Template:Networking rutos manual network: Difference between revisions

Revision as of 10:45, 15 March 2023

Template:Networking rutos manual fw disclosure

Summary

The Network page contains information related to the device's networking. This chapter is an overview of the Network page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

LAN

This tab displays information about the device's local network(s). The figure below is an example of the Network window:

lan information
Name	LAN interface name
IP address	IP address of the LAN interface
Netmask	Netmask of the LAN interface. In a sense, a netmask specifies the size of a network. In other words, it indicates which part of the IP address denotes the network, and which denotes the device
dhcp leases
Hostname	Hostname of a LAN client
IP Address	IP address of a LAN client
MAC Address	MAC address of a LAN client
Leasetime Remaining	Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes.

[[Category:{{{name}}} Status section]]

@@ Line 21: / Line 21: @@
 The <b>Mobile</b> tab displays information about the mobile connection. The figure below is an example of the Mobile tab:
 {{#switch: {{{series}}}
-| RUTX =
+| RUTX | RUTM =
    {{#switch: {{{name}}}
     | RUTX09|RUTX11|RUTXR1|RUTX50|RUTM09|RUTM11|RUTM50 = [[File:Networking rutx manual network mobile v3.png|border|class=tlt-border]]