RUTM50 Firmware Downloads

---

This page contains firmware files for RUTM50 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in RUTM50 Firmware.

RUTM50

---

File	Type	Release date	Size	MD5	Changelog
RUTM_R_00.07.10_WEBUI.bin	Latest FW	2024.10.10	24.13 MB	3fa72d84c96910a6af33601027df99ac	Link
RUTM_R_00.07.09.4_WEBUI.bin	Mass production FW	2024.10.02	20.88 MB	236999737199c4ff0dbd0787c4b45a6b	Link

RUTM_R_GPL_00.07.10.tar.gz

SDK

2024.10.10

39.28 MB

be977f830c7307b67c29ef15a0f1fffc

Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.
Note: RUTM50 device firmware cannot be downgraded (only upgrades).

FW checksums

---

Checksums for firmware files can be found here.

Changelog

RUTM_R_00.07.06 | 2023.12.20

* New

• • Network
    • Enabled IPv6 by default for mobile interfaces
    • Added operator blacklisting and whitelisting based on mobile country code
    • Added SIM card not inserted event in Events Log
    • Added 802.11v BSS Transition Management and 802.11k Radio Resource Measurement
  • Services
    • Added OPC UA Server
    • Added the ability to set port for TACACS+ in PAM service
    • Added switch to enable using root certificate authority for MQTT alarms in Modbus Client services
    • Added new alarm action "Ubus event" in Modbus Client services
    • Added new input "Modbus alarms" in Data to Server service
    • Added wget ping subtype support in Events Reporting service
    • Added new I/O SNMP OID that returns numeric I/O state
    • Added new Post/Get service action "mobile_sim_pin" for changing used SIM PIN code on the device
    • Added TLS support for OverIP serial functionality
  • WebUI
    • Added Tailscale VPN support
    • Renewed user interface design
    • Added network interface name change functionality
    • Added last resort configuration option for multiwan policy rules
    • Added indication when new modem firmware is available
    • Added mobile connection establishment display in mobile status page
    • Added default value for "Reset threshold" field in Low Signal Reconnect feature
  • System
    • Added ability to enable/disable SSH access for specific users in System Users
    • API support
• Improvements
  • Network
    • Disabled operator scan when SIM card is not inserted
    • Added two radio support on one SSID in Wireless
  • Services
    • Expanded GRE VPN keep alive functionality to disable routes from unreachable tunnel
    • Added PKCS#12 certificate container authentication method in IPsec VPN
    • Added TLV message_payload support for SNMP service
    • Added Purple.ai configuration profile
    • Replaced option "No leading zeros" with "Remove all zeros" in Over IP serial functionality
    • Added possibility to assign mobile interface in SQM service
    • Added reboot on storage device disappearance and re-appearance
    • Added additional anonymous phone number validation in Mobile Utilities service
    • Added "N/A" signal strength response in DNP3 service if SIM card is not inserted
  • WebUI
    • Improved Events Log page loading by adding asynchronous pagination
    • Removed requirement for Diffie-Hellman parameters in OpenVPN service
    • Added improvements for creating OpenVPN IPv6 configurations
    • Added auto redirect after changing router's IP address or port
    • Added "Interface" dropdown for interfaces selection in Wake on LAN service
    • Increased Data to Server service MQTT topic length limit to 65535 characters
    • Added OSPF external routes section to Status page
    • Moved device menu entry “Reboot” to header menu
    • Added indication in Overview, Status -> Mobile and WAN pages when mobile data limit is reached
    • Updated Operator state field to show if modem is in limited service
    • Combined Mobile Usage day, week, month and total pages into one
    • Updated Realtime data -> Mobile signal page design to show all available modems and their bands data in one graph
    • Added message when SIM card requires PIN/PUK code in Status -> Mobile page

vMoved WiFi scanner page to Services section

• • System
    • Added Mosquitto CVE patch 2023-28366
    • Added Mosquitto CVE patch 2023-3592
    • Updated mt76 package version to 2022-12-22
    • Updated hostapd version to 2023-09-08
    • Updated cURL version to 8.4.0
    • Updated kernel version to 5.10.199
    • Updated Mac80211 version to 6.1.24
    • Added RMS data display to generated troubleshoot
    • Added downloaded Package Manager packages list to generated troubleshoot
    • Added process activity load list to generated troubleshoot
    • Changed default OPKG feed to use Teltonika's URL

