Template:Networking rutos manual hotspot 2.0: Difference between revisions

Latest revision as of 15:28, 3 September 2024

Hotspot 2.0

The Hotspot 2.0 displays available WiFi interfaces. In order to begin configuring an interface click the 'Edit' button next to it:

[[File:Networking_rutos_manual_hotspot_2.0_interfaces_edit_button_wifi_v3_{{{wifi}}}.png|border|class=tlt-border]]

After this you should be redirected to the configuration page for that interface.

Hotspot 2.0 Configuration

The main configuration parameters of a Hotspot 2.0 interface will be discussed in this section.

A Hotspot 2.0 interface requires WPA2-EAP encryption. You can configure it in the Network → Wireless page (click 'Edit' next to an interface and find the [[{{{name}}} Wireless#Wireless_Security|Wireless Security]] section).

General Setup

Field	Value	Description
Enable	off \| on; default: off	Turns Hotspot 2.0 for this interface on or off.
Internet access	off \| on; default: off	Is used to inform the client device whether internet access is available.
Access Network Type	Private network \| Private network with guest access \| Chargeable public network \| Free public network \| Personal device network \| Emergency services only network \| Test or experimental; default: Private network	The access network type present in beacon and probe response frames. Mobile devices can use this information when selecting a hotspot.
HESSID	mac; default: none	Homogeneous ESS identifier (optional). This shall be identical to one of the BSSIDs in the homogeneous ESS.
Roaming consortium OI	3 or 5 octet hexstring; default: none	Only first three entries are available through Beacon and Probe Response frames.
Network authentication type	Not configured \| Acceptance of terms and conditions \| On-line enrollment supported \| http/https redirection \| DNS redirection; default: Not configured	Type of authentication used on this network.
Redirect URL	url; default: none	Http/https redirection link.
IP Address type availability	Address type not available \| Public IPv1 address available \| Port restricted IPv4 address available \| Single NATed IPv4 address available \| Double NATed IPv4 address available \| Port restricted IPv4 address and single NATed IPv4 address available \| Port restricted IPv4 address and double NATed IPv4 address available \| Availability of the address type is not known; default: Availability of the address type is not known	Provides information about the IP address version and type that would be available to a mobile device after it authenticates to the network.
Domain name	domain name; default: none	The Domain Name ANQP-element provides a list of one or more domain names of the entity operating the hotspot network.
Venue group	various; default: Unspecified	Describes the venue in which the hotspot is located.
Venue type	various; default: Unspecified	Describes the venue in which the hotspot is located.

OSU Provider

Field	Value	Description
OSU ssid	string; default: none	Informs client devices about the SSID used for OSU connections.
OSU server URL	url; default: none	Is used to inform the client device whether internet access is available.
Name language code	string; default: none	Two or three character language code (ISO-639).
OSU friendly name	string; default: none	User-friendly name of an OSU service provider.
OSU NAI	string; default: none	OSU network access identifier.
OSU method list	OMA-DM \| SOAP-XML; default: none	Configures the supported OSU method(s) of the OSU provider.
Description language code	string; default: none	Two or three character language code (ISO-639).
Description	string; default: none	OSU service description.

WAN Metrics

Field	Value	Description
Link Status	Link up \| Link Down \| Link in test state; default: Link up	Provides information about the WAN link that connects the hotspot to the Internet.
Downlink Speed	integer [1..4294967295]; default: none	Maximum downlink speed in Kbps.
Uplink Speed	integer [1..4294967295]; default: none	Maximum uplink speed in Kbps.

Venue Name Information

The Venue Name Information is used to configure one or more Venue Name values for Venue Name ANQP information. To add a new Venue configuration, click the 'Add' button.

You should see a new entry appear in the Venue Name Information list.

Field	Value	Description
Language Code	string; default: none	Two or three character language code (ISO-639).
Venue Name	string; default: none	Name of this venue.
Venue URL Information	url; default: none	Venue URL to provide additional information corresponding to Venue Name information (the URL should contain protocol).

3GPP Cellular Network Information

The 3GPP Cellular Network Information section is used to uniquely identify mobile network operators. To add a new mobile operator instance, click the 'Add' button.

You should see a new entry appear in the 3GPP Cellular Network Information list.

Field	Value	Description
Mobile Country Code	integer; default: none	Mobile country code (3 decimal digits).
Mobile Network Code	integer; default: none	Mobile network code (2 or 3 decimal digits).

Network Access Identifier (NAI) Realm Information

The Network Access Identifier (NAI) Realm Information parameters provide information for stations using interworking network selection to allow automatic connection to a network based on credentials. To add a new NAI Realm Information configuration, click the 'Add' button.

You should see a new entry appear in the Network Access Identifier (NAI) Realm Information list.

