BAG·Tower

BAG·Tower is a monitoring and prevention platform that is compatible with Teltonika-Networks devices. Their main goal is to provide a complete solution to control your equipment, manage your asset fleet and its operations.

Introduction

This article contains step-by-step instructions on how to connect a Teltonika-Networks device to BAG·Tower platform.

Basic setup

1. Create a BAG·Tower account.
2. Create an asset on BAG·Tower platform.
3. Connect device to BAG·Tower platform.
4. Create a decoder for the device.

Create an account

---

First of all, you will need to create your BAG·Tower account.

• Register an account on BAG·Tower.
• Go to your registered email account, find the email from BAG·Tower and click on the Signup now by clicking here link.

• In the new window enter a new Password and press Send.

• Now you should have access to BAG·Tower platform.

Create an asset

---

Set up BAG·Tower asset for your Teltonika-Networks device.

• Login into your BAG·Tower account.
• In Asset Management -> Your assets -> Asset List press Add Asset button.

• In the popup window press Create an Asset Manually button.

• Enter your assets Name and press the Save button.

• After saving the new Asset should appear in the Asset List.

Connect device to BAG·Tower

---

Connect Teltonika-Networks device to the created BAG·Tower asset.

• Go to the Details page of the created BAG·Tower asset in Asset Management -> Your assets -> Asset List.
• In the Asset Detail page copy the generated API Key.

• Log in to Teltonika-Networks device and navigate to System -> CLI. Login using these credentials: Username - root, Password - Your device Admin password. If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode," which is located at the top-right corner of the WebUI. Alternatively you can connect to your device through your terminal using ssh (Secure shell) command:

  ssh root@<device_ip_address> 

  When asked follow the directions and enter yes and Your device Admin Password.

• Run the following command with __API_KEY__ option replaced by the previously copied assets API Key:

sh -c "$(wget -qO - https://scripts.bagtower.bag-era.fr/install_push_teltonika.sh)" '' __API_KEY__ 

• After you execute that command you should get a similar response:

install script version 1.4.4
Configuring your asset ...
.. configuration ok
pushing data ..

push script version 1.4.4

** getting asset info ...
      getting TRB141 data
   .. ok 

** pushing asset info ...
600: 600
   .. done 

** updating crontab ...
      asset_period: 600 seconds
   .. done 
.. data pushed
!! all set !!!

• Now your device should start sending information to the BAG·Tower platform. You should see your assets status change to Anomaly detected in the platforms page Asset Management -> Your assets -> Asset List. This is because there is no decoder configured for that asset or group.

Create a decoder

---

Create a BAG·Tower decoder so that BAG·Tower platform can understand information from Teltonika-Networks device.

• To understand the information that is being sent from the device, BAG·Tower needs to have a decoder configured. To configure it go to BAG·Tower platform page and in Asset Management -> Your assets -> Asset List click on Detail > button of an asset with the Status showing as Anomaly detected.

• In the Asset Details page click Create a Decoder button.

• Change the name of the Decoder. Download Teltonika decoder file and replace the Code section content with the content from Teltonika decoder. Select an Asset and a Frame. You can get the latest version of Teltonika decoder from the BAG·Tower page or through this link.

• Press Test Decoder and wait for the test to finish.

• Then click on Save and Attach.

• In the opened dialog window choose the Asset, Tag or Group to attach this decoder to and click the Save button.

Results

If everything was done correctly now you should be all set and your device information should now periodically update in the Asset Details page. Your Teltonika-Networks device asset in BAG·Tower platform should now be shows as Online and its Detail page should now show graphs with information from that device.

If that is not the case try repeating these steps or contacting support for more information and help.

References/See Also

BAG·Tower official site: https://www.getbagtower.com/en/home

BAG·Tower guide to connecting Teltonika asset: https://bagtower.tawk.help/en-us/article/connecting-teltonika-asset

BAG·Tower guide to connecting Teltonika asset for the first time: https://bagtower.tawk.help/en-us/article/connecting-my-first-teltonika-asset

BAG·Tower API documentation: https://doc.api.bagtower.bag-era.fr/

BAG·Tower YouTube channel: https://www.youtube.com/channel/UC0XXHWkTk_fgwIqP77loPJA

BAG·Tower Gateways Teltonika: https://www.getbagtower.com/gateways-teltonika