VLAN Inter-Zone accessibility control configuration example: Difference between revisions
Justas.Cip (talk | contribs) (Created page with "==Introduction== In this example we will show how to manage VLAN to VLAN communication with either '''one''' firewall zone or '''multiple''' firewall zones. ==Setting up VL...") |
Justas.Cip (talk | contribs) No edit summary |
||
| Line 2: | Line 2: | ||
In this example we will show how to manage VLAN to VLAN communication with either '''one''' firewall zone or '''multiple''' firewall zones. | In this example we will show how to manage VLAN to VLAN communication with either '''one''' firewall zone or '''multiple''' firewall zones. | ||
If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on '''"Advanced WebUI"''' mode. You can do that by '''clicking''' the '''"Basic"''' button '''under''' '''"Mode,"''' which is located at the top-right corner of the WebUI. | |||
[[File:Basic WebUI Advanced.gif|border|class=tlt-border|1004x1004px]] | |||
==Setting up VLANs== | ==Setting up VLANs== | ||
| Line 11: | Line 14: | ||
Created VLANs in the WebUI should look similar to this: | Created VLANs in the WebUI should look similar to this: | ||
[[File:3vlansforintervlan.png|border|class=tlt-border|]] | |||
==VLAN to VLAN communication with one firewall zone== | |||
Revision as of 11:23, 14 December 2022
Main Page > General Information > Configuration Examples > Router control and monitoring > VLAN Inter-Zone accessibility control configuration exampleIntroduction
In this example we will show how to manage VLAN to VLAN communication with either one firewall zone or multiple firewall zones.
If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode," which is located at the top-right corner of the WebUI.
Setting up VLANs
In this example, we are assuming that the VLANs are already set up, we will configure the firewall accordingly. If you need information on how to create VLANs on your device please refer to this artice: VLAN set up. For this article we have 3 separate VLANs created:
- lan | IP 192.168.1.1/24
- lan2 | IP 192.168.2.1/24
- lan3 | IP 192.168.3.1/24
Created VLANs in the WebUI should look similar to this:
