Status Control Commands: Difference between revisions

From Teltonika Networks Wiki
No edit summary
No edit summary
 
Line 1: Line 1:
== Status  Control  Commands ==
== Status  Control  Commands ==


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=39&zoom=100,68,232 AT+CPAS Mobile Equipment Activity Status]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=39&zoom=100,68,232 AT+CPAS Mobile Equipment Activity Status]===
 
----
TheExecutionCommand queries the module‟s activity status.
TheExecutionCommand queries the module‟s activity status.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=40&zoom=100,68,470 AT+CEER Extended Error Report]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=40&zoom=100,68,470 AT+CEER Extended Error Report]===
 
----
The commandis used to query an extended error and report the cause of the last failed operation, such as:
The commandis used to query an extended error and report the cause of the last failed operation, such as:
* the failure to release a call;
* the failure to release a call;
Line 17: Line 17:
The release cause '''<text>''' is a text to describe the cause information given by the network.
The release cause '''<text>''' is a text to describe the cause information given by the network.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=41&zoom=100,68,346 AT+QCFG Extended Configuration Settings]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=41&zoom=100,68,346 AT+QCFG Extended Configuration Settings]===
 
----
The command is used to query and configure various settings of UE.
The command is used to query and configure various settings of UE.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=42&zoom=100,68,684 AT+QCFG="gprsattach" GPRS Attach Mode Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=42&zoom=100,68,684 AT+QCFG="gprsattach" GPRS Attach Mode Configuration]===
 
----
The  command specifies  the  mode  to  attach GPRS when  UE  is  powered  on.  This  configuration  is  valid only after the module is restarted.
The  command specifies  the  mode  to  attach GPRS when  UE  is  powered  on.  This  configuration  is  valid only after the module is restarted.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=43&zoom=100,68,370 AT+QCFG="nwscanmode" Network Search Mode Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=43&zoom=100,68,370 AT+QCFG="nwscanmode" Network Search Mode Configuration]===
 
----
The  commands pecifies  the network  mode  to  be  serached.  If '''<effect>''' is  omitted,  the  configuration  will take effect immediately.
The  commands pecifies  the network  mode  to  be  serached.  If '''<effect>''' is  omitted,  the  configuration  will take effect immediately.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=44&zoom=100,68,285 AT+QCFG="nwscanseq" Network Searching Sequence Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=44&zoom=100,68,285 AT+QCFG="nwscanseq" Network Searching Sequence Configuration]===
 
----
The  command specifies  the  sequence  of  searching  network. This  configuration  is  valid  only  after  the module is restarted.
The  command specifies  the  sequence  of  searching  network. This  configuration  is  valid  only  after  the module is restarted.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,97 AT+QCFG="roamservice" Roam Service Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,97 AT+QCFG="roamservice" Roam Service Configuration]===
 
----
The command is used to enable or disable the roam service. If '''<effect>''' is omitted, the configuration will take effect immediately.
The command is used to enable or disable the roam service. If '''<effect>''' is omitted, the configuration will take effect immediately.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,808 AT+QCFG="servicedomain" Service Domain Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,808 AT+QCFG="servicedomain" Service Domain Configuration]===
 
----
The command specifies the registered service domain. If '''<effect>''' is omitted, the configuration will take effect immediately.
The command specifies the registered service domain. If '''<effect>''' is omitted, the configuration will take effect immediately.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=46&zoom=100,68,598 AT+QCFG="band" Band Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=46&zoom=100,68,598 AT+QCFG="band" Band Configuration]===
 
----
The command specifies the preferred frequency bands to be searched of UE. If '''<effect>''' is omitted, the configuration will take effect immediately.
The command specifies the preferred frequency bands to be searched of UE. If '''<effect>''' is omitted, the configuration will take effect immediately.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,156 AT+QCFG="hsdpacat" HSDPA Category Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,156 AT+QCFG="hsdpacat" HSDPA Category Configuration]===
 
