92
edits
Changes
RUTX12 Traffic control with Firewall WANzone Splitting (view source)
Revision as of 07:06, 15 September 2023
, 07:06, 15 September 2023.
To establish the traffic rule according to the zones you've set up, follow these steps '''Navigate to Network –> Firewall -> Traffic Rule''' to begin creating the rule. Create and set up the rule to enable the host's access to the web server.
To establish the traffic rule according to the zones you've set up, follow these steps '''Navigate to Network –> Firewall -> Traffic Rule''' to begin creating the rule. Create and set up the rule to enable the host's access to the web server.
* In the '''<nowiki/>'Add type'''' field, select 'Add new forward rule'.
* In the '''<nowiki/>'''Add type field, select '''<nowiki/>'Add new forward rule''''.
* Assign a '''Name''' of your choosing to this rule.
* Assign a Name of your choosing to this rule.
* Choose "'''LAN'''" as the source zone.
* Choose "'''LAN'''" as the source zone.
* Select "'''WAN2'''" as the destination zone.
* Select "'''WAN2'''" as the destination zone.
* Click the 'Add' button to confirm and add the rule.
* Click the ''''Add'''<nowiki/>' button to confirm and add the rule.
[[File:Add new Instance.png|border|center|class=tlt-border]]
[[File:Add new Instance.png|border|center|class=tlt-border]]
* Source zone change to "'''WAN2:mob1s2a1"'''
* Source zone change to "'''WAN2:mob1s2a1"'''
* Specify the source zone for which the SIM Interface is intended. In the provided instance, this would be '''SIM2''' labelled as "'''mob2s1a1'''".
* Specify the source zone for which the SIM Interface is intended. In the provided instance, this would be '''SIM2''' labelled as "'''mob1s2a1'''".
* Choose the '''MAC address''' associated with the host to which the rule is to be applied in the source MAC address section. If needed, you can input a custom MAC address.
* Choose the '''MAC address''' associated with the host to which the rule is to be applied in the source MAC address section. If needed, you can input a custom MAC address.
* Input the '''IP address''' of the host in the source IP address field.
* Input the '''IP address''' of the host in the source IP address field.