Template:Networking tswos manual ports: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
(Created page with "{{Template: Networking_rutos_manual_fw_disclosure | fw_version ={{Template: Networking_rutos_manual_latest_fw | series = {{{series}}} | name = {{{name}}} }} }} __TOC__ ==...")
 
No edit summary
Line 29: Line 29:
     <tr>
     <tr>
       <td>LLDP frame filter</td>
       <td>LLDP frame filter</td>
       <td><span style="color:red">off</span> {{!}} on; default: <b>off</b></td>
       <td>off {{!}} on; default: <b>off</b></td>
       <td>Enable to stop the forwarding of LLDP frames.</td>
       <td>Enable to stop the forwarding of LLDP frames.</td>
     </tr>
     </tr>
Line 42: Line 42:
The figure below is an example of the '''All Ports''' window, color indicates port speed and status:
The figure below is an example of the '''All Ports''' window, color indicates port speed and status:


[[File:Networking_tswos_manual_ports_ports_settings_port_settings.png|border|class=tlt-border]]
[[File:Networking_tswos_manual_ports_ports_settings_port_settings_{{{poe}}}.png|border|class=tlt-border]]


To change port settings select port and press `edit (number of ports) ports` button:
To change port settings select port and press `edit (number of ports) ports` button:


[[File:Networking_tswos_manual_ports_ports_settings_port_settings_edit.png|border|class=tlt-border]]
[[File:Networking_tswos_manual_ports_ports_settings_port_settings_edit_{{{poe}}}.png|border|class=tlt-border]]


You will be redirected to `Port settings`. From here you can enable/disable ports or change settings:
You will be redirected to `Port settings`. From here you can enable/disable ports or change settings:


[[File:Networking_tswos_manual_ports_ports_settings_port_settings_settings.png|border|class=tlt-border]]
[[File:Networking_tswos_manual_ports_ports_settings_port_settings_settings_{{{poe}}}.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 164: Line 164:
[[File:Networking_tswos_manual_ports_port_mirroring_edit.png|border|class=tlt-border]]
[[File:Networking_tswos_manual_ports_port_mirroring_edit.png|border|class=tlt-border]]


You will be redirected to `Port mirroring settings`. From here you can select ingress and egress ports:
You will be redirected to `Port mirroring settings`, from here you can select ingress and egress ports:


[[File:Networking_tswos_manual_ports_port_mirroring_configuration.png|border|class=tlt-border]]
[[File:Networking_tswos_manual_ports_port_mirroring_configuration.png|border|class=tlt-border]]
Line 226: Line 226:
<li><b>STP:</b> STP must be disabled in Network -> Spanning Tree and loopback detection must be enabled for the service to function.</li>
<li><b>STP:</b> STP must be disabled in Network -> Spanning Tree and loopback detection must be enabled for the service to function.</li>
<li><b>Port unblocking:</b> When a loop occurs before a broadcast, it won't be recognized until the broadcast transmits its own packets, since the service only listens for packets with its own particular protocol.</li>
<li><b>Port unblocking:</b> When a loop occurs before a broadcast, it won't be recognized until the broadcast transmits its own packets, since the service only listens for packets with its own particular protocol.</li>
[[File:Networking_tswos_manual_ports_loopback_detection_port_tracking.png|border|class=tlt-border]]
To change port tracking setting press on port and you will be redirected to `Port tracking configuration`:
[[File:Networking_tswos_manual_ports_loopback_detection_port_tracking_configuration.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>on</b></td>
      <td>Enable port tracking.</td>
    </tr>
    <tr>
      <td>Recovery mode</td>
      <td>Auto {{!}} Manual; default: <b>Auto</b></td>
      <td>Manages port unblocking type.Possible modes:
        <li>Manual: Port is blocked until manual unblock.</li>
        <li>Auto: Unblocked automatically depending on the global Auto-recovery interval value.</li>
        </td>
    </tr>
</table>
==Port Security==
This section displays information about the status of the device's ports with the ability to configure port security settings.
===General===
====Port Settings====
----
The figure below is an example of the '''Port Settings''' window, color indicates port speed and status:
[[File:Networking_tswos_manual_ports_port_security_port_settings_{{{poe}}}.png|border|class=tlt-border]]
To change port security settings select port and press `edit (number of ports) ports` button:
[[File:Networking_tswos_manual_ports_port_security_port_settings_edit_{{{poe}}}.png|border|class=tlt-border]]
You will be redirected to `Port security settings`. From here you can enable/disable ports or change security settings:
[[File:Networking_tswos_manual_ports_port_security_port_settings_settings_{{{poe}}}.png|border|class=tlt-border]]
<table class="nd-mantable">
    <tr>
        <th>Field</th>
      <th>Value</th>
      <th>Description</th>
    </tr>
    <tr>
      <td>Enable</td>
      <td>off {{!}} on; default: <b>off</b></td>
      <td>Enable security for port.</td>
    </tr>
    <tr>
      <td>Radius sever</td>
      <td>radius server ID; default: <b>example</b></td>
      <td>Radius server ID.</td>
    </tr>
    <tr>
      <td>Radius unreachable action</td>
      <td>Accept {{!}} Reject; default: <b>Accept</b></td>
      <td>"Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it.</td>
    </tr>
</table>
===Port Status===
----
This section displays port status information. There is also an option to select, enable ports security, choose RADIUS server and change RADIUS unreachable action:
[[File:Networking_tswos_manual_ports_port_security_port_status.png|border|class=tlt-border]]
<table class="nd-othertables_2">
    <tr>
        <th width="250">Field Name</th>
        <th width="900">Description</th>
    </tr>
    <tr>
        <td>Port</td>
        <td>Port ID.</td>
    </tr>
    <tr>
        <td>Enabled</td>
        <td>Enables port security on this port.</td>
    </tr>
    <tr>
        <td>Status</td>
        <td>Port status.</td>
    </tr>
    <tr>
        <td>Radius server</td>
        <td>Authenticates and authorizes devices trying to connect to this port.</td>
    </tr>
    <tr>
        <td>Radius unreachable action</td>
        <td>"Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it.</td>
    </tr>
</table>




[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]

Revision as of 13:05, 13 October 2023

Template:Networking rutos manual fw disclosure

Summary

The Ports page provides information related to the status of the device's physical ports, as well as the ability to edit port settings, security, loopback detection.

General

In this section you can enable Jubo frames and LLDP frame filter services.

Field Value Description
Jumbo frames off | on; default: on Allow ethernet frame with a payload greater than the standard maximum transmission unit (MTU) of 1500 bytes. This may improve network performance by making data transmissions more efficient.
LLDP frame filter off | on; default: off Enable to stop the forwarding of LLDP frames.

Port Settings

This section displays information about the status of the device's ports with the ability to configure port settings.

Port Settings

The figure below is an example of the All Ports window, color indicates port speed and status:

[[File:Networking_tswos_manual_ports_ports_settings_port_settings_{{{poe}}}.png|border|class=tlt-border]]

To change port settings select port and press `edit (number of ports) ports` button:

[[File:Networking_tswos_manual_ports_ports_settings_port_settings_edit_{{{poe}}}.png|border|class=tlt-border]]

You will be redirected to `Port settings`. From here you can enable/disable ports or change settings:

[[File:Networking_tswos_manual_ports_ports_settings_port_settings_settings_{{{poe}}}.png|border|class=tlt-border]]

Field Value Description
Enable off | on; default: on Toggle port on or off.
EEE off | on; default: on Enable Energy-Efficient Ethernet.
Isolate port off | on; default: off When enabled port will be isolated from other isolated ports. Traffic between isolated ports will droped. Traffic between isolated and normal ports will be sent as normal.
Link speed Auto | 10Mbps (E) | 100Mbps (FE) | 1000Mbps (GbE); default: Auto A measure of how fast ports are able to transmit and receive data.
Duplex Full | Half; default: Advertises preferred duplex mode and speed for negotiation with other devices.