----
The command specifies the HSDPA category. This configuration is valid only after the module is restarted.
The command specifies the HSDPA category. This configuration is valid only after the module is restarted.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,834 AT+QCFG="hsupacat" HSUPA Category Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,834 AT+QCFG="hsupacat" HSUPA Category Configuration]===
 
----
The command specifies the HSUPA category. This configuration is valid only after the module is restarted.
The command specifies the HSUPA category. This configuration is valid only after the module is restarted.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=49&zoom=100,68,474 AT+QCFG="rrc" RRC Release Version Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=49&zoom=100,68,474 AT+QCFG="rrc" RRC Release Version Configuration]===
 
----
The  command specifies  the  RRC  release  version.  This  configuration  is  valid  only  after  the  module  is restarted.
The  command specifies  the  RRC  release  version.  This  configuration  is  valid  only  after  the  module  is restarted.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,202 AT+QCFG="sgsn" UE SGSN Release Version Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,202 AT+QCFG="sgsn" UE SGSN Release Version Configuration]===
 
----
The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.
The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,817 AT+QCFG="msc" UE MSC Release Version Configuration]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,817 AT+QCFG="msc" UE MSC Release Version Configuration]===
 
----
The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted.
The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=51&zoom=100,68,496 AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=51&zoom=100,68,496 AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN]===
 
----
The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.
The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=52&zoom=100,68,201 AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=52&zoom=100,68,201 AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented]===
 
----
'''AT+QCFG="urc/ri/ring"''', '''AT+QCFG="urc/ri/smsincoming"''' and '''AT+QCFG="urc/ri/other"control''' the RI  (ring  indicator)  behavior  when  a  URC  is  reported.  These  configurations  will  be  stored  into  NV automatically.  The  ring  indicator  is  active  low. '''AT+QCFG="urc/ri/ring"''' specifies  the  RI  behavior  when URC '''RING''' is presented to indicate an incoming call.
'''AT+QCFG="urc/ri/ring"''', '''AT+QCFG="urc/ri/smsincoming"''' and '''AT+QCFG="urc/ri/other"control''' the RI  (ring  indicator)  behavior  when  a  URC  is  reported.  These  configurations  will  be  stored  into  NV automatically.  The  ring  indicator  is  active  low. '''AT+QCFG="urc/ri/ring"''' specifies  the  RI  behavior  when URC '''RING''' is presented to indicate an incoming call.


Line 76: Line 76:
indications when a call is coming.
indications when a call is coming.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=54&zoom=100,68,97 AT+QCFG="urc/ri/smsincoming" RIBehavior WhenIncoming SMSURCs are Presented]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=54&zoom=100,68,97 AT+QCFG="urc/ri/smsincoming" RIBehavior WhenIncoming SMSURCs are Presented]===
 
----
The  command specifies the RI  (ring  indicator) behavior  when  related  incoming  message  URCs  are presented. Related incoming message URCs list: '''+CMTI''','''+CMT''','''+CDS''' and '''+CBM'''.
The  command specifies the RI  (ring  indicator) behavior  when  related  incoming  message  URCs  are presented. Related incoming message URCs list: '''+CMTI''','''+CMT''','''+CDS''' and '''+CBM'''.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,97 AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,97 AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented]===
 
----
The command specifies the RI (ring indicator)behavior when other URCs are presented.
The command specifies the RI (ring indicator)behavior when other URCs are presented.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,810 AT+QCFG="risignaltype" RISignal Output Carrier]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,810 AT+QCFG="risignaltype" RISignal Output Carrier]===
 
----
The command specifies the RI (ring indicator) signal output carrier.
The command specifies the RI (ring indicator) signal output carrier.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=56&zoom=100,68,640 AT+QCFG="urc/delay"Delay URC Indication]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=56&zoom=100,68,640 AT+QCFG="urc/delay"Delay URC Indication]===
 
----
The commandcan delay the output ofURC indication until ring indicatorpulse ends.
The commandcan delay the output ofURC indication until ring indicatorpulse ends.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=57&zoom=100,68,366 AT+QCFG="urc/cache"URC Cache Function]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=57&zoom=100,68,366 AT+QCFG="urc/cache"URC Cache Function]===
 
----
==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=58&zoom=100,68,709 AT+QCFG="tone/incoming"Ring tone Function]==
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=58&zoom=100,68,709 AT+QCFG="tone/incoming"Ring tone Function]===
----
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=59&zoom=100,68,708 AT+QINDCFG URC Indication Configuration]===
----
The command is used to control URC indication.


