hyphens to static lease hostname.
  • Fixed RAM usage display
  • Fixed password change URL after firstboot
  • Removed change password error message after firstboot
  • Fixed Web access Control via SMS Utilities
  • Fxed signal strength logging and reporting

RUT2XX_R_00.01.11.3 | 2019.12.04

• Fixes:
  • Fixed RMS not displaying data when using WiFi
  • Fixed RMS not displaying WAN IP with WAN failover

RUT2XX_R_00.01.11.2 | 2019.11.12

• Fixes:
  • TR-069 WAN type value fix
  • RMS batch number instead of product code bug fix
  • Added missing HMAC options and PKCS12 support to OpenVPN

RUT2XX_R_00.01.11.1 | 2019.10.21

• New features:
  • Auto APN
  • SMS Utilities Auto APN toggling
  • Operators control & support for JioAPN
  • Package Manager
  • RMS wireless monitoring
  • Port based VLAN configuration
  • I/O power socket pinout image
  • VRRP advertisement interval option

• Improvements:
  • UPnP updated to version 2.1
  • SIM switching optimizations
  • Faster SSH private key generation on first boot
  • Added network, serving and neighbor cell information to Troubleshoot files

• Fixes:
  • Wget Reboot minimal interval for action 'reboot' added
  • Ping Reboot packet size 0 fix
  • Modbus WebUI fixes
  • Modbus WiFi/Mobile on/off fix
  • SMS Utilities table validation fix
  • SMS Utilities UCI API fixes
  • SMS Utilities SMS response status fix
  • SMS-Utilities WiFi/Mobile on/off fix
  • Clarified WebUI options for SMS Forwarding
  • Hotspot Statistics tab shows incorrect information fix
  • Hotspot session name validation fix
  • Hotspot landing page file upload limits increased
  • Fixed MAC address clone configuration
  • Fixed sessions table dependency on authentication mode
  • Events log network type logging on modem service restart fix
  • Events Reporting typos that prevented rules being matched fixes
  • WAN Failover option disappearing after language change fix
  • Removed unnecessary fix_sta_ap.sh from syslog messages
  • Removed OpenVPN converting names to hex
  • Added file upload limits
  • DDNS name validation fix
  • Hostname and router name after backup upload fix
  • Mobile Data Limit firewall rule init fix
  • Added missing password validation
  • Fixed default VRRP config to follow RFC 2338
  • Changed packages names in Package Manager
  • Input/Output label & functionality fixes
  • FOTA memory calculation fix
  • Removed "Site Survey" page

RUT2XX_R_00.01.10 | 2019.07.12

• New features:
  • New flash validation added

• Improvements
  • Added reply after mobileon and mobileoff SMS Utilities commands

• Fixes:
  • Firmware upgrade with keep settings fix
  • PPTP fix when upgrading firmware with keep settings
  • Do not autocomplete non-system passwords fix
  • Added validation for 'Service mode' change
  • VRRP template fix
  • Added validation for user group number format
  • SMS Gateway: removed new line add after configuration save
  • Added validation to prevent shell command execution via 'name' field in Wake on LAN
  • NTP time zone options fix
  • MQTT bridge with SSL/TLS connection fix
  • 'Use DNS servers advertised by peer' does not save fix
  • 'FW update available' fix
  • WAN state and IP print fixes

RUT2XX_R_00.01.07.1 | 2019.06.10

• Fixes:
  • Increased RMS HTTP Proxy resource limit

RUT2XX_R_00.01.07 | 2019.05.31

• New features:
  • SNMP: Individual port status added
  • openssl: update to version 1.0.2r
  • dropbear: update to version 2019.78
  • busybox: update to version 1.30.1
  • uci: update to version 2018-08-11
  • ubus: update to version 2018-10-06
  • ubox: update to version 2019-04-07
  • libubox: update to version 2019-02-27
  • MQTT: added MQTT support
  • WebUI: add additional band support for EC25
  • UPnP: UPnP added
  • WebUI: add events reporting and reporting configuration support
  • Flash: Add XT25F128B flash support
  • Strongswan: Custom option added
  • WebUI: upload backup from lower firmware version support

