RUT906 Firmware Downloads: Difference between revisions

From Teltonika Networks Wiki
m (Text replacement - "*** Improved events log loading logic to reduce device load in certain pages" to "*** Improved asynchronous pagination in events log pages *** Optimized Overview page load *** Added resource loading cancellation after switching to different page")
Tags: Mobile edit Mobile web edit
No edit summary
Line 6: Line 6:


==Changelog==
==Changelog==
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.6/RUT9M/RUT9M_R_00.07.06_WEBUI.bin RUT9M_R_00.07.06]</span></b> | 2023.12.20===
* <b>New</b>
** <b>Network</b>
*** Enabled IPv6 by default for mobile interfaces
*** Added operator blacklisting and whitelisting based on mobile country code
*** Added SIM card not inserted event in Events Log
*** Added 802.11v BSS Transition Management and 802.11k Radio Resource Measurement
** <b>Services</b>
*** Added OPC UA Server
*** Added the ability to set port for TACACS+ in PAM service
*** Added switch to enable using root certificate authority for MQTT alarms in Modbus Client services
*** Added new alarm action "Ubus event" in Modbus Client services
*** Added new input "Modbus alarms" in Data to Server service
*** Added wget ping subtype support in Events Reporting service
*** Added new I/O SNMP OID that returns numeric I/O state
*** Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device
*** Added TLS support for OverIP serial functionality
** <b>WebUI</b>
*** Added Tailscale VPN support
*** Renewed user interface design
*** Added network interface name change functionality
*** Added last resort configuration option for multiwan policy rules
*** Added indication when new modem firmware is available
*** Added mobile connection establishment display in mobile status page
*** Added default value for "Reset threshold" field in Low Signal Reconnect feature
** <b>System</b>
*** Added ability to enable/disable SSH access for specific users in System Users
*** API support
*** Added new ADC IC “TLA2021” support
*** Added new Serial IC “CH343” support
* <b>Improvements</b>
** <b>Network</b>
*** Disabled operator scan when SIM card is not inserted
** <b>Services</b>
*** Expanded GRE VPN keep alive functionality to disable routes from unreachable tunnel
*** Added PKCS#12 certificate container authentication method in IPsec VPN
*** Added TLV message_payload support for SNMP service
*** Added Purple.ai configuration profile
*** Replaced option "No leading zeros" with "Remove all zeros" in Over IP serial functionality
*** Added possibility to assign mobile interface in SQM service
*** Added reboot on storage device disappearance and re-appearance
*** Added additional anonymous phone number validation in Mobile Utilities service
*** Added "N/A" signal strength response in DNP3 service if SIM card is not inserted
** <b>WebUI</b>
*** Improved Events Log page loading by adding asynchronous pagination (pasikeitė puslapiavimo logika nei prieš tai buvusi)
*** Removed requirement for Diffie-Hellman parameters in OpenVPN service
*** Added improvements for creating OpenVPN IPv6 configurations
*** Added auto redirect after changing router's IP address or port
*** Added "Interface" dropdown for interfaces selection in Wake on LAN service
*** Increased Data to Server service MQTT topic length limit to 65535 characters
*** Added OSPF external routes section to Status page
*** Moved device menu entry “Reboot” to header menu
*** Added indication in Overview, Status -> Mobile and WAN pages when mobile data limit is reached
*** Updated Operator state field to show if modem is in limited service
*** Combined Mobile Usage day, week, month and total pages into one
*** Updated Realtime data -> Mobile signal page design to show all available modems and their bands data in one graph
*** Added message when SIM card requires PIN/PUK code in Status -> Mobile page
*** Moved WiFi scanner page to Services section
** <b>System</b>
*** Added Mosquitto CVE patch 2023-28366
*** Added Mosquitto CVE patch 2023-3592
*** Updated cURL version to 8.4.0
*** Updated kernel version to 5.4.259
*** Added RMS data display to generated troubleshoot
*** Added downloaded Package Manager packages list to generated troubleshoot
*** Added process activity load list to generated troubleshoot
*** Changed default OPKG feed to use Teltonika's URL
* <b>Fix</b>
** <b>Network</b>
*** Fixed DMVPN firewall rule creation issues
*** Fixed Failover missing active rules when using multiple source and destination IP addresses
*** Fixed mobile service crash due to buffer overflow while reading partially overwritten SMS
*** Fixed an issue with Manual APN connection making attempts too rapidly
*** Fixed deny data roaming functionality when transitioning between roaming and home operator network
*** Fixed network disconnection on mobile network detach and DHCP lease loss situations
*** Fixed VoLTE configuration after modem reboot
*** Fixed Mobile interface bridge and passthrough mode connectivity loss
*** Fixed an issue where rarely PIN code would get removed after SIM switch
*** Fixed mobile operator list being not updated after changes in WebUI
*** Fixed issue where mobile interface was unreachable after device reboot or interface restart while using Failover service
*** Fixed wireless client authentication failures when using AP and STA with WPA3-SAE authentication
*** Fixed STA connection failure to AP with hidden SSID using WPA3-SAE authentication
*** Fixed incorrect signal strength values in Wireless scan results
** <b>Services</b>
*** Fixed SSH module enable in PAM service
*** Added minimum free space check when saving logs to flash in Logging service
*** Fixed "Set multiple coils" function sending too many bytes in Modbus Client services
*** Fixed multiple Events Reporting messages being sent when Firewall configuration is changed
*** Fixed VRRP instances advertising wrong virtual IPs
*** Added Hotspot information in SNMP MIB file
*** Fixed registered Hotspot Local Users showing random username
*** Fixed selection of MAC Auth for LAN interfaces in Hotspot service
*** Fixed inconsistent Hotspot login behaviour when using MAC Auth with Password
*** fixed instance shutdown after last local user deletion
*** Fixed Cumulocity app not sending any telemetry data
*** Fixed Call Utilities failure when caller id is hidden during a call
*** Fixed AVL with poor mobile connections
*** Fixed default profile SMS Utilities I/O status rule configuration in Profiles functionality
*** Fixed serial timeout not working in Over IP serial functionality
*** Removed "Echo" option in Modbus TCP over Serial functionality
*** Fixed CRC verification failing when CRC is correct in Modbus TCP over Serial functionality
*** Fixed crash when getting unexpected messages from RTU in Modbus TCP over Serial functionality
*** Fixed RMS I/O data display to return values calculated by formula
** <b>WebUI</b>
*** Fixed side menu style issues when Japanese language is used
*** Fixed displaying of vendor names in Topology page
*** Fixed language packs being selectable when still in Package Manager queue
*** Added ability to configure IPv6 BGP peer
*** Fixed RelayD configuration issues after keep settings
*** Fixed realtime graphs responsive design issues
*** Fixed Network Shares users deletion
*** Fixed not all LAN interfaces shown in dropdown in Hotspot service page
*** Fixed modem updater legacy firmware flashing
*** Fixed wireless realtime data to show signal as unavailable with no connected clients
*** Fixed WiFi scanner disconnecting AP users
*** Fixed setup wizard errors in Wireless configuration page
*** Fixed Unicode SSID representation in Wireless scan results
** <b>System</b>
*** Patched FRR CVE-2023-38406
*** Patched FRR CVE-2023-38407
*** Patched FRR CVE-2023-41358
*** Patched FRR CVE-2023-41360
*** Patched FRR CVE-2023-41909
*** Patched FRR CVE-2023-47234
*** Patched FRR CVE-2023-47235
*** Patched OpenSSL CVE-2023-3446
*** Patched OpenSSL CVE-2023-3817
*** Patched LibXML2 CVE-2023-39615
*** Patched LibXML2 CVE-2023-45322
*** Patched FFMPEG CVE-2021-28429
*** Patched FFMPEG CVE-2022-48434
*** Patched dnsmasq CVE-2023-28450
*** Fixed running out of space when SSHFS is mounted in /tmp while generating troubleshoot
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5.4/RUT9M/RUT9M_R_00.07.05.4_WEBUI.bin RUT9M_R_00.07.05.4]</span></b> | 2023.11.09===
===<b><span class="plainlinks">[https://firmware.teltonika-networks.com/7.5.4/RUT9M/RUT9M_R_00.07.05.4_WEBUI.bin RUT9M_R_00.07.05.4]</span></b> | 2023.11.09===
   