Port Status

This section displays port status information. There is also an option to select, enable ports, enable/disable PoE, EEE and Isolation options:

[[File:Networking_tswos_manual_ports_ports_settings_port_status_{{{poe}}}.png|border|class=tlt-border]]

Field Name Description
Port Port ID.
Enabled Enable/Disable port.
Status Port status.
Speed Port link speed.
  • Possible speeds:
  • GbE: 1000Mbps
  • FE: 100Mbps
  • E: 10Mbps
    		•
    PoE (W) PoE port power usage in watts.
    EEE Enable/Disable Energy-Efficient Ethernet.
    Isolation When enabled port will be isolated from other isolated ports. Traffic between isolated ports will be droped. Traffic between isolated and normal ports will be sent as normal.
    TX sum Total upload.
    RX sum Total download.
    TX rate Upload speed.
    RX rate Download speed.

    Port Mirroring

    Port Mirroring is a service that mirrors incoming and outgoing packets on one Ethernet port (Source Port) to another (Monitoring Port).

    To change port mirroring settings select port and press `Edit` button:

    You will be redirected to `Port mirroring settings`, from here you can select ingress and egress ports:

    Field Value Description
    Enable off | on; default: off The port which will mirror the packets.
    Ingress mirroring port list port; default: none Specify which port incoming traffic is mirrored.
    Egress mirroring port list port; default: none Specify which port outcoming traffic is mirrored.

    Loopback Detection

    Loopback Detection

    A port-based loopback detection service that using its own distinctive packets, seeks to identify and break a network loop by shutting down troublesome ports.

    Field Value Description
    Enable off | on; default: off Enable loopback detection.
    Broadcast interval integer [1..10000]; default: none Send detection packets in an given interval from 1 to 10000 seconds.
    Auto-recovery interval integer [60..10000]; default: none Restores disabled ports in an given interval from 60 to 10000 seconds.

    Port Tracking

    Tracks specific port status. Notes:

  • STP: STP must be disabled in Network -> Spanning Tree and loopback detection must be enabled for the service to function.
  • Port unblocking: When a loop occurs before a broadcast, it won't be recognized until the broadcast transmits its own packets, since the service only listens for packets with its own particular protocol.

    • To change port tracking setting press on port and you will be redirected to `Port tracking configuration`:

    Field Value Description
    Enable off | on; default: on Enable port tracking.
    Recovery mode Auto | Manual; default: Auto Manages port unblocking type.Possible modes:
  • Manual: Port is blocked until manual unblock.
  • Auto: Unblocked automatically depending on the global Auto-recovery interval value.
    		•

    Port Security

    This section displays information about the status of the device's ports with the ability to configure port security settings.

    General

    Port Settings

    The figure below is an example of the Port Settings window, color indicates port speed and status:

    [[File:Networking_tswos_manual_ports_port_security_port_settings_{{{poe}}}.png|border|class=tlt-border]]

    To change port security settings select port and press `edit (number of ports) ports` button:

    [[File:Networking_tswos_manual_ports_port_security_port_settings_edit_{{{poe}}}.png|border|class=tlt-border]]

    You will be redirected to `Port security settings`. From here you can enable/disable ports or change security settings:

    [[File:Networking_tswos_manual_ports_port_security_port_settings_settings_{{{poe}}}.png|border|class=tlt-border]]

    Field Value Description
    Enable off | on; default: off Enable security for port.
    Radius sever radius server ID; default: example Radius server ID.
    Radius unreachable action Accept | Reject; default: Accept "Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it.

    Port Status

    This section displays port status information. There is also an option to select, enable ports security, choose RADIUS server and change RADIUS unreachable action:

    Field Name Description
    Port Port ID.
    Enabled Enables port security on this port.
    Status Port status.
    Radius server Authenticates and authorizes devices trying to connect to this port.
    Radius unreachable action "Accept" gives anyone access to the port when the radius server is unreachable. "Reject" only unblocks the port if radius server explicitly authorizes it.


    [[Category:{{{name}}} Network section]]

    Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_tswos_manual_ports&oldid=113738"