• Fixes:
  • Wireless: Station availability when two or more Access Points are created fix
  • Mobile Graphs: Color and line adjustments
  • WebUI: Overview->Network->Topology: WAN Failover redirection fix
  • Strongswan: Shared-keys fix
  • WebUI: fix input validation issues
  • Mobile traffic: graph fixes
  • WebUI: fix LEDs Indication setting
  • QMI2: set 1st context to IPv4
  • Hotspot: Restrict internet access fix
  • Hotspot: 'Invalid' prompt after deleting session fix
  • IPSec: No shared key validation added
  • Email-to-SMS: longer SMS fix
  • IPSec: Allow WebUI access with HTTPS fix
  • RMS: fixed disable on sysupgrade with keep settings
  • WebUI: LEDs Indication hint text fix
  • IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
  • SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
  • Wireless: Regulatory domain and channel change fix
  • SMS-Management: Error message after successful SMS send fix
  • Services: SNMP Trap redirection fix
  • Periodic Control: Rule addition in Chromium fix
  • Setup Wizard: Dialing number disappearing fix
  • WAN: After interface edit, redirect back to main WAN window fix
  • SNMP: Teltonika MIB file fix
  • rms_mqtt: HTTPs proxy fix
  • rms_json: Fixed WAN State and WAN IP
  • Wireless: STA connection loss fix
  • QoS: Speed limitation fix
  • Stunnel: Removed unnecessay WebUI options, added validation.
  • Port Scan Prevention: Disable fix
  • Port Scan Prevention: Warning message for remote access added
  • ledman: fixed led issue when there is no connection
  • ledman: fixed led issue when rebooting router with reset button
  • Wireless: Channel frequency dispaly fix
  • Administration: RMS 'infobox' fix
  • Setup Wizard: RMS 'infobox' fix
  • Setup Wizard: Validation and redirection fixes
  • VRRP: updated to 1.15 version
  • LAN: Static leases fix
  • Backup: Redirection to 127.0.0.1 after backup load fix
  • Network: 'Use WAN as LAN' availability fix
  • WebUI: WAN as LAN when using main WAN WIFI fix
  • Network: Delete static protocol options after change to DHCP fix
  • L2TP and PPTP: updated services

RUT2XX_R_00.01.06.1 | 2019.03.18

• New features:
  • Added 'More' SMS Utilities rule

• Fixes:
  • RMS reconnect issue fix
  • Hotspot authentication mode change fix
  • Overview widget fixes
  • Connection uptime widget fix
  • SMS Management inbox read fix
  • Wireless scan fix
  • SSTP service update
  • SMS-Utilities: various functionality fixes
  • Restore-Point: Removed the ability to load restore points of a different router
  • VLAN: LAN Network configuration backup fix
  • Maximum length SMS message send fix
  • Long SMS messages stretch out WebUI fix
  • Ping Reboot: reboots after service is disabled fix
  • Removed warning message when scanning for WiFi STA
  • Setup Wizard WiFi channel select custom option remove fix
  • Call Utilities: double zero in front of the number fix
  • Setup Wizard: you cannot procceed with setup if you disable DHCP fix
  • Restore to default percentage counting fix
  • WoL: Use WAN as LAN fix
  • Network Operators: Typo fix
  • Events log: Typo fixes
  • Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
  • Hotspot: configuration saves without advertisement address fix
  • WiFi channel frequency display fix
  • Mobile Traffic: daily statistics show wrong time fix
  • STunnel text display fix
  • IPSec text display fix
  • OpenVPN remove TLS clients in TAP mode fix
  • Hotspot: Tab placement fix
  • Overview: Text changes
  • SMS-Utilities: 'uci show' fix
  • WebUI: added connection band info to mobile status page
  • Mobile: fix for LTE band default value for different regions
  • RMS: fixed logread messages
  • I/O: fixed output state labels

RUT2XX_R_00.01.05.1 | 2019.02.22

• New features:
  • Added Wake on LAN functionality
  • Added Wake on LAN SMS Utilities rule
  • Added STunnel feature to VPN services

• Improvements:
  • Added every WAN interface selection to Qos
  • Add modem restart option to Periodic Reboot
  • Updated curl to version 7.64.0
  • Updated OpenSSL to version 1.0.2q

• Fixes:
  • L2TP network restart after connection loss fix
  • OpenVPN service restart when TLS-Password is changed fix
  • Mobile IP and gateway fix
  • Overview OpenVPN widget display fix
  • IPSec psk_key save after older firmware upgrade fix
  • Configuration backup and firmware upgrade stuck on the 'downloading' page fix
  • SNMP memory leak fix
  • Mobile data limit keep limit after firmware upgrade with keep settings fix
  • Remote access information fix
  • L2TP IP range change fix
  • Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
  • Hotspot firewall rules fix
  • Data-only SIM fix
  • Wireless Station and Access Point fixes
  • Deleted unnecessary IPsec keep alive option
  • Fixed GRE Tunnel connection
  • Removed NOTRACK target from firewall rules
  • WAN IP not showing on Login page fix
  • DDNS process kill fix
  • WAN selected as LAN fix
  • IPSec restart when backup mobile fails fix
  • RMS memory usage fix
  • CLI Connect button fix
  • Mobile traffic counter resetting fix
  • Multiple OpenVPN related fixes
  • Ping Reboot fix