   

Revision as of 15:34, 21 December 2023

Main Page > RUT Routers > RUT906 > RUT906 Firmware Downloads

This page contains firmware files for RUT906 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in RUT906 Firmware.

RUT906

File Type Release date Size MD5 Changelog
RUT9M_R_00.07.10_WEBUI.bin Latest FW 2024.10.10 12.81 MB 0a3828cb743d9005ffcbb08b395ae4e4 Link
RUT9M_R_00.07.09.4_WEBUI.bin Mass production FW 2024.10.02 12.75 MB 30b8cf73d51ee54d12a13a1342ded1a6 Link
RUT9M_R_GPL_00.07.10.tar.gz SDK 2024.10.10 21.46 MB 49d4a7006e420c203186313778a76ed4


Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.


FW checksums


Checksums for firmware files can be found here.

Changelog

RUT9M_R_00.07.06 | 2023.12.20

  • New
    • Network
      • Enabled IPv6 by default for mobile interfaces
      • Added operator blacklisting and whitelisting based on mobile country code
      • Added SIM card not inserted event in Events Log
      • Added 802.11v BSS Transition Management and 802.11k Radio Resource Measurement
    • Services
      • Added OPC UA Server
      • Added the ability to set port for TACACS+ in PAM service
      • Added switch to enable using root certificate authority for MQTT alarms in Modbus Client services
      • Added new alarm action "Ubus event" in Modbus Client services
      • Added new input "Modbus alarms" in Data to Server service
      • Added wget ping subtype support in Events Reporting service
      • Added new I/O SNMP OID that returns numeric I/O state
      • Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device
      • Added TLS support for OverIP serial functionality
    • WebUI
      • Added Tailscale VPN support
      • Renewed user interface design
      • Added network interface name change functionality
      • Added last resort configuration option for multiwan policy rules
      • Added indication when new modem firmware is available
      • Added mobile connection establishment display in mobile status page
      • Added default value for "Reset threshold" field in Low Signal Reconnect feature
    • System
      • Added ability to enable/disable SSH access for specific users in System Users
      • API support
      • Added new ADC IC “TLA2021” support
      • Added new Serial IC “CH343” support
  • Improvements
    • Network
      • Disabled operator scan when SIM card is not inserted
    • Services
      • Expanded GRE VPN keep alive functionality to disable routes from unreachable tunnel
      • Added PKCS#12 certificate container authentication method in IPsec VPN
      • Added TLV message_payload support for SNMP service
      • Added Purple.ai configuration profile
      • Replaced option "No leading zeros" with "Remove all zeros" in Over IP serial functionality
      • Added possibility to assign mobile interface in SQM service
      • Added reboot on storage device disappearance and re-appearance
      • Added additional anonymous phone number validation in Mobile Utilities service
      • Added "N/A" signal strength response in DNP3 service if SIM card is not inserted
    • WebUI
      • Improved Events Log page loading by adding asynchronous pagination (pasikeitė puslapiavimo logika nei prieš tai buvusi)
      • Removed requirement for Diffie-Hellman parameters in OpenVPN service
      • Added improvements for creating OpenVPN IPv6 configurations
      • Added auto redirect after changing router's IP address or port
      • Added "Interface" dropdown for interfaces selection in Wake on LAN service
      • Increased Data to Server service MQTT topic length limit to 65535 characters
      • Added OSPF external routes section to Status page
      • Moved device menu entry “Reboot” to header menu
      • Added indication in Overview, Status -> Mobile and WAN pages when mobile data limit is reached
      • Updated Operator state field to show if modem is in limited service
      • Combined Mobile Usage day, week, month and total pages into one
      • Updated Realtime data -> Mobile signal page design to show all available modems and their bands data in one graph
      • Added message when SIM card requires PIN/PUK code in Status -> Mobile page
      • Moved WiFi scanner page to Services section
    • System
      • Added Mosquitto CVE patch 2023-28366
      • Added Mosquitto CVE patch 2023-3592
      • Updated cURL version to 8.4.0
      • Updated kernel version to 5.4.259
