Difference between revisions of "Mobile Parameters to HTTP Server"
From Teltonika Networks Wiki
Line 7: | Line 7: | ||
This article provides step-by-step instructions on how to write the script, programs that | This article provides step-by-step instructions on how to write the script, programs that | ||
are required, and how to run it. | are required, and how to run it. | ||
+ | |||
+ | |||
+ | ---- | ||
+ | * First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings. | ||
+ | [[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]] | ||
+ | ---- |
Revision as of 11:34, 6 April 2023
Introduction
Mobile parameters are needed to measure signal features that can be acquired using gsmctl commands. However, there is no available command to check/display all of the desired details.
With that said, a custom script is needed to show them using one command. This article provides step-by-step instructions on how to write the script, programs that are required, and how to run it.
- First you want to make sure that you have ADVANCED mode enabled. This will allow you to choose from a larger variety of settings.