RUT2XX_R_00.01.04.2 | 2018.12.20

• Fixes:
  • SSH security fix
  • Mobile page fix

RUT2XX_R_00.01.04.1 | 2018.11.15

• New features:
  • Added NTP server, force servers option for ntpclient
  • Added selectable network band support
  • Added SSTP
  • Replace bird routing package with quagga package
  • Added WiFi MAC Filter address range support
  • Changed RMS communication protocol to use MQTT instead of OpenVPN
  • Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm

• Improvements
  • Updated mobile operator database
  • Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration
  • Sensitive information (usernames and passwords) removed from router's Troubleshoot file
  • Added warnings to Call Utilities when on 4G-only mode

• Fixes:
  • Fixed multiwan restart sequence issues causing VPN instabilities
  • Static Routes fix
  • WiFi updates and security fixes
  • Minor improvements and bug fixes for operator selection
  • SNMP MIB values and file format fix
  • SNMP Hotspot and serial values fix
  • Redirect to login page after factory reset fix
  • IPsec init script fix
  • Overview WiFi widget fix
  • Modbus WiFi enable/disable fix
  • Modbus APN write and memory leak fixes
  • JavaScript code multiplication fix
  • DHCP server lease time validation update fix
  • Hang up on watchdog reset fix
  • Overview mobile WAN IP display fix
  • curl: update to 7.62.0
  • OpenSSL: update to 1.0.2p
  • cacert: update to 2018-10-17
  • arptables segmentation fault fix
  • quectel-CM: updated to latest version
  • GRE Tunnel delete after button press fix
  • Update Teltonika contact address in Licenses page
  • Disabled passthrough and bridge selection when multiwan is enabled
  • Fixed lua dispatcher error after reboot
  • Fixed multiwan metrics and priorities
  • SMS Utilities SMS status WAN IP with multiwan fix

RUT2XX_R_00.01.03.5 | 2018.10.23

• Fixes:
  • VPN shutdown at delete fix
  • PPTP default gateway set and delete fix
  • OpenVPN status fix
  • OpenVPN configuration section name compatibility fix
  • IPsec redirect after save fix
  • Overview VRRP widget status fix
  • Hotspot start after reboot fix
  • Added default LAN IPv6 address
  • Overview WAN wiki link fix
  • Hotspot overview fix
  • Mobile data counter reset fix

RUT2XX_R_00.01.03.2 | 2018.09.05

• New features:
  • Added operators control with white/black list feature
  • Added Administration -> Root CA page

• Improvements:
  • Added many security updates
  • Added firmware update information
  • Added CellID information to Troubleshoot file

• Fixes:
  • GPL: compilation fixes
  • Configuration restore fix
  • Disabled Hotspot users' ability to reach LAN devices and WebUI
  • Port Forwarding IP validation fix
  • System -> Administration -> Overview page loading fix when VPN configuration exists
  • Some minor DHCP display fixes
  • Call Utilities reboot action partial message fix
  • DDNS IP source change and added time selection
  • OpenVPN service fixes
  • Some minor QoS fixes
  • Some minor OpenVPN fixes
  • Configuration Wizard: LAN page redirect fix
  • Overview WAN IP fix
  • Added Redirect to HTTPS information
  • Troubleshoot TCPdump fix
  • Changed 'Backup WAN' to 'WAN Failover'
  • WebUI: language translation in some pages fix
  • Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
  • Overview VPN widget IP fix

RUT2XX_R_00.01.02.6 | 2018.08.22

• Fixes:
  • Fixed GPL Readme
  • Fixed JavaScript password validation

RUT2XX_R_00.01.02.3 | 2018.06.08

• Fixes:
  • Fixed RMS status in overview page
  • Fixed LTE signal strength graph

RUT2XX_R_00.01.01.4 | 2018.05.16

• New features:
  • Added DHCP Force option
  • Added RMS connection page to Setup Wizard
  • Added forced password change

• Improvements:
  • Updated Overview widget icons, added Teltonika Wiki links
  • Added private key decryption function to OpenVPN client configuration
  • Added additional DPD options

• Fixes:
  • Fixed Wget reboot URL datatype
  • WebUI: SSH access status fix
  • Added special symbols exception to SMS-Forwarding
  • Added missing Events Reporting config for SMS-Utilities
  • PPP enable/disable bug fix
  • Multiple Call Utilities fixes
  • SMS event queries fix
  • Removed unnecessary sim_switch message text
  • Some SSH security fixes
  • Updated Modbus sources and coding table
  • Multiple OpenVPN bug fixes
  • Graphs/Signal strength fix when using HSDPA+HSUPA network type
  • Fixed VLAN DHCP leasing
  • Administration password change fix
  • STA mode logic changed
  • Hotspot bandwith limit fix
  • Moved IP alias gateway to advanced features
  • Administration -> Overview fix
  • Factory reset fix due to mobile connection problems

