Mobile Parameters to HTTP Server: Difference between revisions
No edit summary |
|||
| Line 13: | Line 13: | ||
[[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]] | [[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]] | ||
---- | ---- | ||
==Prerequisites== | |||
For this particular configuration you will need: | |||
* A Gateway or a Router with GSM (RUTX14 is being used in the example) | |||
* 1 SIM card | |||
* 1 PC | |||
* HTTP Server (Hercules) | |||
Revision as of 10:37, 6 April 2023
Introduction
Mobile parameters are needed to measure signal features that can be acquired using gsmctl commands. However, there is no available command to check/display all of the desired details.
With that said, a custom script is needed to show them using one command. This article provides step-by-step instructions on how to write the script, programs that are required, and how to run it.
- First you want to make sure that you have ADVANCED mode enabled. This will allow you to choose from a larger variety of settings.
Prerequisites
For this particular configuration you will need:
- A Gateway or a Router with GSM (RUTX14 is being used in the example)
- 1 SIM card
- 1 PC
- HTTP Server (Hercules)