Changes

==MQTT Gateway==

==MQTT Gateway==

===Using Teltonika device as an MQTT broker===

===Using Teltonika device as an MQTT broker===

Router setup when using the router as a broker consists of two parts. First, we are going to set up a local broker. In order to do so, navigate to '''Services -> MQTT -> Broker''' and enable the broker.

Router setup when using the router as a broker consists of two parts. First, we are going to set up a local broker. In order to do so, navigate to '''Services -> MQTT -> Broker''' and enable the broker.

For this example, we are going to need '''MQTT-in''' and '''MQTT-out''' nodes. We are not going to need a broker node for now, since we are using our router as an MQTT broker. In order to send request and get response messages, we are also going to need '''inject''' and '''debug''' nodes. Drag required nodes onto the screen and click on them to configure accordingly:

For this example, we are going to need '''MQTT-in''' and '''MQTT-out''' nodes. We are not going to need a broker node for now, since we are using our router as an MQTT broker. In order to send request and get response messages, we are also going to need '''inject''' and '''debug''' nodes. Drag required nodes onto the screen and click on them to configure accordingly:

*'''MQTT-out node''' - click on this node and then click on the pencil icon to configure Node-RED for Teltonika broker usage.

*'''MQTT-out node''' - click on this node and then click on the '''pencil''' icon to configure Node-RED for Teltonika broker usage.

[[File:Click on the pencil nodered broker local.png|border|500px|class=tlt-border]]

[[File:Click on the pencil nodered broker local.png|border|500px|class=tlt-border]]