Load Balancing Rules/Policies examples: Difference between revisions

Revision as of 12:05, 12 December 2022

Main Page > General Information > Configuration Examples > Router control and monitoring > Load Balancing Rules/Policies examples

Introduction

In this example, we will examine Load Balancing rules and policies and we will set up rules where all traffic from one LAN port will be going through the Mobile interface and all the traffic from the second port will be going through the Wireless/WAN or Second Sim card (if used with RUTX12).

Load Balancing is a method of dividing traffic between multiple WAN interfaces. Load Balancing can be used to share the data load between different interfaces and increase the overall Internet speed for multiple users and connections. It is important to note that Load Balancing does not increase speed for any single connection. For example, if you're downloading a large file, using Load Balancing will not increase the speed of that download.

However, Load Balancing can be used to increase the speed of multiple connections. For example, when used in a WiFi network, Load Balancing would utilize the resources of multiple WAN interfaces to handle the many various requests of different clients.

Both Load Balancing and Failover cannot be used at the same time. If you wish to select Load Balancing, you can do that in the dropdown located in the top-right corner of the page:

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Prerequisites

RUTX12 device or any other RUT device
2 SIM cards or other WAN alternatives (WiFi WAN or regular LAN cable connected to WAN port)
At least one end device (PC, Laptop, Tablet, Smartphone) to configure the routers
At least one VLAN configurated on a device

Preparation

As mentioned in Prerequisites, you will need to configure a VLAN on the RUT device, detailed instructions on how to configure it can be found on this page: VLAN Set Up Everything else we will configure along the way.

Topology

Placeholder

Configurating RUTX12 device

We will start with the RUTX12 configuration. We will configure RUTX12 traffic from LAN port 1 to go through SIM1 and traffic from LAN port 2 to go through SIM2. In order to complete this configuration you will require to have one VLAN configurated already. Let's begin by navigating to your device's WebUI → Network → Failover.

Revision as of 15:50, 8 December 2022 (view source) Edvinas.Dryzas (talk \| contribs) No edit summary ← Older edit		Revision as of 12:05, 12 December 2022 (view source) Edvinas.Dryzas (talk \| contribs) No edit summary Newer edit →
Line 35:		Line 35:

	==Configurating RUTX12 device==		==Configurating RUTX12 device==

			We will start with the RUTX12 configuration. We will configure '''RUTX12''' traffic from '''LAN''' port 1 to go through '''SIM1''' and traffic from '''LAN''' port 2 to go through '''SIM2'''. In order to complete this configuration you will require to have '''one VLAN configurated already'''. Let's begin by navigating to your device's '''WebUI → Network → Failover'''.