RUT2XX_R_00.01.00 | 2018.03.19

• Improvements:
  • Added hostname validation for Wget Reboot
  • New versioning logic

• Fixes:
  • Output ON/OFF fix
  • Firmware Upgrade fix
  • SSH authentication logging fix

RUT2XX_R_00.00.553 | 2018.03.09

• New features:
  • Added Redirect LAN to GRE function

• Fixes:
  • Mobile Data Limit fixes
  • User's password removed from users table
  • Firmware upgrade message fixed

RUT2XX_R_00.00.539 | 2018.03.01

• Fixes:
  • Minor Openvpn functionality fixes

RUT2XX_R_00.00.486 | 2018.02.27

• New features:
  • Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )

RUT2XX_R_00.00.482 | 2018.02.22

• Fixes:
  • Updated SMS send satus
  • Added Modbus enable check-box
  • Added firewall rule so the router would be reachable from WAN when access control is enabled

RUT2XX_R_00.00.474 | 2018.02.20

• Improvements:
  • Added download MIBS button to SNMP page

• Fixes:
  • Fixed style for VPN service pages, Modbus page

RUT2XX_R_00.00.388 | 2018.02.19

• New features:
  • Added Relayd function that can make the router act like a wireless range extender

RUT2XX_R_00.00.382 | 2018.02.06

• Fixes:
  • Fixed Wi-Fi logging to FTP function
  • Fixed site blocking file parsing
  • System Information texts fix

RUT2XX_R_00.00.377 | 2018.01.31

• New features:
  • IPsec: added Transport mode, Firewall options, local IP management options

• Improvements:
  • Moved Disable NAT flags from VPN to Firewall page

• Fixes:
  • Fixed Firewall config for hotspot interface assignment
  • DMZ rule position fix

RUT2XX_R_00.00.372 | 2018.01.16

• Improvements:
  • Added binero.se to DDNS service providers list
  • Added some additional SMS Utilities hints
  • Added support for changing Wireless SSID name from branding script
  • Improved Email to SMS function

• Fixes:
  • WAN port status display fix
  • Fixed SMS Utilities Write to config bug when sending mobileoff message
  • Whitelist blocking fix in Site Blocking

RUT2XX_R_00.00.355 | 2018.01.05

• New features:
  • Added WPA-Enterprise encryption type support for Wi-Fi Access Points
  • Added Email To SMS, SMS Forwarding functions
  • Added Wget Reboot function

• Improvements:
  • Updated fw upgrade validation for future firmwares

• Fixes:
  • Fixed bug of not being able to use hostnames as a destination for Ping Reboot
  • Input/Output Scheduler backup bug fix
  • System->Administration page style fixes
  • Removed wifid due to security issues
  • Configuration Backup bug fixes

RUT2XX_R_00.00.339 | 2018.01.02

• New features:
  • Added IPsec option for WebUI access through tunnel
  • Added Reset button custom hold time configuration

• Fixes:
  • Minor Mobile Data Limit bug fix
  • Renamed mibs file to TLT-MIB.txt
  • Temperature display fix
  • Added Async Control Character Maps
  • Fixed minor grammatical errors in the WebUI
  • OpenVPN hints fix

RUT2XX_R_00.00.312 | 2017.12.08

• Fixes:
  • Some minor PPTP Server and Client functionality fixes
  • Added fix to PPP Connection Type due to disconnecting mobile connection
  • Real traffic fix

RUT2XX_R_00.00.307 | 2017.12.05

• New features:
  • Added Hotspot configuration profiles

• Improvements:
  • Added custom redirect address
  • Added troubleshoot file download protection

• Fixes:
  • Some minor Hotspot functionality fixes
  • Mobile data logging fix
  • Some minor Dynamic DNS functionality fixes

RUT2XX_R_00.00.296 | 2017.11.23

• Improvements:
  • SMS Utilities fw_upgrade rule now works with Keep Settings

• Fixes:
  • Minor Reregister function fix
  • Use IPv4 only fix
  • Minor mobile interface fix
  • Some minor Site Blocking fixes
  • Connect to hidden WiFi AP fix
  • Multiwan metric change fix for RUT230

RUT2XX_R_00.00.284 | 2017.11.03

• Improvements:
  • Improved Mobile Data Limit functionality
  • Improved Load Balancing functionality