Network share using SAMBA: Difference between revisions

Latest revision as of 14:52, 5 May 2022

Introduction

This article provides information and step by step guide to configure samba share on Teltonika routers.

The information on this page is updated in accordance with RUTX_R_00.07.01.4 firmware version.

Samba share is a software package used to provide secure, stable, and fast file and print service for clients using SMB/CIFS protocol. It is compatible to use with Windows and Linux systems. SMB is a network file sharing protocol and CIFS is a network file system protocol. CIFS is a successor of SMB, and both runs on tcp or udp using port 137 and 138 for UDP, 139 and 445 for TCP.

Prerequisites

You will need:

RUTX router running FW version RUTX_R_00.07.01.4 or newer.
A computer running Windows OS.
A USB flash drive.

Instructions

Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wifi.
Login to the router's WebUI, go the Services → USB Tools → General page and verify if your USB is mounted:
Navigate to Network Shares and Enable it.
Configure Hostname, Description, Workgroup.
Enable Share home-directories if you want to share home directories. Click Save & Apply.
Configure Users in Users section: click Save & Apply:
Go back to General tab: under Shared Directories → click ADD button, and create a directory that you want to share and select the users that you want to share directory with. Click Save & Apply.
On your PC: Open Network folder and type: “ \\192.168.1.1\netshare” in address bar.
You need to provide user name and password that were created under Network Share → Users.

@@ Line 4: / Line 4: @@
 The information on this page is updated in accordance with '''RUTX_R_00.07.01.4''' firmware version.
-Samba share is a software package used to provide secure, stable, and fast file and print service for clients using SMB/CIFS protocol. It is compatible to use with windows and Linux systems. SMB is a network file sharing protocol and CIFS is a network file system protocol. CIFS is a successor of SMB, and both runs on tcp or udp using port 137 and 138 for udp, 039 and 445 for tcp.
+Samba share is a software package used to provide secure, stable, and fast file and print service for clients using SMB/CIFS protocol. It is compatible to use with Windows and Linux systems. SMB is a network file sharing protocol and CIFS is a network file system protocol. CIFS is a successor of SMB, and both runs on tcp or udp using port 137 and 138 for UDP, 139 and 445 for TCP.
 == Prerequisites ==
@@ Line 16: / Line 16: @@
 # Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wifi.
-# Login to the router's webUI, go the '''Services → USB Tools → General''' page and verify if your USB is mounted:[[File:Networking rutx configuration examples network share Verify usb is mounted.png|border|class=tlt-border|701x701px]]
+# Login to the router's WebUI, go the '''Services → USB Tools → General''' page and verify if your USB is mounted:[[File:Networking rutx configuration examples network share Verify usb is mounted.png|border|class=tlt-border|701x701px]]
 #Navigate to Network Shares and Enable it.
 #Configure Hostname, Description, Workgroup.
-#Enable Share home-directories if you want to share home directories. Click save & apply.[[File:Networking rutx configuration examples Network share general setting.jpg|border|class=tlt-border|701x701px]]
+#Enable Share home-directories if you want to share home directories. Click Save & Apply.[[File:Networking rutx configuration examples Network share general setting.jpg|border|class=tlt-border|701x701px]]
-#Configure Users in Users section: click save & apply:[[File:Networking rutx configuration examples network share users.jpg|border|class=tlt-border|911x911px]]
+#Configure Users in Users section: click Save & Apply:[[File:Networking rutx configuration examples network share users.jpg|border|class=tlt-border|911x911px]]
-# Go back to General tab: under Shared Directories > click ADD button, and create a directory that you want to share and select the users that you want to share directory with. Click save & apply.        [[File:Networking rutx configuration examples network share add shared directories.jpg|border|class=tlt-border|1000x1000px]]
+# Go back to General tab: under Shared Directories → click ADD button, and create a directory that you want to share and select the users that you want to share directory with. Click Save & Apply.        [[File:Networking rutx configuration examples network share add shared directories.jpg|border|class=tlt-border|1000x1000px]]
 #On your PC: Open Network folder and type: “ \\192.168.1.1\netshare” in address bar.  [[File:Networking rutx configuration examples network share on your pc window.png|border|class=tlt-border|554x554px]]
-#You need to provide user name and password that were created under Network Share > Users.[[File:Networking rutx configuration examples network share credentials.jpg|border|class=tlt-border]]
+#You need to provide user name and password that were created under Network Share → Users.[[File:Networking rutx configuration examples network share credentials.jpg|border|class=tlt-border]]