==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=59&zoom=100,68,708 AT+QINDCFG URC Indication Configuration]==
The command is used to control URC indication.
[[Category:TRM240 AT Commands]]
[[Category:TRM240 AT Commands]]

Latest revision as of 09:00, 2 March 2023

TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Status Control Commands

Status Control Commands

AT+CPAS Mobile Equipment Activity Status


TheExecutionCommand queries the module‟s activity status.

AT+CEER Extended Error Report


The commandis used to query an extended error and report the cause of the last failed operation, such as:

  • the failure to release a call;
  • the failure to set up a call (both mobile originated or terminated);
  • the failure to modify a call by using supplementary services;
  • the failure to activate, register, query, deactivate or deregister a supplementary service;
  • the failureto attach GPRS or the failureto activatea PDP context;
  • the failureto detach GPRS or the failureto deactivate a PDP context.

The release cause <text> is a text to describe the cause information given by the network.

AT+QCFG Extended Configuration Settings


The command is used to query and configure various settings of UE.

AT+QCFG="gprsattach" GPRS Attach Mode Configuration


The command specifies the mode to attach GPRS when UE is powered on. This configuration is valid only after the module is restarted.

AT+QCFG="nwscanmode" Network Search Mode Configuration


The commands pecifies the network mode to be serached. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="nwscanseq" Network Searching Sequence Configuration


The command specifies the sequence of searching network. This configuration is valid only after the module is restarted.

AT+QCFG="roamservice" Roam Service Configuration


The command is used to enable or disable the roam service. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="servicedomain" Service Domain Configuration


The command specifies the registered service domain. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="band" Band Configuration


The command specifies the preferred frequency bands to be searched of UE. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="hsdpacat" HSDPA Category Configuration


The command specifies the HSDPA category. This configuration is valid only after the module is restarted.

AT+QCFG="hsupacat" HSUPA Category Configuration


The command specifies the HSUPA category. This configuration is valid only after the module is restarted.

AT+QCFG="rrc" RRC Release Version Configuration


The command specifies the RRC release version. This configuration is valid only after the module is restarted.

AT+QCFG="sgsn" UE SGSN Release Version Configuration


The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.

AT+QCFG="msc" UE MSC Release Version Configuration


The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted.

AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN


The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.

AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented


AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/smsincoming" and AT+QCFG="urc/ri/other"control the RI (ring indicator) behavior when a URC is reported. These configurations will be stored into NV automatically. The ring indicator is active low. AT+QCFG="urc/ri/ring" specifies the RI behavior when URC RING is presented to indicate an incoming call.

The sum of parameter <activeduration> and <inactiveduration> determines the interval time of “RING” indications when a call is coming.

AT+QCFG="urc/ri/smsincoming" RIBehavior WhenIncoming SMSURCs are Presented


The command specifies the RI (ring indicator) behavior when related incoming message URCs are presented. Related incoming message URCs list: +CMTI,+CMT,+CDS and +CBM.

AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented


The command specifies the RI (ring indicator)behavior when other URCs are presented.

AT+QCFG="risignaltype" RISignal Output Carrier


The command specifies the RI (ring indicator) signal output carrier.

AT+QCFG="urc/delay"Delay URC Indication


The commandcan delay the output ofURC indication until ring indicatorpulse ends.

AT+QCFG="urc/cache"URC Cache Function


AT+QCFG="tone/incoming"Ring tone Function


AT+QINDCFG URC Indication Configuration


The command is used to control URC indication.