Template:Networking tswos manual static routes: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
Line 63: Line 63:
     <tr>
     <tr>
     <td>Route Type</td>
     <td>Route Type</td>
         <td>unicast | local | broadcast | multicast | unreachable | prohibit | backhole | anycast | -- custom -- ; default: <b>unicast</b></td>
         <td>unicast | local | broadcast | multicast | unreachable | prohibit | backhole | anycast; default: <b>unicast</b></td>
         <td>Selects route type. Each type specifies a different behavior for the route:
         <td>Selects route type. Each type specifies a different behavior for the route:
             <ul>
             <ul>
Line 74: Line 74:
                 <li><b>blackhole</b> - packets that match this type of route are discarded without any response.</li>
                 <li><b>blackhole</b> - packets that match this type of route are discarded without any response.</li>
                 <li><b>anycast</b> - provides a possibility to route incoming requests to multiple different network locations.</li>
                 <li><b>anycast</b> - provides a possibility to route incoming requests to multiple different network locations.</li>
                <li><b>-- custom --</b> - does not use any of the predefined route types.</li>
             </ul>
             </ul>
         </td>
         </td>
Line 133: Line 132:
The <b>Static IPv6 Routes</b> section displays a list of user defined static IPv6 routes and provides the possibility to add and configure new ones. The list is empty by default.
The <b>Static IPv6 Routes</b> section displays a list of user defined static IPv6 routes and provides the possibility to add and configure new ones. The list is empty by default.


[[File:Networking tswos manual static routes static ipv6 routes.png|border|class=tlt-border]]
[[File:Networking tswos manual static routes static ipv6 routes_v1.png|border|class=tlt-border]]


To add a new route and begin editing, simply click the 'Add' button. Refer to the table below for information on static route configuration fields.
To add a new route and begin editing, simply click the 'Add' button. Refer to the table below for information on static route configuration fields.


[[File:Networking tswos manual static routes static ipv6 new routes.png|border|class=tlt-border]]
[[File:Networking tswos manual static routes static ipv6 new routes_v2.png|border|class=tlt-border]]


<table class="nd-mantable">
<table class="nd-mantable">
Line 159: Line 158:
         <td>ip6; default: <b>none</b></td>
         <td>ip6; default: <b>none</b></td>
         <td>A gateway can be any machine in a network that is capable of serving as an access point to another network. Traffic that matches this route will be directed over the IP address specified in this field.</td>
         <td>A gateway can be any machine in a network that is capable of serving as an access point to another network. Traffic that matches this route will be directed over the IP address specified in this field.</td>
    </tr>
    <tr>
    <td>Metric</td>
        <td>integer [0..4294967295]; default: <b>none</b></td>
      <td>The metric value is used as a sorting measure. If a packet about to be routed fits two rules, the one with the lower metric is applied.</td>
     </tr>
     </tr>
     <tr>
     <tr>
Line 167: Line 171:
     <tr>
     <tr>
     <td>Route Type</td>
     <td>Route Type</td>
         <td>unicast | local | broadcast | multicast | unreachable | prohibit | backhole | anycast | -- custom -- ; default: <b>unicast</b></td>
         <td>unicast | local | broadcast | multicast | unreachable | prohibit | backhole | anycast; default: <b>unicast</b></td>
         <td>Selects route type. Each type specifies a different behavior for the route:
         <td>Selects route type. Each type specifies a different behavior for the route:
             <ul>
             <ul>
Line 178: Line 182:
                 <li><b>blackhole</b> - packets that match this type of route are discarded without any response.</li>
                 <li><b>blackhole</b> - packets that match this type of route are discarded without any response.</li>
                 <li><b>anycast</b> - provides a possibility to route incoming requests to multiple different network locations.</li>
                 <li><b>anycast</b> - provides a possibility to route incoming requests to multiple different network locations.</li>
                <li><b>-- custom --</b> - does not use any of the predefined route types.</li>
             </ul>
             </ul>
         </td>
         </td>
    </tr>
    <tr>
    <td>Actions</td>
        <td>-(interactive button)</td>
      <td>Deletes the configuration.</td>
     </tr>
     </tr>
</table>
</table>


[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]

Revision as of 14:49, 19 August 2024

The information in this page is updated in accordance with firmware version .

Static Routes

Routes ensure that network traffic finds its path to a specified host or network, both in local and remote network scenarios. Static routes are simply fixed routing entries in the routing table(s).

This section provides the possibility to configure custom static routes.