Field	Value	Description
NAI Realm	url; default: Link up	The NAI Realm provides a list of NAI realms corresponding to the Home SPs that can authenticate a client device.
EAP Method	EAP-TLS \| EAP-TTLS \| PEAP \| EAP-FAST; default: Undefined	Identifies the EAP method supported by that NAI realm for authentication.
Authentication Parameter	Undefined \| Non EAP PAP \| Non EAP CHAP \| Non EAP MSCHAP \| Non EAP MSCHAPV2 \| Credential certificate \| Credential username/password; default: Undefined	EAP method authentication parameter.

Operator Friendly Name

The client device may obtain the Operator Friendly Name via GAS/ANQP queries to assist the user during manual hotspot selection. To add a new Operator Friendly Name configuration, click the 'Add' button.

You should see a new entry appear in the Operator Friendly Name list.

Field	Value	Description
Language Code	string; default: Link up	Two or three character language code (ISO-639).
Operator's Name	string; default: none	Provides a friendly name for the Hotspot Operator.

Connection Capability

The Connection Capability section provides information on the status of commonly used communication protocols and ports. To add a new protocol/port configuration, click the 'Add' button.

You should see a new entry appear in the Connection Capability list.

Field	Value	Description
Protocol	ICMP \| TCP \| UDP; default: ICMP	Network protocol type.
Port Number	integer [0..65535]; default: none	TCP/UDP port number.
Status	Closed \| Open \| Unknown; default: Closed	Status to be displayed for the selected protocol/port combination.

