ATRM50 Wireless (Status): Difference between revisions
Created page with "{{Template:Networking_rutos_manual_status_wireless <!------------------------DEVICE-----------------------> | name = ATRM50 | series = ATRM50 }}" |
m TomasG moved page Draft:ATRM50 Wireless (Status) to ATRM50 Wireless (Status) without leaving a redirect |
(No difference)
| |
Latest revision as of 13:41, 22 July 2025
Main Page > ATRM Routers > ATRM50 > ATRM50 Manual > ATRM50 WebUI > ATRM50 Status section > ATRM50 Wireless (Status)The information in this page is updated in accordance with firmware version ATRM50_R_00.07.19.4.
Summary
The Wireless page contains graphs that display various wireless data changes in real time.
This chapter of the user manual provides an overview of the wireless page for ATRM50 devices.
Interfaces
The Interfaces page displays information about all wireless interfaces and clients connected to device.
Wireless interfaces
The Wireless interfaces section contains widgets that display the status of wireless interfaces of the device. The figure below is an example of the widget:
Wireless clients
The Wireless clients section shows various information about all active wireless sessions.
Channel analysis
The Channel analysis section displays the status of all available wireless networks at this moment.
Channel Interference
The Channel Interference section shows interactive diagram of channels interference radio bands that displays real-time allocation of channels in the environment. To start the channel interference scan - press `Perform scan` button.
Scans
The Scans section shows visible wireless networks table. Table can be sort by SSID, signal strength, channel, width, encryption and MAC address. Example below:
Rating
The Rating tab provides quality rating for each channel of selected radio band. The less noise, traffic in channel, the better rate.
