Line 85: |
Line 85: |
| ====Configuration Settings==== | | ====Configuration Settings==== |
| ---- | | ---- |
− | A new window will prompt on your WebUI, fill out the fields according to the information bellow: | + | A new window will prompt on your WebUI; fill out the fields according to the information below: |
| * Switch the '''Enable''' toggle to the on position. | | * Switch the '''Enable''' toggle to the on position. |
− | * Switch the '''Use HTTP Secure''' toggle to the on position. '''(Optional)''' | + | * Switch the '''Use HTTP Secure''' toggle to the on position. '''(Optional)'''. |
− | * At '''Lookup Hostname''' and '''Domain'''introduce the no-ip.com hostname previously created. '''(They all must match)''' | + | * At '''Lookup Hostname''' and '''Domain'''introduce the no-ip.com hostname previously created. '''(They all must match)'''. |
− | * Choose no-ip.com as '''DDNS Service Provider''' | + | * Choose no-ip.com as '''DDNS Service Provider'''. |
− | * Type in your credentials used to create your no-ip.com account. | + | * Type in the credentials used to create your no-ip.com account. |
− | * Select '''Script''' as the '''Ip address Source''' | + | * Select '''Script''' as the '''Ip address Source'''. |
| * At '''Event Network''', select the interface where the ipv6 address is enabled. | | * At '''Event Network''', select the interface where the ipv6 address is enabled. |
| * Introduce your Script PATH. | | * Introduce your Script PATH. |
− | * Choose the update interval of your preference and to finish, click on '''SAVE & APPLY''' to save and load your configuration. | + | * Choose the update interval of your preference, and click on '''SAVE & APPLY''' to save and load your configuration. |
| | | |
| <br> | | <br> |