• Fix
  • Network
    • Fixed DMVPN firewall rule creation issues
    • Fixed Failover missing active rules when using multiple source and destination IP addresses
    • Fixed mobile service crash due to buffer overflow while reading partially overwritten SMS
    • Fixed an issue with Manual APN connection making attempts too rapidly
    • Fixed deny data roaming functionality when transitioning between roaming and home operator network
    • Fixed network disconnection on mobile network detach and DHCP lease loss situations
    • Fixed VoLTE configuration after modem reboot
    • Fixed Mobile interface bridge and passthrough mode connectivity loss
    • Fixed an issue where rarely PIN code would get removed after SIM switch
    • Fixed mobile operator list being not updated after changes in WebUI
    • Fixed issue where mobile interface was unreachable after device reboot or interface restart while using Failover service
    • Fixed low Wireless mesh throughput
    • Fixed concurrent Wireless STA and AP functionality on 5 GHz band
  • Services
    • Fixed SSH module enable in PAM service
    • Added minimum free space check when saving logs to flash in Logging service
    • Fixed "Set multiple coils" function sending too many bytes in Modbus Client services
    • Fixed multiple Events Reporting messages being sent when Firewall configuration is changed
    • Fixed VRRP instances advertising wrong virtual IPs
    • Added Hotspot information in SNMP MIB file
    • Fixed registered Hotspot Local Users showing random username
    • Fixed selection of MAC Auth for LAN interfaces in Hotspot service
    • Fixed inconsistent Hotspot login behaviour when using MAC Auth with Password
    • Fixed instance shutdown after last local user deletion
    • Fixed Cumulocity app not sending any telemetry data
    • Fixed Call Utilities failure when caller id is hidden during a call
    • Fixed AVL with poor mobile connections
    • Fixed default profile SMS Utilities I/O status rule configuration in Profiles functionality
    • Fixed serial timeout not working in Over IP serial functionality
    • Removed "Echo" option in Modbus TCP over Serial functionality
    • Fixed CRC verification failing when CRC is correct in Modbus TCP over Serial functionality
    • Fixed crash when getting unexpected messages from RTU in Modbus TCP over Serial functionality
    • Fixed mobile cell ID retrieval in TR-069 service
  • WebUI
    • Fixed side menu style issues when Japanese language is used
    • Fixed displaying of vendor names in Topology page
    • Fixed language packs being selectable when still in Package Manager queue
    • Added ability to configure IPv6 BGP peer
    • Fixed RelayD configuration issues after keep settings
    • Fixed realtime graphs responsive design issues
    • Fixed Network Shares users deletion
    • Fixed not all LAN interfaces shown in dropdown in Hotspot service page
    • Fixed modem updater legacy firmware flashing
    • Fixed wireless realtime data to show signal as unavailable with no connected clients
    • Fixed WiFi scanner disconnecting AP users
    • Fixed setup wizard errors in Wireless configuration page
  • System
    • Patched FRR CVE-2023-38406
    • Patched FRR CVE-2023-38407
    • Patched FRR CVE-2023-41358
    • Patched FRR CVE-2023-41360
    • Patched FRR CVE-2023-41909
    • Patched FRR CVE-2023-47234
    • Patched FRR CVE-2023-47235
    • Patched OpenSSL CVE-2023-3446
    • Patched OpenSSL CVE-2023-3817
    • Patched LibXML2 CVE-2023-39615
    • Patched LibXML2 CVE-2023-45322
    • Patched FFMPEG CVE-2021-28429
    • Patched FFMPEG CVE-2022-48434
    • Patched dnsmasq CVE-2023-28450
    • Fixed running out of space when SSHFS is mounted in /tmp while generating troubleshoot

RUTM_R_00.07.05.4 | 2023.11.09

• Improvements
  • WebUI
    • Improved asynchronous pagination in events log pages
    • Optimized Overview page load
    • Added resource loading cancellation after switching to different page

RUTM_R_00.07.05 | 2023.10.09

• New
  • System
    • Initial firmware release