Changes

First, configure the Stunnel server. The stunnel server will listen for incoming client connections on the specified port ( 2030 for this example) and connect them to telnet port at port 23. Configure stunnel client that will be connecting to the server.  

First, configure the Stunnel server. The stunnel server will listen for incoming client connections on the specified port ( 2030 for this example) and connect them to telnet port at port 23. Configure stunnel client that will be connecting to the server.  

[[File:Networking Rut955 manual stunnel toplogy v1.png|border]]

[[File:Networking Rut955 manual Stunnel config v1.png|border]]

 

 

==Router Configuration==

==Router Configuration==

Firstly, enable local telnet access at port 23, Go to '''System → Administration → Access Control'''

Firstly, enable local telnet access at port 23, Go to '''System → Administration → Access Control'''