510
edits
Changes
Modbus and Bluetooth data sending to Node-RED (view source)
Revision as of 14:13, 16 January 2023
, 14:13, 16 January 2023no edit summary
*'''Port''': 1883
*'''Port''': 1883
*'''Keepalive''': 60
*'''Keepalive''': 60
*'''Topic''': rutx (input any preffered topic, make sure to subscribe on the same topic)
*'''Topic''': rutx (input any preferred topic, make sure to subscribe on the same topic)
[[File:Data sender settings to node red with node red broker.png|border|1000px|class=tlt-border]]
[[File:Data sender settings to node red with node red broker.png|border|1000px|class=tlt-border]]
If you would like to use MQTT broker on the Teltonika device, change '''Server: Local''' to Server: '''RUT_Broker''' (which uses the IP 192.168.10.1).
If you would like to use MQTT broker on the Teltonika device, change '''Server: Local''' to Server: '''RUT_Broker''' (which uses the IP 192.168.10.1).
==Bluetooth Data to Server via MQTT protocol==
In this section, we are going to upload Bluetooth data to server on Node-RED. The configuration is going to be similar to Modbus data to server. First of all we are going to need a Bluetooth device which is paired to Teltonika device. For this example, we are using Teltonika EYE Beacon and we have it paired to the device:
[[File:Paired beacon2 nodered.png|border|1000px|class=tlt-border]]
===Device configuration===
----
Navigate to '''Services -> Data to server.''' Add new data sender and configure settings accordingly:
*'''Enable''': on
*'''Name''': BT_data (input any preferred name)
*'''Data source''': Bluetooth data
*'''Protocol''': MQTT
*'''JSON format''': {"Data": "%b", "Hour": "%d"} - adjust this according to your needs
*'''Segment count''': All
*'''URL/Host/Connection string''': 192.168.10.139 (virtual machine address)
*'''Port''': 1883
*'''Keepalive''': 60
*'''Topic''': beacon (input any preferred topic, make sure to subscribe on the same topic)