      • Added RMS data display to generated troubleshoot
      • Added downloaded Package Manager packages list to generated troubleshoot
      • Added process activity load list to generated troubleshoot
      • Changed default OPKG feed to use Teltonika's URL
  • Fix
    • Network
      • Fixed DMVPN firewall rule creation issues
      • Fixed Failover missing active rules when using multiple source and destination IP addresses
      • Fixed mobile service crash due to buffer overflow while reading partially overwritten SMS
      • Fixed an issue with Manual APN connection making attempts too rapidly
      • Fixed deny data roaming functionality when transitioning between roaming and home operator network
      • Fixed network disconnection on mobile network detach and DHCP lease loss situations
      • Fixed VoLTE configuration after modem reboot
      • Fixed Mobile interface bridge and passthrough mode connectivity loss
      • Fixed an issue where rarely PIN code would get removed after SIM switch
      • Fixed mobile operator list being not updated after changes in WebUI
      • Fixed issue where mobile interface was unreachable after device reboot or interface restart while using Failover service
      • Fixed wireless client authentication failures when using AP and STA with WPA3-SAE authentication
      • Fixed STA connection failure to AP with hidden SSID using WPA3-SAE authentication
      • Fixed incorrect signal strength values in Wireless scan results
    • Services
      • Fixed SSH module enable in PAM service
      • Added minimum free space check when saving logs to flash in Logging service
      • Fixed "Set multiple coils" function sending too many bytes in Modbus Client services
      • Fixed multiple Events Reporting messages being sent when Firewall configuration is changed
      • Fixed VRRP instances advertising wrong virtual IPs
      • Added Hotspot information in SNMP MIB file
      • Fixed registered Hotspot Local Users showing random username
      • Fixed selection of MAC Auth for LAN interfaces in Hotspot service
      • Fixed inconsistent Hotspot login behaviour when using MAC Auth with Password
      • fixed instance shutdown after last local user deletion
      • Fixed Cumulocity app not sending any telemetry data
      • Fixed Call Utilities failure when caller id is hidden during a call
      • Fixed AVL with poor mobile connections
      • Fixed default profile SMS Utilities I/O status rule configuration in Profiles functionality
      • Fixed serial timeout not working in Over IP serial functionality
      • Removed "Echo" option in Modbus TCP over Serial functionality
      • Fixed CRC verification failing when CRC is correct in Modbus TCP over Serial functionality
      • Fixed crash when getting unexpected messages from RTU in Modbus TCP over Serial functionality
      • Fixed RMS I/O data display to return values calculated by formula
    • WebUI
      • Fixed side menu style issues when Japanese language is used
      • Fixed displaying of vendor names in Topology page
      • Fixed language packs being selectable when still in Package Manager queue
      • Added ability to configure IPv6 BGP peer
      • Fixed RelayD configuration issues after keep settings
      • Fixed realtime graphs responsive design issues
      • Fixed Network Shares users deletion
      • Fixed not all LAN interfaces shown in dropdown in Hotspot service page
      • Fixed modem updater legacy firmware flashing
      • Fixed wireless realtime data to show signal as unavailable with no connected clients
      • Fixed WiFi scanner disconnecting AP users
      • Fixed setup wizard errors in Wireless configuration page
      • Fixed Unicode SSID representation in Wireless scan results
    • System
      • Patched FRR CVE-2023-38406
      • Patched FRR CVE-2023-38407
      • Patched FRR CVE-2023-41358
      • Patched FRR CVE-2023-41360
      • Patched FRR CVE-2023-41909
      • Patched FRR CVE-2023-47234
      • Patched FRR CVE-2023-47235
      • Patched OpenSSL CVE-2023-3446
      • Patched OpenSSL CVE-2023-3817
      • Patched LibXML2 CVE-2023-39615
      • Patched LibXML2 CVE-2023-45322
      • Patched FFMPEG CVE-2021-28429
      • Patched FFMPEG CVE-2022-48434
      • Patched dnsmasq CVE-2023-28450
      • Fixed running out of space when SSHFS is mounted in /tmp while generating troubleshoot

