0
edits
Changes
Template:Networking rutx configuration example openvpn bridge use case (view source)
Revision as of 18:40, 5 May 2020
, 18:40, 5 May 2020→Configuration overview and prerequisites
'''Prerequisites''':
'''Prerequisites''':
* One RUTxxx router
* One RUTX router
* A Public Static or Public Dynamic IP addresses
* A Public Static or Public Dynamic IP addresses
* An end device to configure the router (PC, Laptop, Tablet, Smartphone)
* An end device to configure the router (PC, Laptop, Tablet, Smartphone)
The topology above depicts the OpenVPN scheme. The router with the Public IP address ('''{{{name}}}''') acts as the '''OpenVPN server''' and other '''{{{name}}}''' acts as '''client'''. OpenVPN connects the networks of '''HQ Office''' and '''Remote Office'''.
The topology above depicts the OpenVPN scheme. The router with the Public IP address ('''RUTX11''') acts as the '''OpenVPN server''' and other '''RUTX11''' acts as '''client'''. OpenVPN connects the networks of '''HQ Office''' and '''Remote Office'''.
When the scheme is realized, remote office workers will be able to reach HQ’s internal network with all internal systems, allowing working from remote office to be possible. All remote office's WAN and LAN traffic is going to travel through VPN tunnel.
When the scheme is realized, remote office workers will be able to reach HQ’s internal network with all internal systems, allowing working from remote office to be possible. All remote office's WAN and LAN traffic is going to travel through VPN tunnel.