Static IPv4 Routes

The Static IPv4 Routes section displays a list of user defined static IPv4 routes and provides the possibility to add and configure new ones. The list is empty by default.

To add a new route and begin editing, simply click the 'Add' button. Refer to the table below for information on static route configuration fields.

Field Value Description
Interface static | dhcp | dhcp6; default: static The zone where the target network resides.
Target* ip4; default: none Destination network address.
IPv4-Netmask* netmask; default: none A netmask is used to divide an IP address into sub-networks (subnets). Combined together, the 'Netmask' and 'Target' values define the exact destination network or IP address to which this route applies.
IPv4-Gateway ip4; default: none A gateway can be any machine in a network that is capable of serving as an access point to another network. Traffic that matches this route will be directed over the IP address specified in this field.
Metric integer [0..4294967295]; default: none The metric value is used as a sorting measure. If a packet about to be routed fits two rules, the one with the lower metric is applied.
MTU integer [68..9200]; default: 1500 Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.
Route Type unicast | local | broadcast | multicast | unreachable | prohibit | backhole | anycast; default: unicast Selects route type. Each type specifies a different behavior for the route:
  • unicast - most common type of route, simply describes a path to a destination.
  • local - routes of this type are added to the 'local' routing table and used only for locally hosted IPs.
  • broadcast - routes of this type are added to the 'local' routing table and used by link layer devices that support the broadcast address principle.
  • multicast - used for distribution of multicast traffic.
  • unreachable - sends an ICMP "unreachable" response to the source address when a request for a routing decision returns a "destination with an unreachable route type" message.
  • prohibit - used to prohibit traffic to specified host or network. When a destination is prohibited, the kernel sends a 'Network is unreachable' response the source address.
  • blackhole - packets that match this type of route are discarded without any response.
  • anycast - provides a possibility to route incoming requests to multiple different network locations.
Actions -(interactive button) Deletes the configuration.

*Additional notes on 'Target' & 'Netmask' fields:

You can define a rule that applies to a single IP like this:

  • Target: some IP
  • Netmask: 255.255.255.255

Furthermore, you can create target/netmask combinations that apply to a range of IPs. Refer to the table below for examples.

Target Netmask Network range
192.168.2.0 255.255.255.240 192.168.2.0 - 192.168.2.15
192.168.2.240 255.255.255.240 192.168.2.240 - 192.168.2.255
192.168.2.161 255.255.255.0 192.168.2.0 - 192.168.55.255
192.168.0.0 255.255.0.0 192.168.0.0 - 192.168.255.255
192.168.2.161 255.255.255.255 192.168.2.161

Static IPv6 Routes

The Static IPv6 Routes section displays a list of user defined static IPv6 routes and provides the possibility to add and configure new ones. The list is empty by default.

To add a new route and begin editing, simply click the 'Add' button. Refer to the table below for information on static route configuration fields.

File:Networking tswos manual static routes static ipv6 new routes v2.png

Field Value Description
Interface static | dhcp | dhcp6; default: static The zone where the target network resides.
Target ip6; default: none Destination network address.
IPv6-Gateway ip6; default: none A gateway can be any machine in a network that is capable of serving as an access point to another network. Traffic that matches this route will be directed over the IP address specified in this field.
Metric integer [0..4294967295]; default: none The metric value is used as a sorting measure. If a packet about to be routed fits two rules, the one with the lower metric is applied.
MTU integer [68..9200]; default: 1500 Sets the maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.
Route Type unicast | local | broadcast | multicast | unreachable | prohibit | backhole | anycast; default: unicast Selects route type. Each type specifies a different behavior for the route:
  • unicast - most common type of route, simply describes a path to a destination.
  • local - routes of this type are added to the 'local' routing table and used only for locally hosted IPs.
  • broadcast - routes of this type are added to the 'local' routing table and used by link layer devices that support the broadcast address principle.
  • multicast - used for distribution of multicast traffic.
  • unreachable - sends an ICMP "unreachable" response to the source address when a request for a routing decision returns a "destination with an unreachable route type" message.
  • prohibit - used to prohibit traffic to specified host or network. When a destination is prohibited, the kernel sends a 'Network is unreachable' response the source address.
  • blackhole - packets that match this type of route are discarded without any response.
  • anycast - provides a possibility to route incoming requests to multiple different network locations.
Actions -(interactive button) Deletes the configuration.

[[Category:{{{name}}} Network section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_tswos_manual_static_routes&oldid=130895"