RUT9M_R_00.07.05.4 | 2023.11.09

  • Improvements
    • WebUI
      • Improved asynchronous pagination in events log pages
      • Optimized Overview page load
      • Added resource loading cancellation after switching to different page

RUT9M_R_00.07.05 | 2023.10.09

  • New
    • Network
      • Added "shared.m2m.ch" APN for Swisscom IoT operator to APN database
      • Added "gamma" APN to auto-APN database
      • Added "soracom.io" APN for Soracom operator to APN database
      • Added "simbase" APN to auto-APN database
      • Added "pnd" APN for Pond IoT to auto-APN database
      • Added "spitfire1" APN for Spitfire operator to APN database
      • New argument in "gsmctl" CLI command for Carrier aggregation
      • Numeric mode support for modem AT commands
      • Enabled dynamic MTU configuration on mobile interfaces by default
      • WDS support for wireless bridging
    • Services
      • DLMS Client package
      • 7zip package
      • TincVPN package
      • Added router uptime and mobile connection uptime data parameters to SNMP
      • Custom MQTT publisher/subscriber topics definition support
      • Alternative configuration file upload support for MQTT Broker service
      • Device Provisioning Service support for Azure IoT Hub service
      • Added more mobile usage parameters to SNMP
      • JamVM package
      • SIM Idle Protection package
      • Moved SOcat to Package Manager
    • WebUI
      • Firewall status page
      • Page search feature
      • Network Topology page
      • "Allow insecure connection" option for MQTT TLS protocol in Data to Server service
      • Package Restore feature Enable/Disable option
      • Hotspot client connection/disconnection trap option for SNMP service
      • Added Events log trap option for SNMP service
      • Confirm dialog when cancelling a verified package in Package Manager
      • "Bridge ALPN" option for Bridge configuration in MQTT Broker service
      • New subtypes of events that specify a specific port on "Events Reporting" and "SNMP Trap rules" pages
      • Specific firmware packages repository link in Package Manager page
      • Ability to enter decryption passphrase for encrypted private keys
      • "Reconnect" button in RMS page
      • New event "Device startup completed" in Events Reporting service
      • Port status and configuration page
      • Wireless interface QR code generator
      • Channel analysis page Status -> Wireless -> Channel Analysis
      • Disabled direct network interface deletion when it is associated with a wireless interface
      • Limited to a single section configuration and added IP address field for Relayd service
      • "Fast roaming" configuration for Wireless service in Client mode
      • Updated Status->Network->Wireless page to display interfaces as cards and added ability to filter connected clients by selected interface
      • "Write to config" option for SIM Switch action in I/O Juggler service
      • Added formula for analog signal value conversion to other unit value
      • Configurable GPS NMEA prefix
      • Support for using hostnames in "Server address" field for NTRIP service
      • "Start up message" field for Modem control serial utility
      • Modem Debug page
      • APN database management page added to package manager
      • Added "Message forwarding" option in SMS Rules page when rule type is "Execute custom script"
      • Ability to unblock SIM card and insert SIM PIN in Overview page
      • New SMS rules "Reset mobile connection" and "Reload config"
      • "SMS limit clear due" display in Overview page
      • Added modem temperature to System -> Status page
      • New "Server+Client" work mode for OverIP Serial Utility
      • New "Connect on data" action for OverIP Serial Utility
      • Multiple Client instance support for OverIP Serial Utility
      • IP6 table configuration option for DHCPv6 protocol in Network -> WAN page
    • System
      • Mechanism to rebrand WebUI using GPL
      • Possiblity to create web applications with closed-source GPL
  • Improvements
    • Network
      • Moved FRR VTYSH package to package manager
      • Made newly created Firewall Traffic, NAT rules and Port Forwards disabled by default
      • Improved Interfaces to enable IPv6 DHCP server when mobile v6 or v4v6 PDP type is set
      • Improved auto APN selection
      • SMS sending event is now logged into events log
      • Improved roaming control
      • Removed unused APN usernames and passwords from auto-APN database
      • Added connection to the operator when no mobile interfaces are active
      • Improved VoLTE management functions
      • Improved cases where Low Signal Reconnect sometimes executed prematurely
      • Improved wrong SIM PIN remove logic
      • Added automatic reconfiguration when switching between wireless interface modes
      • Added automatically generated name option for new network
      • WPA3/WPA2 (PSK/SAE) mixed mode is now default encryption standard
      • Improved operator information parsing logic on MeiG modem
    • Services
      • New reworked Data to Server
      • UPNP moved to package manager
      • Added IPv6 support for Modbus TCP Server/Client services
      • Refactored Azure IoT Hub service
      • Improved resiliency to timeouts in Modbus Client service
      • Added PDU data type to Modbus read requests
      • Added new formatters for MQTT alarms in Modbus Client service
      • Added main section to make test functions independent in Modbus Client service
      • Improved WAN IP register reading time in Modbus service
      • Sped up default profile and profile template generation for Profiles functionality
      • Optimized profile change time for Profiles functionality
