Changes

     <tr>

     <tr>

       <td>Mode</td>

       <td>Mode</td>

       <td>N | Legacy; default: <b>N</b></td>

       <td>{{#ifeq:{{{wifi6}}}| 1 | AX {{!}} N {{!}} Legacy; default: <b>AX</b> | N {{!}} Legacy; default: <b>N</b>}}</td>

       <td>Wireless N (802.11n) supports a maximum theoretical transfer rate of 300mbps with 2 antennas. It can reach up to 450 Mbps with 3 antennas. Though typical speeds are more accurately around 130 Mbps. The legacy standards include 802.11a, 802.11b, and 802.11g.</td>

       <td>Wireless {{#ifeq:{{{wifi6}}}| 1 | AX (802.11ax) supports a maximum theoretical transfer rate of 576mbps with 2 antennas.| N (802.11n) supports a maximum theoretical transfer rate of 300mbps with 2 antennas. It can reach up to 450 Mbps with 3 antennas. Though typical speeds are more accurately around 130 Mbps. The legacy standards include 802.11a, 802.11b, and 802.11g.}}</td>

     </tr>

     </tr>

     <tr>

     <tr>

     <tr>

     <tr>

       <td>Mode</td>

       <td>Mode</td>

       <td>N <nowiki>|</nowiki> AC; default: <b>AC</b></td>

       <td>{{#ifeq:{{{wifi6}}}| 1 | AX {{!}} N {{!}} AC; default: <b>AX</b> | N {{!}} AC; default: <b>AX</b>}}</td>

       <td>Choose between 802.11n and 802.11ac standards.</td>

       <td>Choose between {{#ifeq:{{{wifi6}}}| 1 | 802.11ax,|}} 802.11n and 802.11ac standards.</td>

     </tr>

     </tr>

     <tr>

     <tr>

     <tr>

     <tr>

         <td>Width</td>

         <td>Width</td>

         <td>20 MHz <nowiki>|</nowiki> 40 MHz <nowiki>|</nowiki> 80 MHz; default: <b>80MHz</b></td>

         <td>20 MHz {{!}} 40 MHz {{!}} 80 MHz {{#ifeq:{{{wifi6}}}| 1 | 160 |}}; default: <b>80MHz</b></td>

         <td>A 40 MHz channel width bonds two 20 MHz channels together, forming a 40 MHz channel width, 8 MHZ channel bonds four 20 MHz channels; therefore, it allows for greater speed and faster transfer rates. But not if those channels are crowded with noise and interference. In crowded areas with a lot of frequency noise and interference, a single 20MHz channel will be more stable. 80 MHz width channel is faster than 40MHz which is faster than 20 MHz but it doesn’t perform as well in crowded areas.</td>

         <td>A 40 MHz channel width bonds two 20 MHz channels together, forming a 40 MHz channel width, 8 MHZ channel bonds four 20 MHz channels; therefore, it allows for greater speed and faster transfer rates. But not if those channels are crowded with noise and interference. In crowded areas with a lot of frequency noise and interference, a single 20MHz channel will be more stable. 80 MHz width channel is faster than 40MHz which is faster than 20 MHz but it doesn’t perform as well in crowded areas.</td>

     </tr>

     </tr>