Template:Networking device manual powering options active poe: Difference between revisions

Revision as of 15:56, 12 November 2024

This chapter contains information on powering options supported by {{{name}}} access points.

The device can be powered by an ethernet cable via the ethernet port

[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]

**RJ45 pinout**:
Pin	10/100 mode B, DC on spares		T568A Color	T568B Color	Pins on plug face (socket is reversed)
1		TX+	white/green stripe	white/orange stripe
2		TX-	green solid	orange solid
3		RX+	white/orange stripe	white/green stripe
4	DC+	44–57 V	blue solid	blue solid
5	DC+	44–57 V	white/blue stripe	white/blue stripe
6		RX-	orange solid	green solid
7	DC-		white/brown stripe	white/brown stripe
8	DC-		brown solid	brown solid

[[Category:{{{name}}} Manual]]

@@ Line 1: / Line 1: @@
-{{#switch: {{{series}}} | RUT206 = | #default = This chapter contains information on <b>powering options</b> supported by {{{name}}} access points.
+This chapter contains information on <b>powering options</b> supported by {{{name}}} access points.
-__TOC__}}
+__TOC__
 ==Active PoE==
 The device can be powered by an ethernet cable via the <b>ethernet</b> port {{#switch: {{{series}}} | TAP100 | TAP200 =. | OTD140 = on the left while another device can be powered by the <b>ethernet</b> port on the right.}}
-{{#switch: {{{series}}} | RUT206 = [[File:{{{file_activepoe}}}|{{{size_activepoe}}}px]] | #default =[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]}}
+[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]
 {{#switch: {{{series}}} | TAP100 | TAP200 =
 <font size="-1">
@@ Line 19: / Line 19: @@
      <li> Working voltage levels: '''42.5–57.0 V'''</li>
 </ul>
-</font>
+</font>}}
-| RUT206 =
-<font size="-1">
-<ul>
-    <li> {{{name}}} devices support active PoE standard: <b>802.3af PoE Class 0 (12.94W)</b></li>
-    <li> Working voltage levels: '''9–57.0 V'''</li>
-</ul>
-</font>
-}}
 {| class="wikitable" style="text-align: left;"