      • Added IPv6 support for Stunnel VPN
      • Added MAC blocking for client connections after set amount of failed login attempts in Hotspot service
      • Improved TCPdump by allowing to capture packets from any interface
      • Added OSPF support for DMVPN
      • Updated Hotspot password hashing to sha512
      • A single SMS message with multiple PDUs is sent instead of multiple SMS messages in Email to SMS service
      • Allowed connection to SMPP server using IPv6 address
      • Extended IP unblock action functionality in SMS Utilities
      • Increased allowed Email to SMS service message size to 61440 bytes
      • Added parameter "%gs" that sends GPS data in formatted info message
      • Updated AVL to prefer checking network status through Failover if configured
      • Added I/O pin name to trap notification message
    • WebUI
      • Reorganized menu
      • Updated header design
      • Split Interfaces configuration in Advanced mode into two pages: WAN and LAN, identically as in Basic WebUI mode
      • Moved Interfaces IPv6 configuration into seperate tab
      • Added client/server status information in OpenVPN instance overview page
      • Added more IPv6 information to interface status in Interfaces page
      • Removed "Custom delegated IPv6-prefix" field from DHCPv6 configuration in Interfaces page
      • Disabled DHCPv6 interface editing while in basic mode
      • Refactored custom DHCP options into seperate modal
      • Added automatic start and end IP allocation for DHCP server configuration in Interfaces
      • Added client/server status information in L2TP VPN page
      • Added "MTU" field to L2TP client configuration page
      • Added CHAP, PAP and MSCHAP-v2 authentication fields to L2TP instance configuration
      • Added more detailed IPsec VPN status information
      • Encryption AES-256-CBC added as default in OpenVPN
      • Added "Authentication algorithm" support to OpenVPN configuration with static key mode
      • Added GRE (DMVPN) VPN tunnel source support to any instead of specific interface
      • Improved Hotspot landing page theme package removal
      • Added upload and download theme functionality to Hotspot Landing page
      • Improved ZeroTier VPN bridge configuration
      • Added ability to adjust order of rules in Firewall page
      • Added IPv6 RAW table to be displayed in Status -> Firewall
      • Improved file upload component"s visual appearance
      • Change "Allow anonymous" option default value to 0 in MQTT Broker
      • Added option to specify "Client ID" in MQTT Publisher
      • Added functionality to select specific interface in Web Filter service
      • Allowed to select FTP server subfolder in Traffic Logging service
      • Renamed various service master/slave naming convention in config files, package names and webUI to client/server
      • Added "Create static" button in Status -> Network -> LAN which bind DHCP lease for device
      • Updated Status -> Network -> Mobile page layout
      • Added bandwidth, provider in Status -> Network -> Mobile page
      • Added colors for signal strength values in Status -> Network -> Mobile page
      • Added frequency, pcid, mcc, mnc and LAC values in Status->Network->Mobile page
      • Refactored network type selection in Network -> Mobile -> General page
      • Serving cell information is not returned anymore when SIM card is not inserted
      • Changed default "Check interval" option value in Network -> Mobile -> SIM Switch page
      • Added button in a Scanned operators table which allows to add an operator to the operator list
      • Added search bar in Mobile Utilities -> SMS Utilities page
      • Added SMS sent and limit count to Network -> Mobile -> General page
      • Added GPS longitude and latitude data in TR069
      • Updated Mobile Signal graphs to show EC/IO and RSCP values when network type is 3G
      • Added DFS channel marking in Network -> Wireless
      • Show wireless MAC address even when interface is inactive in Status -> System page
      • Merged Multi AP configuration to wireless interface edit modal
      • Added automatic network switch to bridge if selected in Wireless configuration
      • Added default encryption for newly created wireless interfaces
      • Simplified "802.11r Fast Transition" configuration options in Wireless interface configuration
      • Added IPv6 support in OverIP serial utility
      • Updated "Change SIM" action type to display configured SIM target in I/O Juggler -> Actions overview page
    • System
      • Updated kernel version to 5.4.251
      • Updated UCI version to 2021-10-22
      • Updated SSHFS version to 3.7.1
      • Updated FRR suite to 8.4.2
      • Updated cURL version to 8.2.0
      • Updated TCPdump version to 4.99.4
      • Updated C-ares version to 1.19.1
      • Updated curl version to 7.88.0
      • Updated iproute2 version to 5.19.0
      • Updated libubox package version to 2021-08-19
      • Added CVE patch CVE-2023-2650
      • Added additional firmware information in CLI prompt banner
      • Connection mode LED now blinks on data transfer
      • Changed "routername" to "devicename" in system config file
      • Made all clients get disconnected out once dropbear service is disabled
      • Improved firmware downgrade restrictions for certain regions
      • Device name is now displayed in browser tab when in WebUI login page
      • Added NF conntrack information in generated troubleshoot archive
  • Fix
    • Network
      • Fixed UDP Broadcast Relay service crashing on start without physical network device
      • Fixed SMS limit period migration
      • Fixed SMS limit size breaking various functionality