@@ Line 1: / Line 1: @@
-{{Template: Networking_rutos_manual_fw_disclosure
-| fw_version ={{Template: Networking_rutos_manual_latest_fw
- | series = {{{series}}}
- | name   = {{{name}}}
- }}
-}}
-==Summary==
-<b>Hotspot 2.0</b> is a wireless network standard designed to make it easier and more secure to connect to public WiFi hotspots. This chapter is an overview of the Hotspot 2.0 section for {{{name}}} devices.
-{{#switch: {{{series}}}
-  | #default =
-  | RUT36X|RUT9|TCR1|RUT2|RUT2M|RUT9M =
-<u><b>
-Note:</b> Hotspot 2.0 is additional software that is included with the Hotspot package and can be installed from the <b>Services → [[{{{name}}} Package Manager|Package Manager]]</b> page.</u>
-}}
 ==Hotspot 2.0==
 The <b>Hotspot 2.0</b> displays available WiFi interfaces. In order to begin configuring an interface click the 'Edit' button next to it:
-[[File:Networking_rutos_manual_hotspot_2.0_interfaces_edit_button_wifi_{{{wifi}}}.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_interfaces_edit_button_wifi_v3_{{{wifi}}}.png|border|class=tlt-border]]
 After this you should be redirected to the configuration page for that interface.
@@ Line 30: / Line 12: @@
 A <u>Hotspot 2.0 interface requires WPA2-EAP encryption</u>. You can configure it in the <i>Network → Wireless</i> page (click 'Edit' next to an interface and find the [[{{{name}}} Wireless#Wireless_Security|Wireless Security]] section).
-[[File:Networking_rutos_manual_hotspot_2.0_wpa2-eap_setup.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_wpa2-eap_setup_v1.png|border|class=tlt-border]]
 ====General Setup====
 ----
-[[File:Networking_rutos_manual_hotspot_2.0_general_setup.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_general_setup_v1.png|border|class=tlt-border]]
 <table class="nd-mantable">
@@ Line 54: / Line 36: @@
      <tr>
        	<td>Access Network Type</td>
-        	<td>Private network | Private network with guest access | Chargeable public network | Free public network | Personal device network | Emergency services only network | Test or experimental; default: <b></b></td>
+        	<td>Private network | Private network with guest access | Chargeable public network | Free public network | Personal device network | Emergency services only network | Test or experimental; default: <b>Private network</b></td>
         	<td>The access network type present in beacon and probe response frames. Mobile devices can use this information when selecting a hotspot.</td>
      </tr>
@@ Line 69: / Line 51: @@
      <tr>
        	<td>Network authentication type</td>
-        	<td>Not configured | Acceptance of terms and conditions | On-line enrollment supported | http/https redirection | DNS redirection; default: <b>Not configured</b></td>
+        	<td>Not configured | Acceptance of terms and conditions | On-line enrollment supported | <span style="background-color: yellow;">http/https redirection</span> | DNS redirection; default: <b>Not configured</b></td>
         	<td>Type of authentication used on this network.</td>
+    </tr>
+    <tr>
+      	<td><span style="background-color: yellow;">Redirect URL</span></td>
+       	<td>url; default: <b>none</b></td>
+       	<td>Http/https redirection link.</td>
      </tr>
      <tr>
@@ Line 89: / Line 76: @@
      <tr>
        	<td>Venue type</td>
-        	<td>various; default: <b></b></td>
+        	<td>various; default: <b>Unspecified</b></td>
         	<td>Describes the venue in which the hotspot is located.</td>
      </tr>
@@ Line 96: / Line 83: @@
 ====OSU Provider====
 ----
-[[File:Networking_rutos_manual_hotspot_2.0_osu_provider.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_osu_provider_v3.png|border|class=tlt-border]]
 <table class="nd-mantable">
@@ Line 148: / Line 135: @@
 ====WAN Metrics====
 ----
-[[File:Networking_rutos_manual_hotspot_2.0_wan_metrics.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_wan_metrics_v2.png|border|class=tlt-border]]
 <table class="nd-mantable">
@@ Line 158: / Line 145: @@
      <tr>
        	<td>Link Status</td>
-        	<td>Link up | Link Down; default: <b>Link up</b></td>
+        	<td>Link up | Link Down | Link in test state; default: <b>Link up</b></td>
         	<td>Provides information about the WAN link that connects the hotspot to the Internet.</td>
      </tr>
@@ Line 177: / Line 164: @@
 The <b>Venue Name Information</b> is used to configure one or more Venue Name values for Venue Name ANQP information. To add a new Venue configuration, click the 'Add' button.
-[[File:Networking_rutos_manual_hotspot_2.0_venue_name_information_add_button.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_venue_name_information_add_button_v1.png|border|class=tlt-border]]
 You should see a new entry appear in the Venue Name Information list.
-[[File:Networking_rutos_manual_hotspot_2.0_venue_name_information.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_venue_name_information_v1.png|border|class=tlt-border]]
 <table class="nd-mantable">
@@ Line 210: / Line 197: @@
 The <b>3GPP Cellular Network Information</b> section is used to uniquely identify mobile network operators. To add a new mobile operator instance, click the 'Add' button.
-[[File:Networking_rutos_manual_hotspot_2.0_3gpp_cellular_network_information_add_button.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_3gpp_cellular_network_information_add_button_v1.png|border|class=tlt-border]]
 You should see a new entry appear in the 3GPP Cellular Network Information list.
-[[File:Networking_rutos_manual_hotspot_2.0_3gpp_cellular_network_information.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_3gpp_cellular_network_information_v1.png|border|class=tlt-border]]
 <table class="nd-mantable">
@@ Line 224: / Line 211: @@
      <tr>
        	<td>Mobile Country Code</td>
-        	<td>integer; default: <b></b></td>
+        	<td>integer; default: <b>none</b></td>
         	<td>Mobile country code (3 decimal digits).</td>
      </tr>
@@ Line 238: / Line 225: @@
 The <b>Network Access Identifier (NAI) Realm Information</b> parameters provide information for stations using interworking network selection to allow automatic connection to a network based on credentials. To add a new NAI Realm Information configuration, click the 'Add' button.
-[[File:Networking_rutos_manual_hotspot_2.0_network_access_identifier_nai_realm_information_add_button.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_network_access_identifier_nai_realm_information_add_button_v1.png|border|class=tlt-border]]
 You should see a new entry appear in the Network Access Identifier (NAI) Realm Information list.
-[[File:Networking_rutos_manual_hotspot_2.0_network_access_identifier_nai_realm_information.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_network_access_identifier_nai_realm_information_v1.png|border|class=tlt-border]]
 <table class="nd-mantable">
@@ Line 271: / Line 258: @@
 The client device may obtain the <b>Operator Friendly Name</b> via GAS/ANQP queries to assist the user during manual hotspot selection. To add a new Operator Friendly Name configuration, click the 'Add' button.
-[[File:Networking_rutos_manual_hotspot_2.0_operator_friendly_name_add_button.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_operator_friendly_name_add_button_v1.png|border|class=tlt-border]]
 You should see a new entry appear in the Operator Friendly Name list.
-[[File:Networking_rutos_manual_hotspot_2.0_operator_friendly_name.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_operator_friendly_name_v1.png|border|class=tlt-border]]
 <table class="nd-mantable">
@@ Line 299: / Line 286: @@
 The <b>Connection Capability</b> section provides information on the status of commonly used communication protocols and ports. To add a new protocol/port configuration, click the 'Add' button.
-[[File:Networking_rutos_manual_hotspot_2.0_connection_capability_add_button.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_connection_capability_add_button_v1.png|border|class=tlt-border]]
 You should see a new entry appear in the Connection Capability list.
-[[File:Networking_rutos_manual_hotspot_2.0_connection_capability.png|border|class=tlt-border]]
+[[File:Networking_rutos_manual_hotspot_2.0_connection_capability_v1.png|border|class=tlt-border]]
 <table class="nd-mantable">
@@ Line 327: / Line 314: @@
      </tr>
 </table>
-[[Category:{{{name}}} Services section]]