      • Fixed custom IPv6 DNS option not overriding default DNS from operator
      • Fixed an issue with blacklist and whitelist connection
      • Fixed multipart SMS handling
      • Changed modem init behavior if Modem Control serial utility feature is enabled
      • Fixed wrong SIM state display when SIM is fully blocked
      • Fixed incorrect virginmobile APN MNC
      • Fixed mobile operator scanning fault when no mobile interfaces are active
      • Fixed mobile interfaces generating multiple events on mobile connection
      • Fixed PDU SMS parsing when operator provides user data header in single part SMS
      • Added scheduled data limit clear for inactive mobile interfaces
      • Fixed wrong or empty WAN state info
      • Fixed Wireless scanning issue with certain configuration
      • Fixed Wireless transmit power changing without user input after saving different country code
      • Fixed clients isolation functionality in Wireless
      • Fixed Wireless STA authentification failure in case of channel change
      • Fixed Multi AP startup when changing Multi AP configuration in Wireless
      • Fixed client connection to EAP Wireless network
      • Fixed LTE band 14 management with Quectel modems
      • Fixed Wireless disconnection issues
      • Fixed connection tracking for main interface in Failover
    • Services
      • Fixed reconnecting to inactive connections for Modbus Server service
      • Fixed Modbus Client response after reboot write request
      • Fixed Modbus Server to show error when trying to get operator name without SIM
      • Updated Modbus Client to handle large numbers of schedule rules, when frequency is set to schedule (Daini
      • Fixed “Input” rule displaying incorrect and missing ports in Network -> Firewall -> Traffic Rules
      • Fixed WireGuard VPN endpoint resolving problem
      • Peer cache is no longer deleted when ZeroTier service is restarted
      • Fixed RMS data collection about the list of devices connected to WiFi
      • Fixed showing incorrect Internet state in RMS
      • Fixed WiFi client info display in RMS
      • Implemented error handling when device is blocked or unrecognized by RMS
      • Fixed L2TP client sometimes not adding routes on successful connection
      • Fixed NTP time sync with browser functionality in some edge cases
      • Fixed reinstalled packages" verification when device name is changed
      • Fixed an issue where signal query would return invalid value instead of error in case of no signal in MQTT Publisher service
      • Fixed OpenVPN firewall rule creation for both IPv4 and IPv6
      • Fixed OpenVPN server crash loop after changing authentification from TLS to Static Key
      • Fixed IPsec VPN connection problem with small lifetime values
      • Fixed IPsec "Default Route" not working when Flow Offloading is enabled
      • Fixed an issue where system directory could be used as a mount point in SSHFS service
      • Fixed IP block feature to unblock an OpenVPN IP address on successful authentification
      • Fixed package installation process bug when packages have different architecture names
      • Added "bearer token" authentication functionality in Dynamic DNS
      • Fixed MQTT Broker "local_port" option keep settings migration
      • Remove public keys when key-based authentication is disabled in Access Control
      • Fixed "Parity" field "Mark" and "Space" options being ignored in DNP3 Serial services
      • Corrected SNMP MIB file syntax according to standards
      • Fixed returned port count in SNMP
      • Fixed disabled CLI remote access taking up a session slot
      • Fixed received SMS messages parsing with trailing whitespaces
      • Fixed VPN status rule message text in SMS Utilities
      • Fixed data being lost when sending large packets to serial devices using OverIP serial utility
      • Fixed OverIP possible serial device overflow and minor bugs
      • More robust error recovery for RTU communication in Modbus Client service
      • Fixed UDP payload size in GPS AVL
      • Fixed user deletion in Network Shares service
      • Fixed router reboot inconsistencies after Storage Memory Expansion
    • WebUI
      • Fixed empty events cards in Overview page when no content is available
      • Fixed modal form inputs not clearing upon closing after nested modal is saved
      • Fixed select menu closing when selecting custom option
      • Fixed multi select expanding table row when adding new values
      • Fixed global section caching after deleting a section in a table
      • Fixed unpredictable search logic in tables
      • Fixed interfaces reordering by metrics in Failover page
      • Removed ability to select ports on ICMP and ESP protocol in Failover page
      • Fixed wrong status when interface is disabled in Failover page
      • Fixed firewall zone and rule creation/deletion on VPN configuration creation/deletion
      • Fixed STP enabling issue in Interfaces
      • Fixed EIGRP status info in Dynamic Routes
      • Fixed issue with custom DHCP options where you could not have multiple values per rule
      • Fixed Routing/NAT Offloading section display in Network -> Firewall -> General Settings when device is not supported
      • Fixed SSH/HTTP/HTTPS/ICMP setting in Network -> Firewall -> Attack Prevention page
      • Fixed failing Firewall rules with united protocol formats
      • Fixed zone select component not closing options menu when selecting an option in Firewall pages
      • Fixed memory leak when cancelling file uploads on Chromium-based browser
      • Fixed group settings saving by removing deprecated ":section" routes in Administration -> User Settings -> System Users
      • Fixed allowing IDs above 247 in Modbus Client service
      • Fixed selecting SIM in Modbus Client service Alarms
      • Fixed Modbus Alarm telephone number limit
      • Fixed to show available options for test requests on error in Modbus Client service
      • Fixed Modbus Alarm I/O pin display values
      • Fixed issue when creating instance named "gre" does not show in GRE VPN
      • Remote endpoint field now allows underscore character in IPsec VPN
      • Fixed ZeroTier wrong service status display in Status -> Services
      • Fixed problems with L2TP/PPTP VPN firewall rules automatic creation
      • Fixed problem related to the enable/disable toggle in OpenVPN instance overview page
      • Added fixes for key-direction missing problem when uploading OpenVPN config file
      • Fixed login page read-only inputs after custom user logout
      • Fixed issue when double clicking firmware upgrade cancel button returned error
      • Fixed Package Manager prompt message to appear when package requires network restart
      • Fixed showing in queue packages when they contained special symbols in the Package Manager page
      • Fixed various visual Side Widget bugs
      • Fixed Data to Server DNP3 filter from flash display
      • Fixed incorrect source data displayed in Realtime Data -> Connections table
      • Fixed memory expansion confirmation prompt title
      • Fixed incorrect configuration saving in Hotspot 2.0 service
      • Disabled password hashing for new user creation in Hotspot service
      • Fixed Hotspot landing page themes saving bug
      • Fixed test email sending to more than one recipient in Events Reporting page
      • Fixed VLAN OID values in SNMP service
      • Output proper error message in case of hardware not being supported in Firmware Upgrade
      • Fixed being able to open side widget when user does not have read access
      • Fixed profile creation when current configuration is not present
      • Fixed wrong protocol data display in "Access control" page
      • Fixed LAN interfaces not showing up before WAN interfaces in Status -> Realtime Data -> Traffic
      • Fixed carrier aggregation information when no connection is made or SIM card is not inserted
      • Changed representation of mobile cell ID from hexadecimal to integer type
      • Fixed Mobile Utilities "SMS forwarding to HTTP" URL generation
      • Fixed an issue where sometimes bands were not represented correctly on certain modems
      • Fixed provider information and IMSI value representation when SIM and modem cannot provide this information
      • Fixed mobile pages throwing 404 error when modem disconnects
      • Fixed WebUI showing mobile connection when no SIM card is inserted
      • Updated Network -> Wireless interface add and delete button visibility in basic mode
      • Fixed Wireless Multi AP incorrect SSID list after removal of an instance
      • Fixed MAC address filtering in Network -> Wireless page to list only connected WiFi devices
      • Fixed "Clear Collect Data" button logic to not clear overall mobile usage info
      • Fixed "Used data" showing large negative numbers for disabled mobile interfaces with Data Limit enabled
      • Fixed GPS AVL I/O trigger option filtering
      • Fixed disabling DLNA service when USB drive is removed
      • Fixed error when user has no write permissions in Speed Test page
    • System
      • Patched CVE-2023-0386 vulnerability
      • Patched CVE-2023-0464 vulnerability
      • Patched CVE-2023-0465 vulnerability
      • Patched CVE-2023-2602 vulnerability
      • Patched CVE-2023-3772 vulnerability
      • Patched CVE-2023-4128 vulnerability
      • Patched CVE-2023-33476 vulnerability
      • Patched CVE-2023-28484 vulnerability
      • Patched CVE-2023-29469 vulnerability
      • Patched CVE-2023-31490 vulnerability
      • Patched CVE-2023-36369 vulnerability
      • Patched CVE-2023-48174 vulnerability
      • Delayed Custom Scripts execution on boot, after storage devices are mounted
      • Fixed Custom Scripts permissions after save
      • Changed certificate expiry calculation mechanism to fix Y2K38 bug
      • Fixed downloading of certificates that have a space in their name in Administration -> Certificates -> Certificates Manager
      • Fixed Events Log database rotation to prevent log partition space exhaustion
      • Fixed duplication and sorting of all events IDs in Events Log
      • Fixed FOTA crash when current hours is with leading 0
      • Fixed crontab job removal after disabling FOTA
      • Changed Mosquitto build options to not include cJSON library
      • Fixed device name resetting to default upon refresh in Administration
      • fixed backup upload validation with memory expansion

RUT9M_R_00.07.04.6 | 2023.09.12

  • Fix
    • WebUI
      • Fixed possible WebUI hang when lots of SMS messages were received in short amount of time

RUT9M_R_00.07.04.5 | 2023.07.24

  • Improvements
    • Network
      • Improved MBN reselection algorithm when switching SIM
      • Improved SIM card change detection algorithm
      • Improved connection establishment speeds after sim switch
      • Added metric field support in BGP Route-maps page
    • WebUI
      • Updated SIM slot labeling in modem card Overview page
  • Fix
    • Network
      • Fixed an issue with MBN selection when device is started for the first time
      • Fixed an issue where MBN activation would not be successful
      • Fixed service provider parsing when operator does not provide all fields for Quectel modems
      • Fixed a condition where mobile connection would not get established after a SIM switch
      • Fixed an issue with SIM switch causing connection problems

RUT9M_R_00.07.04.3 | 2023.05.11

  • New
    • System
      • Initial firmware release